[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] xen-unstable + 4.1.0-rc1: Dom0 kernel stalls in early boot
Monday, April 27, 2015, 4:55:06 PM, you wrote: > Hi David / Konrad, > Today i tried upgrading my dom0 kernel to 4.1-rc1, but it stalls in early > boot. > Xen console was still reponsive so i dumped some info with the debug keys. > Serial log is attached. > The kernel boots fine on baremetal and my previous test kernel that was > pulled > and compiled on 20150423 in the mergewindow boots fine (unfortunately my > scripts > don't add an git commit version to the kernel name yet. > (but the 20150423 version has it's own issue when used as a PV guest kernel > with pci passthrough, pci-front can't connect somehow, which i was trying > to get at .. when i stumbled upon this one :-) ). > -- > Sander Hmm and to add to that .. the 4.1-rc1 also doesn't work in other PV guests (under the 20150423 mergewindow kernel as dom)), from a PV guest console it hangs at: [ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-rc1-20150427+ (root@serveerstertje) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Apr 27 15:05:57 CEST 2015 [ 0.000000] Command line: root=/dev/xvda1 ro [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000000fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] MPS support code is not built-in. [ 0.000000] Using acpi=off or acpi=noirq or pci=noacpi may have problem [ 0.000000] DMI not present or invalid. [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x10000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x0fe00000-0x0fffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fdfffff] [ 0.000000] RAMDISK: [mem 0x02561000-0x03896fff] [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x0ff94000-0x0ff9efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000000fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000fffffff] [ 0.000000] p2m virtual area at ffffc90000000000, size is 200000 [ 0.000000] Remapped 0 page(s) [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] e820: [mem 0x10000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.6-unstable (preserve-AD) [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88000fc00000 s93864 r8192 d29016 u2097152 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64394 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/xvda1 ro [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 214836K/261756K available (11958K kernel code, 987K rwdata, 4520K rodata, 1108K init, 1164K bss, 46920K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:4352 nr_irqs:32 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 3200.182 MHz processor [ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.04 BogoMIPS (lpj=10667273) [ 0.003333] pid_max: default: 32768 minimum: 301 [ 0.003333] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.003333] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003333] Mount-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.003333] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.003333] Initializing cgroup subsys blkio [ 0.003333] Initializing cgroup subsys freezer [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.003333] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.046145] Freeing SMP alternatives memory: 40K (ffffffff8240d000 - ffffffff82417000) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |