[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] pl011: preserve RTS and DTR signal on UART init



On Tue, 2013-09-03 at 17:01 +0100, Ian Campbell wrote:
> On Tue, 2013-09-03 at 16:34 +0100, Ian Campbell wrote:
> > On Tue, 2013-09-03 at 16:00 +0200, Andre Przywara wrote:
> > > Although we do not support hardware flow control in the Xen driver
> > > for the PL011 UART, the other end may be configured to use it.
> > > In this case it waits in vain for the RTS signal to be asserted by
> > > the host and will never transmit any characters.
> > > So we leave RTS and DTR as they had been setup before.
> > > This fixes the UART input on Calxeda Midway, which uses hardware
> > > flow control for the serial-over-LAN functionality.
> > > 
> > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx>
> > 
> > Acked + applied, thanks.
> 
> Sent this a bit prematurely, having some issues with a recently upgraded
> build box. Should be pushed soon though.

Done!



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.