[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] USB devices in dom0 failing to accept address


In article <1372178958.18901.93.camel@xxxxxxxxxxxxxxxxxxxxxx>,
           Ian Campbell<Ian.Campbell@xxxxxxxxxx> wrote:
> I had a vague feeling this was related to interrupts and then I spotted
> this message in the middle here ;-)
> I'd start by making sure you have the latest firmware for your hardware,
> in order to make sure your BIOS tables are all up to date.

I should probably add that I'm booting with 'acpi=noirq' in the kernel
command line. If I don't do this it locks up mid way through boot.

I'll double check the BIOS on the motherboard, it might well not be the
latest version. However, the USB stuff *does* work just fine if I book to
'vanilla' linux rather than Xen.


Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.