[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] pvgrub2 is merged



Il 14/11/2013 22:43, Vladimir 'Ï-coder/phcoder' Serbinenko ha scritto:
On 14.11.2013 22:11, M A Young wrote:
On Thu, 14 Nov 2013, Vladimir 'Ï-coder/phcoder' Serbinenko wrote:

On 14.11.2013 19:57, Vladimir 'Ï-coder/phcoder' Serbinenko wrote:
On 14.11.2013 19:48, M A Young wrote:
On Thu, 14 Nov 2013, Vladimir 'Ï-coder/phcoder' Serbinenko wrote:

On 14.11.2013 18:03, M A Young wrote:

On Thu, 14 Nov 2013, M A Young wrote:

On Wed, 13 Nov 2013, Vladimir 'Ï-coder/phcoder' Serbinenko wrote:

On 13.11.2013 20:06, M A Young wrote:
It doesn't seem to understand sub-partitions. I can get it to
work if
the boot files are in /dev/xvda but not in /dev/xvda1 .

insmod part_msdos
insmod part_gpt
Right, if I add those to the embedded grub.cfg file I get to the
standard grub menu and the boot starts. However the boot doesn't get
very far - it loads the kernel and the initrd file and starts the
kernel but the kernel doesn't see the virtual disks so it doesn't
get
very far.
Using xenstore-ls from the dom0 on the guest when the boot stops the
local/domain/2/device/vbd/51712 section looks like
       backend = "/local/domain/0/backend/vbd/2/51712"
       backend-id = "0"
       state = "6\000"
       virtual-device = "51712"
       device-type = "disk"
       ring-ref = "\000"
       event-channel = "\000"
       protocol = "x86_64-abi\000"

As nothing else has null character endings I suspend that is wrong.

Good catch. Could you test following:
diff --git a/grub-core/kern/xen/init.c b/grub-core/kern/xen/init.c
index 3bfd99f..ab74543 100644
--- a/grub-core/kern/xen/init.c
+++ b/grub-core/kern/xen/init.c
@@ -256,11 +256,10 @@ grub_xenstore_write_file (const char *dir, const
void *buf, grub_size_t len)

   grub_memset (&msg, 0, sizeof (msg));
   msg.type = XS_WRITE;
-  msg.len = dirlen + len + 1;
+  msg.len = dirlen + len;
   grub_xen_store_send (&msg, sizeof (msg));
   grub_xen_store_send (dir, dirlen);
   grub_xen_store_send (buf, len);
-  grub_xen_store_send ("", 1);
   grub_xen_store_recv (&msg, sizeof (msg));
   resp = grub_malloc (msg.len + 1);
   if (!resp)
The section is tidied up, ie.
       backend = "/local/domain/0/backend/vbd/4/51712"
       backend-id = "0"
       state = "6"
       virtual-device = "51712"
       device-type = "disk"
       ring-ref = ""
       event-channel = ""
       protocol = "x86_64-abi"

but unfortunately it doesn't help as the boot process sticks at the
same
point. I notice this section is in state 6 which apparently is
"closed".
I wonder if the kernel expecting something else.
Possible. I'd try this (on top of previous patch):
Sorry, too tired. I meant:
diff --git a/grub-core/disk/xen/xendisk.c b/grub-core/disk/xen/xendisk.c
index c449848..9b71d3a 100644
--- a/grub-core/disk/xen/xendisk.c
+++ b/grub-core/disk/xen/xendisk.c
@@ -449,5 +449,10 @@ grub_xendisk_fini (void)
       grub_xen_free_shared_page (virtdisks[i].shared_page);

       grub_xen_event_channel_op (EVTCHNOP_close, &close_op);
+
+      /* Prepare for handoff.  */
+      grub_snprintf (fdir, sizeof (fdir), "%s/state",
+                    virtdisks[i].frontend_dir);
+      grub_xenstore_write_file (fdir, "0", 1);
     }
}
That doesn't work. However, according to the documentation state 0 is
unknown, and the vif interface (while grub is running) is in state 1
(initializing) so I thought I would try it, and if you replace "0" with
"1" in the above patch then the kernel does boot.

Thanks.
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=c7995256e410c5272e2be2f94faf62d3c9d57b61
and
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=e1aa5b662088cea329fc968af7c819784b6da068
     Michael Young

Thanks for all that have worked for xen support on upstream grub2.

I did a test following informations on one of post before:
git clone git://git.sv.gnu.org/grub.git # commit 61e1b9a49d48035bde52784abb54c3212b647fc8
./autogen.sh
./configure --target=x86_64 --with-platform=xen
mkdir -p boot/grub/
cat > boot/grub/grub.cfg <<EOF
search -s root -f /boot/grub/grub.cfg
configfile /boot/grub/grub.cfg
EOF
./grub-mkstandalone --grub-mkimage=./grub-mkimage -o pvgrub2.xen -O x86_64-xen -d grub-core/ boot/grub/grub.cfg

Latest command give me this warning:
./grub-mkstandalone: warning: cannot open directory `/usr/local/share/locale': File o directory non esistente.

I tried to use it on Sid domU adding this line on domU's xl cfg:
kernel = "/mnt/vm/pvgrub2/grub/pvgrub2.xen"
But vnc show black screen and xl console white screen with only this line on start before refresh:
Welcome to GRUB!

I also tried to add this line:
extra = "(hd0,msdos1)/grub/grub.cfg"
but the result on vnc  and xl console is the same.

I did something wrong?
Output of xl -vvv create on attachment.
If you need more tests and/or details tell me and I'll post them.
Thanks for any reply and sorry for my bad english.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

Attachment: xl-create-vvv.txt
Description: Text document

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.