|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] IBM HS20 Xen 4.1 and 4.2 Critical Interrupt - Front panel NMI crash
On Tue, Feb 05, 2013 at 06:30:21PM +0200, Pasi Kärkkäinen wrote: > On Tue, Feb 05, 2013 at 04:49:47PM +0100, agya naila wrote: > > Hello Everyone, > > I am quite new on XEN. I tried to installed XEN on my server and I know > > this server series IBM Xeon 3,4 Ghz didn't have Intel VTx support so I am > > pllaning to use paravirtualization. > > I configure the server with Ubuntu Desktop 12.0464 bit as dom0 with XEN > > 4.1 64 hypervisor. The configuration using repositories exactly by this > > tutorial [1]https://help.ubuntu.com/community/XenProposed : > > > > - What exact Xen version are you using? > - What exact Linux dom0 kernel are you using? > - Please paste your grub settings for the Xen entry. > - Did you capture the error/crash logs from the Serial console? (SOL provided > by the blade management). > > <snip> > > > > Now reboot: > > > > sudo reboot > > > > But when rebooting the Dom0 failed to start, enclosed was the error > > message when Xen booting and after that Dom0 will restarting over and > > over. > > On Blade server system log I got error message : > > (Bestak_septaher) SMI Hdlr: 00151743 HI Fatal Error, HI_FERR/NERR Value= > > 0020 > > (Bestak_septaher) Critical Interrupt - Front panel NMI > > Please Suggest, thank you very much for any one help. > Arrfab (CC'd) is actually seeing a similar problem on IBM HS20 blade with Xen 4.2.1 with Linux 3.4.28 dom0 kernel. Does this ring anyone's bells? serial console log of the crash (also available on: http://pastebin.centos.org/1204/): (XEN) Xen version 4.2.1 (mockbuild@(none)) (gcc (GCC) 4.4.6 20120305 (Red Hat 4.4.6-4)) Thu Jan 31 20:36:24 UTC 2013 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: dom0_mem=256M,max:256M loglvl=all guest_loglvl=all com2=19200,8n1 console=com2,vga lapic=debug apic_verbosity=debug apic=debug iommu=off sync_console (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009d400 (usable) (XEN) 000000000009d400 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000d7fb0580 (usable) (XEN) 00000000d7fb0580 - 00000000d7fd0000 (ACPI data) (XEN) 00000000d7fd0000 - 00000000d8000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000128000000 (usable) (XEN) ACPI: RSDP 000FDFE0, 0014 (r0 IBM ) (XEN) ACPI: RSDT D7FCFF80, 0030 (r1 IBM SERBLADE 1000 IBM 45444F43) (XEN) ACPI: FACP D7FCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43) (XEN) ACPI: DSDT D7FBE4A8, 1F2A (r1 IBM SERBLADE 1000 INTL 2002025) (XEN) ACPI: FACS D7FCFD80, 0040 (XEN) ACPI: APIC D7FCFE00, 00A8 (r1 IBM SERBLADE 1000 IBM 45444F43) (XEN) ACPI: MCFG D7FCFDC0, 003C (r1 IBM SERBLADE 1000 IBM 45444F43) (XEN) System RAM: 4095MB (4193588kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000128000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 0009d540 (XEN) DMI 2.3 present. (XEN) APIC boot state is 'xapic' (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x588 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[584,0], pm1x_evt[580,0] (XEN) ACPI: wakeup_vec[d7fcfd8c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:4 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) (XEN) Processor #6 15:4 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 15:4 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) (XEN) Processor #7 15:4 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 13, version 32, address 0xfec10000, GSI 24-47 (XEN) ACPI: IOAPIC (id[0x0c] address[0xfec81000] gsi_base[48]) (XEN) IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71 (XEN) ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72]) (XEN) IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ11 used by override. (XEN) Enabling APIC mode: Flat. Using 4 I/O APICs (XEN) Table is not found! (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs) (XEN) mapped APIC to ffff82c3ffdfe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffdfd000 (fec00000) (XEN) mapped IOAPIC to ffff82c3ffdfc000 (fec10000) (XEN) mapped IOAPIC to ffff82c3ffdfb000 (fec81000) (XEN) mapped IOAPIC to ffff82c3ffdfa000 (fec81400) (XEN) IRQ limits: 96 GSI, 688 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3200.224 MHz processor. (XEN) Initing memory sharing. (XEN) traps.c:3156: GPF (0000): ffff82c48019e43d -> ffff82c4802164d0 (XEN) mce_intel.c:1239: MCA Capability: BCAST 0 SER 0 CMCI 0 firstbank 0 extended MCE MSR 18 (XEN) Intel machine check reporting enabled (XEN) PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. (XEN) PCI: Using MCFG for segment 0000 bus 00-ff (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 50014 (XEN) Getting VERSION: 50014 (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 14-0, 14-16, 14-17, 14-18, 14-19, 14-20, 14-21, 14-22, 14-23, 13-0, 13-1, 13-2, 13-3, 13-4, 13-5, 13-6, 13-7, 13-8, 13-9, 13-10, 13-11, 13-12, 13-13, 13-14, 13-15, 13-16, 13-17, 13-18, 13-19, 13-20, 13-21, 13-22, 13-23, 12-0, 12-1, 12-2, 12-3, 12-4, 12-5, 12-6, 12-7, 12-8, 12-9, 12-10, 12-11, 12-12, 12-13, 12-14, 12-15, 12-16, 12-17, 12-18, 12-19, 12-20, 12-21, 12-22, 12-23, 11-0, 11-1, 11-2, 11-3, 11-4, 11-5, 11-6, 11-7, 11-8, 11-9, 11-10, 11-11, 11-12, 11-13, 11-14, 11-15, 11-16, 11-17, 11-18, 11-19, 11-20, 11-21, 11-22, 11-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #14 registers: 24. (XEN) number of IO-APIC #13 registers: 24. (XEN) number of IO-APIC #12 registers: 24. (XEN) number of IO-APIC #11 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #14...... (XEN) .... register #00: 0E000000 (XEN) ....... : physical APIC id: 0E (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00178020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 1 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 001 01 0 0 0 0 0 1 1 28 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 F1 (XEN) 04 001 01 0 0 0 0 0 1 1 30 (XEN) 05 001 01 0 0 0 0 0 1 1 38 (XEN) 06 001 01 0 0 0 0 0 1 1 40 (XEN) 07 001 01 0 0 0 0 0 1 1 48 (XEN) 08 001 01 0 0 0 0 0 1 1 50 (XEN) 09 001 01 0 0 0 0 0 1 1 58 (XEN) 0a 001 01 0 0 0 0 0 1 1 60 (XEN) 0b 001 01 1 1 0 0 0 1 1 68 (XEN) 0c 001 01 0 0 0 0 0 1 1 70 (XEN) 0d 001 01 0 0 0 0 0 1 1 78 (XEN) 0e 001 01 0 0 0 0 0 1 1 88 (XEN) 0f 001 01 0 0 0 0 0 1 1 90 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #13...... (XEN) .... register #00: 0D000000 (XEN) ....... : physical APIC id: 0D (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00178020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 1 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #12...... (XEN) .... register #00: 0C000000 (XEN) ....... : physical APIC id: 0C (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00178020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 1 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 0C000000 (XEN) ....... : arbitration: 0C (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #11...... (XEN) .... register #00: 0B000000 (XEN) ....... : physical APIC id: 0B (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00178020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 1 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 0B000000 (XEN) ....... : arbitration: 0B (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ241 -> 0:3 (XEN) IRQ48 -> 0:4 (XEN) IRQ56 -> 0:5 (XEN) IRQ64 -> 0:6 (XEN) IRQ72 -> 0:7 (XEN) IRQ80 -> 0:8 (XEN) IRQ88 -> 0:9 (XEN) IRQ96 -> 0:10 (XEN) IRQ104 -> 0:11 (XEN) IRQ112 -> 0:12 (XEN) IRQ120 -> 0:13 (XEN) IRQ136 -> 0:14 (XEN) IRQ144 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 3200.1563 MHz. (XEN) ..... host bus clock speed is 200.0096 MHz. (XEN) ..... bus_scale = 0x0000CCD7 (XEN) Platform timer is 3.579MHz ACPI PM Timer (XEN) Allocated console ring of 32 KiB. (XEN) masked ExtINT on CPU#1 (XEN) masked ExtINT on CPU#2 (XEN) masked ExtINT on CPU#3 (XEN) Brought up 4 CPUs (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) ACPI sleep) Init. ramdisk: ffffffff82b1b000->ffffffff859e5c00 (XEN) Phys-Mach map: ffffffff859e6000->ffffffff85a66000 (XEN) Start info: ffffffff85a66000->ffffffff85a664b4 (XEN) Page tables: ffffffff85a67000->ffffffff85a98000 (XEN) Boot stack: ffffffff85a98000->ffffffff85a99000 (XEN) TOTAL: ffffffff80000000->ffffffff85c00000 (XEN) ENTRY ADDRESS: ffffffff81b1c200 (XEN) Dom0 has maximum 4 VCPUs (XEN) Scrubbing Free RAM: ......................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 252kB init memory. mapping kernel into physical memory about to get started... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.28-6.el6.centos.alt.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Thu Jan 31 22:39:42 UTC 2013 Command line: ro root=/dev/mapper/c6kvm--vg-lv_root rd_NO_LUKS rd_LVM_LV=c6kvm-vg/lv_root LANG=en_US.UTF-8 crashkernel=auto rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=c6kvm-vg/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM earlyprintk=xen console=hvc0 nomodeset initcall_debug debug loglevel=10 Freeing 9d-100 pfn range: 99 pages freed Released 99 pages of unused memory Set 164019 page(s) to 1-1 mapping Populating 10000-10063 pfn range: 99 pages added BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009d000 (usable) Xen: 000000000009d400 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000010063000 (usable) Xen: 0000000010063000 - 00000000d7fb0580 (unusable) Xen: 00000000d7fb0580 - 00000000d7fd0000 (ACPI data) Xen: 00000000d7fd0000 - 00000000d8000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 0000000128000000 (unusable) bootconsole [xenboot0] enabled Notice: NX (Execute Disable) protection missing in CPU! SMBIOS 2.3 present. DMI: IBM IBM BladeCenter HS20 -[8843E6G]-/Server Blade, BIOS -[BWE132AUS-1.13]- 12/19/2008 e820 update range: 000000M SERBLADE 00001000 INTL 02002025) ACPI: FACS 00000000d7fcfd80 00040 ACPI: APIC 00000000d7fcfe00 000A8 (v01 IBM SERBLADE 00001000 IBM 45444F43) ACPI: MCFG 00000000d7fcfdc0 0003C (v01 IBM SERBLADE 00001000 IBM 45444F43) ACPI: Local APIC address 0xfee00000 NUMA turned off Faking a node at 0000000000000000-0000000010063000 Initmem setup node 0 0000000000000000-0000000010063000 NODE_DATA [000000001003d000 - 0000000010062fff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x00010063 On node 0 totalpages: 65520 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3920 pages, LIFO batch:0 DMA32 zone: 842 pages used for memmap DMA32 zone: 60697 pages, LIFO batch:15 ACPI: PM-Timer IO Port: 0x588 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, version 253, address 0xfec00000, GSI 0-253 ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 13, version 253, address 0xfec10000, GSI 24-277 ACPI: IOAPIC (id[0x0c] address[0xfec81000] gsi_base[48]) IOAPIC[2]: apic_id 12, version 253, address 0xfec81000, GSI 48-301 ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72]) IOAPIC[3]: apic_id 11, version 253, address 0xfec81400, GSI 72-325 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ11 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 342 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 0000000000100000 Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000) Booting paravirtualized kernel on Xen Xen version: 4.2.1 (preserve-AD) setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff88000fe00000 s82432 r8192 d24064 u524288 pcpu-alloc: s82432 r8192 d24064 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 64617 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/c6kvm--vg-lv_root rd_NO_LUKS rd_LVM_LV=c6kvm-vg/lv_root LANG=en_US.UTF-8 crashkernel=auto rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=c6kvm-vg/lv_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM earlyprintk=xen console=hvc0 nomodeset initcall_debug debug loglevel=10 PID hash table entries: 1024 (order: 1, 8192 bytes) Placing 64MB software IO TLB between ffff88000b200000 - ffff88000f200000 software IO TLB at phys 0xb200000 - 0xf200000 Memory: 125496k/262540k available (5643k kernel code, 460k absent, 136584k reserved, 5643k data, 1464k init) Hierarchical RCU implementation. NR_IRQS:262400 nr_irqs:1024 16 xen: sci override: global_irq=11 trigger=0 polarity=0 xen: registering gsi 11 triggering 0 polarity 0 xen: --> pirq=11 -> irq=11 (gsi=11) (XEN) IOAPIC[0]: Set PCI routing entry (14-11 -> 0x68 -> IRQ 11 Mode:1 Active:0) xen: acpi sci 11 xen: --> pirq=1 -> irq=1 (gsi=1) xen: --> pirq=2 -> irq=2 (gsi=2) xen: --> pirq=3 -> irq=3 (gsi=3) xen: --> pirq=4 -> irq=4 (gsi=4) xen: --> pirq=5 -> irq=5 (gsi=5) xen: --> pirq=6 -> irq=6 (gsi=6) xen: --> pirq=7 -> irq=7 (gsi=7) xen: --> pirq=8 -> irq=8 (gsi=8) xen: --> pirq=9 -> irq=9 (gsi=9) xen: --> pirq=10 -> irq=10 (gsi=10) xen: --> pirq=12 -> irq=12 (gsi=12) xen: --> pirq=13 -> irq=13 (gsi=13) xen: --> pirq=14 -> irq=14 (gsi=14) xen: --> pirq=15 ->nit_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs calling init_hw_perf_events+0x0/0x44f @ 1 Performance Events: unsupported Netburst CPU model 4 no PMU driver, software events only. initcall init_hw_perf_events+0x0/0x44f returned 0 after 2929 usecs calling register_trigger_all_cpu_backtrace+0x0/0x1f @ 1 initcall register_trigger_all_cpu_backtrace+0x0/0x1f returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x57 @ 1 initcall spawn_ksoftirqd+0x0/0x57 returned 0 after 0 usecs calling init_workqueues+0x0/0x2f5 @ 1 initcall init_workqueues+0x0/0x2f5 returned 0 after 0 usecs calling migration_init+0x0/0x71 @ 1 initcall migration_init+0x0/0x71 returned 0 after 0 usecs calling cpu_stop_init+0x0/0xb6 @ 1 initcall cpu_stop_init+0x0/0xb6 returned 0 after 0 usecs calling rcu_scheduler_really_started+0x0/0x12 @ 1 initcall rcu_scheduler_really_started+0x0/0x12 returned 0 after 0 usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x235 @ 1 initcall tracer_alloc_buffers+0x0/0x235 returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs NMI watchdog: disabled (cpu0): hardware events not enabled installing Xen timer for CPU 1 NMI watchdog: disabled (cpu1): hardware events not enabled installing Xen timer for CPU 2 NMI watchdog: disabled (cpu2): hardware events not enabled installing Xen timer for CPU 3 NMI watchdog: disabled (cpu3): hardware events not enabled Brought up 4 CPUs devtmpfs: initialized calling ipc_ns_init+0x0/0x14 @ 1 initcall ipc_ns_init+0x0/0x14 returned 0 after 0 usecs calling initea returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x41 @ 1 initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 0 usecs calling cpufreq_tsc+0x0/0x37 @ 1 initcall cpufreq_tsc+0x0/0x37 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x1d @ 1 initcall pci_reboot_init+0x0/0x1d returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x20 @ 1 initcall init_lapic_sysfs+0x0/0x20 returned 0 after 0 usecs calling init_smp_flush+0x0/0x38 @ 1 initcall init_smp_flush+0x0/0x38 returned 0 after 0 usecs calling cpu_hotplug_pm_sync_init+0x0/0x2f @ 1 initcall cpu_hotplug_pm_sync_init+0x0/0x2f returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0x1e @ 1 initcall alloc_frozen_cpus+0x0/0x1e returned 0 after 0 usecs calling ksysfs_init+0x0/0x94 @ 1 initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs calling pm_init+0x0/0x66 @ 1 initcall pm_init+0x0/0x66 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x40 @ 1 initcall swsusp_header_init+0x0/0x40 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling init_ftrace_syscalls+0x0/0x77 @ 1 initcall init_ftrace_syscalls+0x0/0x77 returned 0 after 976 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling memory_failure_init+0x0/0xa8 @ 1 initcall memory_failure_init+0x0/0xa8 returned 0 after 0 usecs calling fsnotify_init+0x0/0x26 @ 1 initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs calling filelock_init+0x0/0x2a @ 1 initcall filelock_init+0x0/0x2a returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x31 @ 1 initcall init_misc_binfmt+0x0/0x31 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x16 @ 1 initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x16 @ 1 initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x16 @ 1 initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs calling securityfs_init+0x0/0x53 @ 1 initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs calling random32_init+0x0/0xdb @ 1 initcall random32_init+0x0/0xdb returned 0 after 0 usecs calling sfi_sysfs_init+0x0/0xdb @ 1 i usecs calling dma_bus_init+0x0/0x19 @ 1 initcall dma_bus_init+0x0/0x19 returned 0 after 0 usecs calling dma_channel_table_init+0x0/0x119 @ 1 initcall dma_channel_table_init+0x0/0x119 returned 0 after 0 usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs calling register_xen_pci_notifier+0x0/0x33 @ 1 initcall register_xen_pci_notifier+0x0/0x33 returned 0 after 0 usecs calling dmi_id_init+0x0/0xbe @ 1 initcall dmi_id_init+0x0/0xbe returned 0 after 0 usecs calling pci_arch_init+0x0/0x69 @ 1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: Intel Corporation E7520 Memory Controller Hub with MMCONFIG support PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x69 returned 0 after 76160 usecs calling topology_init+0x0/0xa1 @ 1 initcall topology_init+0x0/0xa1 returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x36 @ 1 initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs calling init_vdso+0x0/0x135 @ 1 initcall init_vdso+0x0/0x135 returned 0 after 0 usecs calling sysenter_setup+0x0/0xbc @ 1 initcall sysenter_setup+0x0/0xbc returned 0 after 0 usecs calling param_sysfs_init+0x0/0x150 @ 1 initcall param_sysfs_init+0x0/0x150 returned 0 after 976 usecs calling pm_sysrq_init+0x0/0x20 @ 1 initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs calling default_bdi_init+0x0/0xaa @ 1 initcall default_bdi_init+0x0/0xaa returned 0 after 0 usecs calling init_bio+0x0/0x10c @ 1 bio: create slab <bio-0> at 0 initcall init_bio+0x0/0x10c returned 0 after 976 usecs calling fsnotify_notification_init+0x0/0x8b @ 1 initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2c @ 1 initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs calling blk_softirq_init+0x0/0x70 @ 1 initcall blk_softirq_init+0x0/0x70 returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x70 @ 1 initbridge window [mem 0xda4000000-0xde3ffffff] pci_root PNP0A08:00: host bridge window [mem 0xd24000000-0xd63ffffff] pci_root PNP0A08:00: host bridge window [mem 0xca4000000-0xce3ffffff] pci_root PNP0A08:00: host bridge window [mem 0xc24000000-0xc63ffffff] pci_root PNP0A08:00: host bridge window [mem 0xba4000000-0xbe3ffffff] pci_root PNP0A08:00: host bridge window [mem 0xb24000000-0xb63ffffff] pci_root PNP0A08:00: host bridge window [mem 0xaa4000000-0xae3ffffff] pci_root PNP0A08:00: host bridge window [mem 0xa24000000-0xa63ffffff] pci_root PNP0A08:00: host bridge window [mem 0x9a4000000-0x9e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x924000000-0x963ffffff] pci_root PNP0A08:00: host bridge window [mem 0x8a4000000-0x8e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x824000000-0x863ffffff] pci_root PNP0A08:00: host bridge window [mem 0x7a4000000-0x7e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x724000000-0x763ffffff] pci_root PNP0A08:00: host bridge window [mem 0x6a4000000-0x6e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x624000000-0x663ffffff] pci_root PNP0A08:00: host bridge window [mem 0x5a4000000-0x5e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x524000000-0x563ffffff] pci_root PNP0A08:00: host bridge window [mem 0x4a4000000-0x4e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x424000000-0x463ffffff] pci_root PNP0A08:00: host bridge window [mem 0x3a4000000-0x3e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x324000000-0x363ffffff] pci_root PNP0A08:00: host bridge window [mem 0x2a4000000-0x2e3ffffff] pci_root PNP0A08:00: host bridge window [mem 0x224000000-0x263ffffff] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xffffffff] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bfffffff] pci_bus 0000:00: root bus resource [mem 0x9a4000000-0x9e3ffffff] 0:03.0s 0000:00: root bus resource [mem 0x924000000-0x963ffffff] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: [8086:359b] type 00 class 0x088000 pci 0000:00:1c.0: [8086:25ae] type 01 class 0x060400 calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:1c.0 pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:1c.0 pci 0000:00:1d.0: [8086:25a9] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 20: [io 0x2200-0x221f] pci 0000:00:1d.1: [8086:25aa] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 20: [io 0x2600-0x261f] pci 0000:00:1d.4: [8086:25ab] type 00 class 0x088000 pci 0000:00:1d.4: reg 10: [mem 0x00000000-0x0000000f] pci 0000:00:1d.5: [8086:25ac] type 00 class 0x080020 pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400 calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:00:1e.0 pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:00:1e.0 pci 0000:00:1f.0: [8086:25a1] type 00 class 0x060100 calling old_ich_force_enable_hpet_user+0x0/0x30 @ 1 for 0000:00:1f.0 pci fixup old_ich_force_enable_hpet_user+0x0/0x30 returned after 0 usecs for 0000:00:1f.0 calling quirk_ich4_lpc_acpi+0x0/0xbc @ 1 for 0000:00:1f.0 pci fixup quirk_ich4_lpc_acpi+0x0/0xbc returned after 0 usecs for 0000:00:1f.0 pci 0000:00:1f.1: [8086:25a2] type 00 class 0x01018a pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0x0000-0x000f] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] pci 0000:00:1f.3: [8086:25a4] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 20: [io 0x0440-0x045f] pci 0000:04:00.0: [8086:0329] type 01 class 0x060400 calling quirk_pcie_pxh+0x0/0x31 @ 1 for 0000:04:00.0 pci 0000:04:00.0: PXH quirk detected; SHPC device MSI disabled pci fixup quirk_pcie_pxh+0x0/0x31 returned after 976 usecs for 0000:04:00.0 calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:04:00.0 pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:04:00.0 pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.2: [8086:032a] type 01 class 0x060400 calling quirk_pcie_pxh+0x0/0x31 @ 1 for 0000:04:00.2 pci 0000:04:00.2: PXH quirk detected; SHPC device MSI disabled pci fixup quirk_pcie_pxh+0x0/0x31 returned after 976 usecs for 0000:04:00.2 calling pci_fixup_transparent_bridge+0x0/0x1d @ 1 for 0000:04:00.2 pci fixup pci_fixup_transparent_bridge+0x0/0x1d returned after 0 usecs for 0000:04:00.2 pci 0000:04:00.2: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:03.0: PCI bridge to [bus 04-06] pci 0000:00:03.0: bridge window [io 0x5000-0xffff] pci 0000:00:03.0: bridge window [mem 0xdb000000-0xdcffffff] pci 0000:04:00.0: PCI bridge to [bus 06-06] pci 0000:04:00.0: bridge window [io 0x5000-0xffff] pci 0000:05:01.0: [14e4:16tive decode) pci 0000:00:1e.0: bridge window [mem 0xd24000000-0xd63ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xca4000000-0xce3ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc24000000-0xc63ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xba4000000-0xbe3ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xb24000000-0xb63ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xaa4000000-0xae3ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xa24000000-0xa63ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x9a4000000-0x9e3ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x924000000-0x963ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x8a4000000-0x8e3ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x824000000-0x863ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x7a40ow [mem 0x2a4000000-0x2e3ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x224000000-0x263ffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xffffffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM (XEN) PCI add device 0000:00:00.0 (XEN) PCI add device 0000:00:00.1 (XEN) PCI add device 0000:00:03.0 (XEN) PCI add device 0000:00:08.0 (XEN) PCI add device 0000:00:1c.0 (XEN) Platform timer appears to have unexpectedly wrapped 1 times. (XEN) traps.c:486:d0 Unhandled nmi fault/trap [#2] on VCPU 0 [ec=0000] (XEN) PCI add device 0000:00:1d.0 (XEN) PCI add device 0000:00:1d.1 (XEN) PCI add device 0000:00:1d.4 (XEN) PCI add device 0000:00:1d.5 (XEN) PCI add device 0000:00:1e.0 (XEN) PCI add device 0000:00:1f.0 (XEN) PCI add device 0000:00:1f.1 (XEN) PCI add device 0000:00:1f.3 (XEN) PCI add device 0000:04:00.0 (XEN) PCI add device 0000:04:00.2 (XEN) PCI add device 0000:05:01.0 (XEN) PCI add device 0000:05:01.1 (XEN) PCI add device 0000:02:01.0 (XEN) PCI add device 0000:01:01.0 initcall acpi_pci_root_init+0x0/0x32 returned 0 after 226527 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LP00] (IRQs *10) ACPI: PCI Interrupt Link [LP01] (IRQs *7) ACPI: PCI Interrupt Link [LP02] (IRQs *5) ACPI: PCI Interrupt Link [LP03] (IRQs *5) ACPI: PCI Interrupt Link [LP04] (IRQs *10) ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP06] (IRQs *10) ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled. initcall acpi_pci_link_init+0x0/0x43 returned 0 after 0 usecs calling pnp_init+0x0/0x19 @ 1 initcall pnp_init+0x0/0x19 returned 0 after 0 usecs calling xen_setup_shutdown_event+0x0/0x30 @ 1 initcall xen_setup_shutdown_event+0x0/0x30 returned 0 after 0 usecs calling balloon_init+0x0/0x133 @ 1 xen/balloon: Initialising balloon driver. initcall balloon_init+0x0/0x133 returned 0 after 0 usecs calling xenbus_probe_backend_init+0x0/0x5e @ 1 initcall xenbus_probe_backend_init+0x0/0x5e returned 0 after 0 usecs calling xenbus_probe_frontend_init+0x0/0x5e @ 1 initcall xenbus_probe_frontend_init+0x0/0x5e returned 0 after 0 usecs calling balloon_init+0x0/0x35 @ 1 xen-balloon: Initialising balloon driver. initcall balloon_init+0x0/0x35 returned 0 after 0 usecs calling ab8500_regulator_init+0x0/0x31 @ 1 initcall ab8500_regulator_init+0x0/0x31 returned 0 after 0 usecs calling misc_init+0x0/0xba @ 1 initcall misc_init+0x0/0xba returned 0 after 0 usecs calling vga_arb_device_init+0x0/0xde @ 1 vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:01.0 initcall vga_arb_device_init+0x0/0xde returned 0 after 0 usecs calling cn_init+0x0/0x9e @ 1 initcall cn_init+0x0/0x9e returned 0 after 0 usecs calling stmpe_init+0x0/0x14 @ 1 initcall stmpe_init+0x0/0x14 returned 0 after 0 usecs calling stmpe_init+0x0/0x12 @ 1 initcall stmpe_init+0x0/0x12 returned 0 after 0 usecs calling wm831x_spi_init+0x0/0x28 @ 1 initcall wm831x_spi_init+0x0/0x28 returned 0 after 0 usecs calling tps65912_spi_init+0x0/0x28 @ 1 initcall tps65912_spi_init+0x0/0x28 returned 0 after 0 usecs calling ezx_pcap_init+0x0/0x12 @ 1 initcall ezx_pcap_init+0x0/0x12 returned 0 after 0 usecs calling da9052_spi_init+0x0/0x31 @ 1 initcall da9052_spi_init+0x0/0x31 returned 0 after 0 usecs calling ab8500_sysctrl_init+0x0/0x12 @ 1 initcall ab8500_sysctrl_ini: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d000 - 000000000009ffff reserve RAM buffer: 0000000010063000 - 0000000013ffffff initcall pci_subsys_init+0x0/0x4f returned 0 after 0 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x1b3 @ 1 initcall net_dev_init+0x0/0x1b3 returned 0 after 0 usecs calling neigh_init+0x0/0x80 @ 1 initcall neigh_init+0x0/0x80 returned 0 after 0 usecs calling fib_rules_init+0x0/0xaf @ 1 initcall fib_rules_init+0x0/0xaf returned 0 after 0 usecs calling pktsched_init+0x0/0xfe @ 1 initcall pktsched_init+0x0/0xfe returned 0 after 0 usecs calling tc_filter_init+0x0/0x55 @ 1 initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs calling tc_action_init+0x0/0x55 @ 1 initcall tc_action_init+0x0/0x55 returned 0 after 0 usecs calling genl_init+0x0/0x84 @ 1 initcall genl_init+0x0/0x84 returned 0 after 0 usecs calling cipso_v4_init+0x0/0x61 @ 1 initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x81 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs calling net_sysctl_init+0x0/0x49 @ 1 initcall net_sysctl_init+0x0/0x49 returned 0 after 0 usecs calling nfc_init+0x0/0x9e @ 1 nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 initcall nfc_init+0x0/0x9e returned 0 after 0 usecs calling ab8500_gpadc_init+0x0/0x12 @ 1 initcall ab8500_gpadc_init+0x0/0x12 returned 0 after 0 usecs calling ab8500_charger_init+0x0/0x12 @ 1 initcall ab8500_charger_init+0x0/0x12 returned 0 after 0 usecs calling ab8500_btemp_init+0x0/0x12 @ 1 initcall ab8500_btemp_init+0x0/0x12 returned 0 after 0 usecs calling ab8500_fg_init+0x0/0x12 @ 1 initcall ab8500_fg_init+0x0/0x12 returned 0 after 0 usecs calling xen_p2m_debugfs+0x0/0x4a @ 1 initcall xen_p2m_debugfs+0x0/0x4a returned 0 after 0 usecs calling hpet_late_init+0x0/0x103 @ 1 initcall hpet_late_init+0x0/0x103 returned -19 after 0 usecs calling init_amd_nbs+0x0/0x3f @ 1 initcall init_amd_nbs+0x0/0x3f returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x5a @ 1 Switching to clocksource xen initcall clocksource_done_booting+0x0/0x5a returned 0 after 8 usecs calling ftrace_init_debugfs+0x0/0xdx314 @ 1 initcall tracer_init_debugfs+0x0/0x314 returned 0 after 156 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 5 usecs calling event_trace_init+0x0/0x1bb @ 1 initcall event_trace_init+0x0/0x1bb returned 0 after 13106 usecs calling init_kprobe_trace+0x0/0x93 @ 1 initcall init_kprobe_trace+0x0/0x93 returned 0 after 7 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 30 usecs calling eventpoll_init+0x0/0xda @ 1 initcall eventpoll_init+0x0/0xda returned 0 after 106 usecs calling anon_inode_init+0x0/0x5b @ 1 initcall anon_inode_init+0x0/0x5b returned 0 after 17 usecs calling tomoyo_initerface_init+0x0/0x17d @ 1 initcall tomoyo_initerface_init+0x0/0x17d returned 0 after 0 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs calling acpi_event_init+0x0/0x81 @ 1 initcall acpi_event_init+0x0/0x81 returned 0 after 18 usecs calling pnp_system_init+0x0/0x12 @ 1 initcall pnp_system_init+0x0/0x12 returned 0 after 24 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0xf24000000-0xfffffffff window] pnp 00:00: [mem 0xea4000000-0xee3ffffff window] pnp 00:00: [mem 0xe24000000-0xe63ffffff window] pnp 00:00: [mem 0xda4000000-0xde3ffffff window] pnp 00:00: [mem 0xd24000000-0xd63ffffff window] pnp 00:00: [mem 0xca4000000-0xce3ffffff window] pnp 00:00: [mem 0xc24000000-0xc63ffffff window] pnp 00:00: [mem 0xba4000000-0xbe3ffsign_resources+0x0/0xf8 @ 1 pci 0000:00:1c.0: BAR 15: assigned [mem 0xd8000000-0xd80fffff pref] pci 0000:00:1f.1: BAR 5: assigned [mem 0xd8100000-0xd81003ff] pci 0000:00:1d.4: BAR 0: assigned [mem 0xd8100400-0xd810040f] pci 0000:00:1f.1: BAR 4: assigned [io 0x1000-0x100f] pci 0000:04:00.0: PCI bridge to [bus 06-06] pci 0000:04:00.0: bridge window [io 0x5000-0xffff] pci 0000:04:00.2: PCI bridge to [bus 05-05] pci 0000:04:00.2: bridge window [mem 0xdb000000-0xdcffffff] pci 0000:00:03.0: PCI bridge to [bus 04-06] pci 0000:00:03.0: bridge window [io 0x5000-0xffff] pci 0000:00:03.0: bridge window [mem 0xdb000000-0xdcffffff] pci 0000:02:01.0: BAR 6: assigned [mem 0xd8000000-0xd80fffff pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0xdd000000-0xdeffffff] pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd80fffff pref] pci 0000:01:01.0: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf8ffffff] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref] xen: registering gsi 16 triggering 0 pole 0 [io 0x5000-0xffff] pci_bus 0000:04: resource 1 [mem 0xdb000000-0xdcffffff] pci_bus 0000:06: resource 0 [io 0x5000-0xffff] pci_bus 0000:05: resource 1 [mem 0xdb000000-0xdcffffff] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdeffffff] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff pref] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf8ffffff] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref] pci_bus 0000:01: resource 4 [mem 0xf24000000-0xfffffffff] pci_bus 0000:01: resource 5 [mem 0xea4000000-0xee3ffffff] pci_bus 0000:01: resource 6 [mem 0xe24000000-0xe63ffffff] pci_bus 0000:01: resource 7 [mem 0xda4000000-0xde3ffffff] pci_bus 0000:01: resource 8 [mem 0xd24000000-0xd63ffffff] pci_bus 0000:01: resource 9 [mem 0xca4000000-0xce3ffffff] pci_bus 0000:01: resource 10 [mem 0xc24000000-0xc63ffffff] pci_bus 0000:01: resource 11 [mem 0xba4000000-0xbe3ffffff] pci_bus 0000:01: resource 12 [mem 0xb24000000-0xb63ffffff] pci_bus 0000:01: resource 13 [mem 0xaa4000000-0xae3ffffff] pci_bus 0000:01: resource 14 [mem 0xa24000000-0xa63ffffff] pci_bus 0000:01: resource 15 [mem 0x9a4000000-0x9e3ffffff] pci_bus 0000:01: resource 16 [mem 0x924000000-0x963ffffff] pci_bus 0000:01: resource 17 [mem 0x8a4000000-0x8e3ffffff] pci_bus 0000:01: resource 18 [mem 0x824000000-0x863ffffff] pci_bus 0000:01: resource 19 [mem 0x7a4000000-0x7e3ffffff] pci_bus 0000:01: resource 20 [mem 0x724000000-0x763ffffff] pci_bus 0000:01: resource 21 [mem 0x6a4000000-0x6e3ffffff] pci_bus 0000:01: resource 22 [mem 0x624000000-0x663ffffff] pci_bus 0000:01: resource 23 [mem 0x5a4000000-0x5e3ffffff] pci_bus 0000:01: resource 24 [mem 0x524000000-0x563ffffff] pci_bus 0000:01: resource 25 [mem 0x4a4000000-0x4e3ffffff] pci_bus 0000:0?[2J -- Pasi _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |