|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH] xen PVonHVM: require at least Xen 3.4 as dom0
On Wed, Oct 31, 2012 at 12:21:28PM +0200, Pasi Kärkkäinen wrote: > On Wed, Oct 31, 2012 at 10:29:25AM +0100, Olaf Hering wrote: > > On Wed, Oct 31, Ian Campbell wrote: > > > > > If I understand correctly this requirements comes from the need to > > > support moving the shared info page in order to support kexec? > > > > > > So could we do something more fine grained and limit only the kexec > > > support (and therefore the movement of the SI into that range) to 3.4+? > > > > Its not strictly about kexec. The other patch I sent out will place the > > shared info page at 0xFE700000. If that range is not within a > > E820_Reserved area and if the old hvmloader makes allocations within > > that range, that other patch needs to be changed so that the shared info > > page is done either at 0xFE700000 or within RESERVE_BRK (as it is done > > currently). > > > > Is the source code of that old RHEL available somewhere, did they patch > > hvmloader at all? Providing a E820 map from a guest which was started on > > such old dom0 would be a good start. > > > > http://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/os/SRPMS/xen-3.0.3-135.el5_8.5.src.rpm > That's the userland, actual Xen hypervisor is in the kernel src.rpm. > > I can provide a dmesg from a guest later today. > dmesg from a Fedora 17 PVHVM guest with Linux 3.5.4, running on RHEL 5.8 Xen dom0: [ 0.000000] Linux version 3.5.4-1.fc17.x86_64 (mockbuild@) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Mon Sep 17 15:03:59 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.4-1.fc17.x86_64 root=/dev/mapper/vg_f17x64hvm01-lv_root ro rd.lvm.lv=vg_f17x64hvm01/lv_root rd.md=0 rd.dm=0 SYSFONT=T rue KEYTABLE=fi rd.luks=0 rd.lvm.lv=vg_f17x64hvm01/lv_swap LANG=en_US.UTF-8 rhgb [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffabff] usable [ 0.000000] BIOS-e820: [mem 0x000000003fffac00-0x000000003fffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Red Hat HVM domU, BIOS 3.1.2-308.13.1.el5 09/27/2012 [ 0.000000] Hypervisor detected: Xen HVM [ 0.000000] Xen version 3.1. [ 0.000000] Xen Platform PCI: I/O protocol version 1 [ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs. [ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks. [ 0.000000] You might have to change the root device [ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d] [ 0.000000] in your root= kernel command line option [ 0.000000] HVMOP_pagetable_dying not supported [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x3fffa max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-D3FFF write-back [ 0.000000] D4000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FF00000000 write-back [ 0.000000] 4 base 0200000000 mask FE00000000 write-back [ 0.000000] 5 base 0400000000 mask FC00000000 write-back [ 0.000000] 6 base 0800000000 mask FC00000000 write-back [ 0.000000] 7 base 0C00000000 mask FFC0000000 write-back [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x3fff9fff] [ 0.000000] [mem 0x00000000-0x3fdfffff] page 2M [ 0.000000] [mem 0x3fe00000-0x3fff9fff] page 4k [ 0.000000] kernel direct mapping tables up to 0x3fff9fff @ [mem 0x1fdfe000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x36398000-0x371c3fff] [ 0.000000] ACPI: RSDP 00000000000eb340 00024 (v02 Xen) [ 0.000000] ACPI: XSDT 00000000000eb2b0 00044 (v01 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: FACP 00000000000eb0c0 000F4 (v04 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: DSDT 00000000000ea050 00FEA (v02 Xen HVM 00000000 INTL 20110413) [ 0.000000] ACPI: FACS 00000000000ea010 00040 [ 0.000000] ACPI: APIC 00000000000eb1c0 00072 (v02 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: HPET 00000000000eb240 00038 (v01 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: SSDT 00000000000eb278 00038 (v02 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fff9fff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3fff9fff] [ 0.000000] NODE_DATA [mem 0x3ffe6000-0x3fff9fff] [ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3fff9fff] [ 0.000000] On node 0 totalpages: 262025 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4032 pages used for memmap [ 0.000000] DMA32 zone: 254010 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1f48 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ7 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0x40000000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen HVM [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s83136 r8192 d23360 u2097152 [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257923 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.4-1.fc17.x86_64 root=/dev/mapper/vg_f17x64hvm01-lv_root ro rd.lvm.lv=vg_f17x64hvm01/lv_root rd.md=0 rd.dm=0 SYSFONT=True KEYTABLE=fi rd.luks=0 rd.lvm.lv=vg_f17x64hvm01/lv_swap LANG=en_US.UTF-8 rhgb [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1000920k/1048552k available (6243k kernel code, 452k absent, 47180k reserved, 6940k data, 1016k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:8448 nr_irqs:256 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Cannot get hvm parameter 18: -22! [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2266.865 MHz processor. [ 0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.73 BogoMIPS (lpj=2266865) [ 0.002011] pid_max: default: 32768 minimum: 301 [ 0.002042] Security Framework initialized [ 0.002051] SELinux: Initializing. [ 0.002064] SELinux: Starting in permissive mode [ 0.002246] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.002574] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.003077] Mount-cache hash table entries: 256 [ 0.003313] Initializing cgroup subsys cpuacct [ 0.003320] Initializing cgroup subsys memory [ 0.003334] Initializing cgroup subsys devices [ 0.003339] Initializing cgroup subsys freezer [ 0.003343] Initializing cgroup subsys net_cls [ 0.003347] Initializing cgroup subsys blkio [ 0.003351] Initializing cgroup subsys perf_event [ 0.003453] mce: CPU supports 0 MCE banks [ 0.003693] SMP alternatives: switching to UP code [ 0.025713] Freeing SMP alternatives: 24k freed [ 0.025736] ACPI: Core revision 20120320 [ 0.026449] ftrace: allocating 23073 entries in 91 pages [ 0.039831] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.049847] CPU0: Intel(R) Xeon(R) CPU L5640 @ 2.27GHz stepping 02 [ 0.049996] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. [ 0.049996] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.049996] Brought up 1 CPUs [ 0.049996] Total of 1 processors activated (4533.73 BogoMIPS). [ 0.051186] devtmpfs: initialized [ 0.052641] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.052680] RTC time: 11:39:09, date: 10/31/12 [ 0.052726] NET: Registered protocol family 16 [ 0.053044] ACPI: bus type pci registered [ 0.053398] PCI: Using configuration type 1 for base access [ 0.054494] bio: create slab <bio-0> at 0 [ 0.054574] ACPI: Added _OSI(Module Device) [ 0.054579] ACPI: Added _OSI(Processor Device) [ 0.054583] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.054587] ACPI: Added _OSI(Processor Aggregator Device) [ 0.055150] ACPI: EC: Look up EC in DSDT [ 0.056561] ACPI: Interpreter enabled [ 0.056569] ACPI: (supports S0 S5) [ 0.056586] ACPI: Using IOAPIC for interrupt routing [ 0.058580] ACPI: No dock devices found. [ 0.058589] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.058623] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.058662] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.058668] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.058674] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.058680] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf4ffffff] [ 0.058719] PCI host bridge to bus 0000:00 [ 0.058725] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.058730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.058734] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.058740] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xf4ffffff] [ 0.058888] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.060341] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.062468] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.063798] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f] [ 0.064737] pci 0000:00:01.2: [8086:7113] type 00 class 0x068000 [ 0.066604] pci 0000:00:01.2: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI [ 0.067167] pci 0000:00:01.3: [8086:7020] type 00 class 0x0c0300 [ 0.068505] pci 0000:00:01.3: reg 20: [io 0xc020-0xc03f] [ 0.069531] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.069840] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref] [ 0.070066] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff] [ 0.071671] pci 0000:00:03.0: [5853:0001] type 00 class 0x010000 [ 0.072032] pci 0000:00:03.0: reg 10: [io 0xc100-0xc1ff] [ 0.072275] pci 0000:00:03.0: reg 14: [mem 0xf3000000-0xf3ffffff pref] [ 0.074114] pci 0000:00:06.0: [8086:10ed] type 00 class 0x020000 [ 0.075080] pci 0000:00:06.0: reg 10: [mem 0xf4020000-0xf4023fff 64bit] [ 0.076389] pci 0000:00:06.0: reg 1c: [mem 0xf4024000-0xf4027fff 64bit] [ 0.079467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.079705] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.083474] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) [ 0.083650] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 0.083822] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) [ 0.084068] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) [ 0.084195] xen/balloon: Initialising balloon driver. [ 0.084212] xen-balloon: Initialising balloon driver. [ 0.084340] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.084348] vgaarb: loaded [ 0.084351] vgaarb: bridge control possible 0000:00:02.0 [ 0.084431] SCSI subsystem initialized [ 0.084468] libata version 3.00 loaded. [ 0.084501] ACPI: bus type usb registered [ 0.084524] usbcore: registered new interface driver usbfs [ 0.084537] usbcore: registered new interface driver hub [ 0.084562] usbcore: registered new device driver usb [ 0.084626] PCI: Using ACPI for IRQ routing [ 0.084631] PCI: pci_cache_line_size set to 64 bytes [ 0.085209] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.085212] e820: reserve RAM buffer [mem 0x3fffac00-0x3fffffff] [ 0.085323] NetLabel: Initializing [ 0.085328] NetLabel: domain hash size = 128 [ 0.085331] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.085344] NetLabel: unlabeled traffic allowed by default [ 0.085416] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.085431] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.085438] hpet0: 3 comparators, 64-bit 70.836816 MHz counter [ 0.088026] Switching to clocksource hpet [ 0.096355] pnp: PnP ACPI init [ 0.096371] ACPI: bus type pnp registered [ 0.096392] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.096425] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.096433] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.096465] pnp 00:01: [bus 00-ff] [ 0.096468] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.096471] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.096473] pnp 00:01: [io 0x0d00-0xffff window] [ 0.096476] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.096479] pnp 00:01: [mem 0xf0000000-0xf4ffffff] [ 0.096503] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.096513] pnp 00:02: [io 0x10c0-0x10c2] [ 0.096516] pnp 00:02: [io 0xb044-0xb047] [ 0.096545] system 00:02: [io 0x10c0-0x10c2] has been reserved [ 0.096551] system 00:02: [io 0xb044-0xb047] has been reserved [ 0.096557] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.096811] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.096835] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.096857] pnp 00:04: [io 0x0010-0x001f] [ 0.096859] pnp 00:04: [io 0x0022-0x002d] [ 0.096862] pnp 00:04: [io 0x0030-0x003f] [ 0.096864] pnp 00:04: [io 0x0044-0x005f] [ 0.096866] pnp 00:04: [io 0x0062-0x0063] [ 0.096868] pnp 00:04: [io 0x0065-0x006f] [ 0.096871] pnp 00:04: [io 0x0072-0x007f] [ 0.096873] pnp 00:04: [io 0x0080] [ 0.096875] pnp 00:04: [io 0x0084-0x0086] [ 0.096877] pnp 00:04: [io 0x0088] [ 0.096879] pnp 00:04: [io 0x008c-0x008e] [ 0.096882] pnp 00:04: [io 0x0090-0x009f] [ 0.096884] pnp 00:04: [io 0x00a2-0x00bd] [ 0.096886] pnp 00:04: [io 0x00e0-0x00ef] [ 0.096888] pnp 00:04: [io 0x08a0-0x08a3] [ 0.096891] pnp 00:04: [io 0x0cc0-0x0ccf] [ 0.096893] pnp 00:04: [io 0x04d0-0x04d1] [ 0.096932] system 00:04: [io 0x08a0-0x08a3] has been reserved [ 0.096939] system 00:04: [io 0x0cc0-0x0ccf] has been reserved [ 0.096944] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.096950] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.096964] pnp 00:05: [dma 4] [ 0.096966] pnp 00:05: [io 0x0000-0x000f] [ 0.096969] pnp 00:05: [io 0x0081-0x0083] [ 0.096971] pnp 00:05: [io 0x0087] [ 0.096973] pnp 00:05: [io 0x0089-0x008b] [ 0.096976] pnp 00:05: [io 0x008f] [ 0.096978] pnp 00:05: [io 0x00c0-0x00df] [ 0.096980] pnp 00:05: [io 0x0480-0x048f] [ 0.097002] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.097063] pnp 00:06: [io 0x0070-0x0071] [ 0.097084] pnp 00:06: [irq 8] [ 0.097115] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.097125] pnp 00:07: [io 0x0061] [ 0.097147] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.097185] pnp 00:08: [irq 12] [ 0.097212] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.097230] pnp 00:09: [io 0x0060] [ 0.097232] pnp 00:09: [io 0x0064] [ 0.097251] pnp 00:09: [irq 1] [ 0.097279] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.097299] pnp 00:0a: [io 0x03f0-0x03f5] [ 0.097301] pnp 00:0a: [io 0x03f7] [ 0.097319] pnp 00:0a: [irq 6] [ 0.097322] pnp 00:0a: [dma 2] [ 0.097346] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.097372] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.097391] pnp 00:0b: [irq 4] [ 0.097419] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.097565] pnp: PnP ACPI: found 12 devices [ 0.097570] ACPI: ACPI bus type pnp unregistered [ 0.103895] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.103899] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.103902] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.103904] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xf4ffffff] [ 0.103942] NET: Registered protocol family 2 [ 0.104059] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.104396] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.104917] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.105164] TCP: Hash tables configured (established 131072 bind 65536) [ 0.105169] TCP: reno registered [ 0.105178] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.105191] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.105254] NET: Registered protocol family 1 [ 0.105268] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.105329] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.105405] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.105882] pci 0000:00:02.0: Boot video device [ 0.106032] PCI: CLS 0 bytes, default 64 [ 0.106076] Unpacking initramfs... [ 0.514071] Freeing initrd memory: 14512k freed [ 0.520187] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.520475] audit: initializing netlink socket (disabled) [ 0.520493] type=2000 audit(1351683549.519:1): initialized [ 0.548550] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.550379] VFS: Disk quotas dquot_6.5.2 [ 0.550435] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.550892] msgmni has been set to 1983 [ 0.550959] SELinux: Registering netfilter hooks [ 0.551447] alg: No test for stdrng (krng) [ 0.551455] NET: Registered protocol family 38 [ 0.551501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.551540] io scheduler noop registered [ 0.551544] io scheduler deadline registered [ 0.551580] io scheduler cfq registered (default) [ 0.551684] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.551709] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.551714] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.551777] acpiphp: Slot [1] registered [ 0.551797] acpiphp: Slot [2] registered [ 0.551909] efifb: probing for efifb [ 0.552061] efifb: framebuffer at 0xf0000000, mapped to 0xffffc90000500000, using 1408k, total 1408k [ 0.552068] efifb: mode is 800x600x24, linelength=2400, pages=1 [ 0.552071] efifb: scrolling: redraw [ 0.552075] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.554963] Console: switching to colour frame buffer device 100x37 [ 0.557505] fb0: EFI VGA frame buffer device [ 0.557558] intel_idle: does not run on family 6 model 44 [ 0.559150] GHES: HEST is not enabled! [ 0.560329] Grant tables using version 1 layout. [ 0.561053] Grant table initialized [ 0.563974] Cannot get hvm parameter 18: -22! [ 0.564057] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.564761] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 [ 0.567223] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 [ 0.568715] Non-volatile memory driver v1.3 [ 0.569901] Linux agpgart interface v0.103 [ 0.571940] loop: module loaded [ 0.573169] ata_piix 0000:00:01.1: version 2.13 [ 0.573412] ata_piix 0000:00:01.1: setting latency timer to 64 [ 0.573953] scsi0 : ata_piix [ 0.575153] scsi1 : ata_piix [ 0.576294] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 [ 0.577438] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 [ 0.579517] Fixed MDIO Bus: probed [ 0.581517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.582644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.583781] uhci_hcd: USB Universal Host Controller Interface driver [ 0.585135] uhci_hcd 0000:00:01.3: setting latency timer to 64 [ 0.585173] uhci_hcd 0000:00:01.3: UHCI Host Controller [ 0.586346] uhci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 1 [ 0.587784] uhci_hcd 0000:00:01.3: irq 23, io base 0x0000c020 [ 0.589922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.591061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.592231] usb usb1: Product: UHCI Host Controller [ 0.593403] usb usb1: Manufacturer: Linux 3.5.4-1.fc17.x86_64 uhci_hcd [ 0.594585] usb usb1: SerialNumber: 0000:00:01.3 [ 0.595842] hub 1-0:1.0: USB hub found [ 0.597033] hub 1-0:1.0: 2 ports detected [ 0.598354] usbcore: registered new interface driver usbserial [ 0.599501] usbcore: registered new interface driver usbserial_generic [ 0.600611] USB Serial support registered for generic [ 0.601705] usbserial: USB Serial Driver core [ 0.602837] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.606311] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.607478] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.608710] mousedev: PS/2 mouse device common for all mice [ 0.610891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.618267] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.619536] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.626404] device-mapper: uevent: version 1.0.3 [ 0.629046] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 0.630380] cpuidle: using governor ladder [ 0.631644] cpuidle: using governor menu [ 0.632955] EFI Variables Facility v0.08 2004-May-17 [ 0.634343] usbcore: registered new interface driver usbhid [ 0.635674] usbhid: USB HID core driver [ 0.636960] drop_monitor: Initializing network drop monitor service [ 0.638351] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.639670] TCP: cubic registered [ 0.640945] Initializing XFRM netlink socket [ 0.642333] NET: Registered protocol family 10 [ 0.643824] mip6: Mobile IPv6 [ 0.645084] NET: Registered protocol family 17 [ 0.646337] Key type dns_resolver registered [ 0.647724] PM: Hibernation image not present or could not be loaded. [ 0.647735] registered taskstats version 1 [ 0.649679] XENBUS: Device with no driver: device/vbd/768 [ 0.650905] XENBUS: Device with no driver: device/vbd/5632 [ 0.652099] XENBUS: Device with no driver: device/pci/0 [ 0.653302] XENBUS: Device with no driver: device/vif/0 [ 0.654508] Magic number: 0:653:682 [ 0.655758] rtc_cmos 00:06: setting system clock to 2012-10-31 11:39:09 UTC (1351683549) [ 0.734310] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100 [ 0.737067] ata2.00: configured for MWDMA2 [ 0.740507] scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.8. PQ: 0 ANSI: 5 [ 0.743836] ata2: drained 28 bytes to clear DRQ [ 0.743841] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 0.745072] ata2.00: BMDMA stat 0x5 [ 0.746296] sr 1:0:0:0: CDB: [ 0.747495] Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00 [ 0.748728] ata2.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in [ 0.748728] res 48/00:02:00:1c:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 0.751056] ata2.00: status: { DRDY DRQ } [ 0.752576] ata2: soft resetting link [ 0.900093] usb 1-2: new full-speed USB device number 2 using uhci_hcd [ 0.908193] ata2.00: configured for MWDMA2 [ 0.909947] ata2: EH complete [ 0.911089] sr0: scsi-1 drive [ 0.912203] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.913431] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.913907] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 0.917115] Freeing unused kernel memory: 1016k freed [ 0.918435] Write protecting the kernel read-only data: 12288k [ 0.927222] Freeing unused kernel memory: 1936k freed [ 0.936163] Freeing unused kernel memory: 1464k freed [ 0.995483] dracut: dracut-018-98.git20120813.fc17 [ 1.044758] udevd[118]: starting version 182 [ 1.065510] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 1.118295] dracut: Starting plymouth daemon [ 1.312103] blkfront: xvda: barrier or flush: disabled [ 1.313300] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632 [ 1.320460] xvda: xvda1 xvda2 [ 1.364359] usb 1-2: New USB device found, idVendor=0627, idProduct=0001 [ 1.364364] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.364367] usb 1-2: Product: QEMU USB Tablet [ 1.364369] usb 1-2: Manufacturer: QEMU 0.8.2 [ 1.364372] usb 1-2: SerialNumber: 1 [ 1.518082] Refined TSC clocksource calibration: 2266.775 MHz. [ 1.518088] Switching to clocksource tsc [ 1.524582] input: QEMU 0.8.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.3/usb1/1-2/1-2:1.0/input/input2 [ 1.524691] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.8.2 QEMU USB Tablet] on usb-0000:00:01.3-2/input0 [ 1.565662] dracut: Scanning devices xvda2 for LVM logical volumes vg_f17x64hvm01/lv_root vg_f17x64hvm01/lv_swap [ 1.576180] dracut: inactive '/dev/vg_f17x64hvm01/lv_swap' [1.97 GiB] inherit [ 1.576412] dracut: inactive '/dev/vg_f17x64hvm01/lv_root' [15.53 GiB] inherit [ 1.726230] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 1.784148] dracut: Checking ext4: /dev/mapper/vg_f17x64hvm01-lv_root [ 1.784351] dracut: issuing e2fsck -a /dev/mapper/vg_f17x64hvm01-lv_root [ 1.801138] dracut: /dev/mapper/vg_f17x64hvm01-lv_root: clean, 28180/1018000 files, 327793/4071424 blocks [ 1.802385] dracut: Remounting /dev/mapper/vg_f17x64hvm01-lv_root with -o ro [ 1.822950] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 1.854460] dracut: Mounted root filesystem /dev/mapper/vg_f17x64hvm01-lv_root [ 1.935263] dracut: Switching root -- Pasi _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |