[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] IPv6 and other problems



Hi guys!

I have a problem with my Debian/XEN Installation on my rental server. I
activated the bridge modus. But now I miss the eth0 and vif0.0 at my Dom0

This is the result of ifconfig at Dom0:

root@appius:/etc/xen# ifconfig
lo        Link encap:Lokale Schleife
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metrik:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

peth0     Link encap:Ethernet  Hardware Adresse 6c:62:6d:85:ba:ba
          inet6-Adresse: fe80::6e62:6dff:fe85:baba/64
Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metrik:1
          RX packets:6639 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4289 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:520333 (508.1 KiB)  TX bytes:790287 (771.7 KiB)
          Interrupt:206 Basisadresse:0xc000

vif3.0    Link encap:Ethernet  Hardware Adresse fe:ff:ff:ff:ff:ff
          inet6-Adresse: fe80::fcff:ffff:feff:ffff/64
Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metrik:1
          RX packets:246 errors:0 dropped:0 overruns:0 frame:0
          TX packets:312 errors:0 dropped:1 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:32
          RX bytes:19563 (19.1 KiB)  TX bytes:28520 (27.8 KiB)

xenbr0    Link encap:Ethernet  Hardware Adresse 6c:62:6d:85:ba:ba
          inet Adresse:85.10.210.138  Bcast:0.0.0.0  Maske:255.255.255.224
          inet6-Adresse: fe80::6e62:6dff:fe85:baba/64
Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:6018 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3996 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0
          RX bytes:368692 (360.0 KiB)  TX bytes:763412 (745.5 KiB)

Is this correct?! Where is the eth0 and vif0.0?

And now I want to connect the Dom0 and the DomU with ipv6. I have configured
the /etc/network/interface but without eth0?. How can i enable the ipv6
support?

Thanks,

Stefan


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.