[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] ARM: Xen on Vexpress

On Wed, Jun 11, 2014 at 17:21:22, Julien Grall wrote:
> On 06/11/2014 05:12 PM, Jeenu Viswambharan wrote:
> > The TC2 has 1GB RAM from 0x80000000 to 0xc0000000. The instructions
> > on the Wiki tells u-boot to load it at 0xa0008000 and modifies the
> > DTB accordingly.
> The 0xa0008000 in the u-boot runes is not the address where the kernel
> will be loaded in DOM0. You should see this address in Xen log smth
> like "Loading zImage at...".
> Also, why did you had to modify the DTB? Are you talking about the A7s
> cpus?

Oh, I meant to say the u-boot script inserts some stuff to the FDT using
u-boot commands.

Also, yes, I had to remove the A7 CPUs from the FDT.

> >
> >   (XEN) DOM0: Uncompressing Linux... done, booting the kernel.
> >
> > at the console. The rest is in the log buffer which I can view through
> > the debugger. I've attached the best I could muster.
> It's a bit hard to read. Can you apply the below patch to your Linux
> tree? It will print everything to the Xen console log before the HVC
> console has been initialised.
> [...]

Thanks. I've the logs now, but nothing different from the memory dump.


-- IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium.  Thank you.

ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered 
in England & Wales, Company No:  2557590
ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, 
Registered in England & Wales, Company No:  2548782

Attachment: xen.log
Description: xen.log

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.