[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH] pl011: preserve RTS and DTR signal on UART init
Although we do not support hardware flow control in the Xen driver for the PL011 UART, the other end may be configured to use it. In this case it waits in vain for the RTS signal to be asserted by the host and will never transmit any characters. So we leave RTS and DTR as they had been setup before. This fixes the UART input on Calxeda Midway, which uses hardware flow control for the serial-over-LAN functionality. Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx> --- xen/drivers/char/pl011.c | 7 +++++-- xen/include/asm-arm/pl011-uart.h | 4 ++++ 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c index 3ec6e10..3386e2b 100644 --- a/xen/drivers/char/pl011.c +++ b/xen/drivers/char/pl011.c @@ -85,6 +85,7 @@ static void __init pl011_init_preirq(struct serial_port *port) { struct pl011 *uart = port->uart; unsigned int divisor; + unsigned int cr; /* No interrupts, please. */ pl011_write(uart, IMSC, 0); @@ -120,8 +121,10 @@ static void __init pl011_init_preirq(struct serial_port *port) pl011_write(uart, IMSC, 0); pl011_write(uart, ICR, ALLI); - /* Enable the UART for RX and TX; no flow ctrl */ - pl011_write(uart, CR, RXE | TXE | UARTEN); + /* Enable the UART for RX and TX; keep RTS and DTR */ + cr = pl011_read(uart, CR); + cr &= RTS | DTR; + pl011_write(uart, CR, cr | RXE | TXE | UARTEN); } static void __init pl011_init_postirq(struct serial_port *port) diff --git a/xen/include/asm-arm/pl011-uart.h b/xen/include/asm-arm/pl011-uart.h index 3332c51..123f477 100644 --- a/xen/include/asm-arm/pl011-uart.h +++ b/xen/include/asm-arm/pl011-uart.h @@ -38,6 +38,10 @@ #define DMACR (0x48) /* CR bits */ +#define CTSEN (1<<15) /* automatic CTS hardware flow control */ +#define RTSEN (1<<14) /* automatic RTS hardware flow control */ +#define RTS (1<<11) /* RTS signal */ +#define DTR (1<<10) /* DTR signal */ #define RXE (1<<9) /* Receive enable */ #define TXE (1<<8) /* Transmit enable */ #define UARTEN (1<<0) /* UART enable */ -- 1.7.12.1 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |