[Xen-users] XCP 1.6 on Intel Modular Server MFSYS25 NIC detect problem.

[Rodrigo Jorge <rlljorge@xxxxxxxxx>]

I trying to install the XCP 1.6 ISO Image in hardware Intel Modular Server MFSYS25v1.

The server has 4 NIC's during installation, but are not detected.

In this same model of server have installed a xenserver 5.6 and the nic's are detected correctly, see below:

[Root @ vms01 ~] # lspci | grep Ethe

05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01)

05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Serdes) (rev 01)

08:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)

08:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06)

[Root @ vms01 ~] #

[Root @ vms01 ~] # cat / etc / modprobe.conf

alias eth0 e1000e

alias eth2 e1000e

alias eth1 e1000e

alias eth3 e1000e

[Root @ vms01 ~] #

[Root @ vms01 ~] # modinfo e1000e

filename: / lib/modules/2.6.32.12-0.7.1.xs5.6.100.327.170613xen/kernel/drivers/net/e1000e/e1000e.ko

version: 1.2.8-NAPI

license: GPL

description: Intel (R) PRO/1000 Network Driver

author: Intel Corporation, <linux.nics@xxxxxxxxx>

[Root @ vms01 ~] # ethtool eth0, ethtool eth1; ethtool eth2; ethtool eth3

Settings for eth0:

        Supported ports: [FIBRE]

        Supported link modes: 1000baseT/Full

        Supports auto-negotiation: Yes

        Advertised link modes: 1000baseT/Full

        Advertised auto-negotiation: Yes

        Speed: 1000Mb / s

        Duplex: Full

        Port: FIBRE

        PHYAD: 0

        Transceiver: external

        Auto-negotiation: on

        Supports Wake-on: pumbag

        Wake-on: g

        Current message level: 0x00000001 (1)

        Link detected: yes

Settings for eth1:

        Supported ports: [FIBRE]

        Supported link modes: 1000baseT/Full

        Supports auto-negotiation: Yes

        Advertised link modes: 1000baseT/Full

        Advertised auto-negotiation: Yes

        Speed: 1000Mb / s

        Duplex: Full

        Port: FIBRE

        PHYAD: 0

        Transceiver: external

        Auto-negotiation: on

        Supports Wake-on: pumbag

        Wake-on: g

        Current message level: 0x00000001 (1)

        Link detected: yes

Settings for eth2:

        Supported ports: [FIBRE]

        Supported link modes: 1000baseT/Full

        Supports auto-negotiation: Yes

        Advertised link modes: 1000baseT/Full

        Advertised auto-negotiation: Yes

        Speed: 1000Mb / s

        Duplex: Full

        Port: FIBRE

        PHYAD: 0

        Transceiver: external

        Auto-negotiation: on

        Supports Wake-on: pumbag

        Wake-on: g

        Current message level: 0x00000001 (1)

        Link detected: yes

Settings for eth3:

        Supported ports: [FIBRE]

        Supported link modes: 1000baseT/Full

        Supports auto-negotiation: Yes

        Advertised link modes: 1000baseT/Full

        Advertised auto-negotiation: Yes

        Speed: 1000Mb / s

        Duplex: Full

        Port: FIBRE

        PHYAD: 0

        Transceiver: external

        Auto-negotiation: on

        Supports Wake-on: d

        Wake-on: d

        Current message level: 0x00000001 (1)

        Link detected: yes

[Root @ vms01 ~] #

Any tips?

Thank you

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users