[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] IPv6 and other problems



On 12/10/2011 11:47, Stefan Becker wrote:
Hi guys!

I have a problem with my Debian/XEN Installation on my rental server. I
activated the bridge modus. But now I miss the eth0 and vif0.0 at my Dom0

This is the result of ifconfig at Dom0:

root@appius:/etc/xen# ifconfig
lo        Link encap:Lokale Schleife
           inet Adresse:127.0.0.1  Maske:255.0.0.0
           inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
           UP LOOPBACK RUNNING  MTU:16436  Metrik:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           Kollisionen:0 Sendewarteschlangenlänge:0
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

peth0     Link encap:Ethernet  Hardware Adresse 6c:62:6d:85:ba:ba
           inet6-Adresse: fe80::6e62:6dff:fe85:baba/64
Gültigkeitsbereich:Verbindung
           UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metrik:1
           RX packets:6639 errors:0 dropped:0 overruns:0 frame:0
           TX packets:4289 errors:0 dropped:0 overruns:0 carrier:0
           Kollisionen:0 Sendewarteschlangenlänge:1000
           RX bytes:520333 (508.1 KiB)  TX bytes:790287 (771.7 KiB)
           Interrupt:206 Basisadresse:0xc000

vif3.0    Link encap:Ethernet  Hardware Adresse fe:ff:ff:ff:ff:ff
           inet6-Adresse: fe80::fcff:ffff:feff:ffff/64
Gültigkeitsbereich:Verbindung
           UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metrik:1
           RX packets:246 errors:0 dropped:0 overruns:0 frame:0
           TX packets:312 errors:0 dropped:1 overruns:0 carrier:0
           Kollisionen:0 Sendewarteschlangenlänge:32
           RX bytes:19563 (19.1 KiB)  TX bytes:28520 (27.8 KiB)

xenbr0    Link encap:Ethernet  Hardware Adresse 6c:62:6d:85:ba:ba
           inet Adresse:85.10.210.138  Bcast:0.0.0.0  Maske:255.255.255.224
           inet6-Adresse: fe80::6e62:6dff:fe85:baba/64
Gültigkeitsbereich:Verbindung
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
           RX packets:6018 errors:0 dropped:0 overruns:0 frame:0
           TX packets:3996 errors:0 dropped:0 overruns:0 carrier:0
           Kollisionen:0 Sendewarteschlangenlänge:0
           RX bytes:368692 (360.0 KiB)  TX bytes:763412 (745.5 KiB)

Is this correct?! Where is the eth0 and vif0.0?

And now I want to connect the Dom0 and the DomU with ipv6. I have configured
the /etc/network/interface but without eth0…. How can i enable the ipv6
support?

Thanks,

Stefan


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

As you are using network-bridge..
eth0 is renamed to peth0
xenbr0 is created as the bridge
xenbr0 takes on the role as eth0 by being configured the same (IP, subnet, etc.)

On some distros, the bridge is called "eth0" making it an easier transition for the user, but it is only aesthetics.

You could either configure ipv6 on xenbr0 as needed, or edit the xen config and change the bridge name to eth0.

--
May the ping be with you ..


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.