- installed the xen 4.1 included with 12.10.
- googled the errors, and i see some posts that talk about extracting the bios of the vga card, but only for nvidia video adapters. My adapter is AMD, so then this is not required?
- also some posts about BAR issues, for which i'm a little lost what to do with them.
donald@xen01:/var/log/xen$ cat qemu-dm-mc01.log
domid: 3
-c config qemu network with xen bridge for
vif3.0-emu xenbr0
Using file /dev/vg0/mc01.s in read-write mode
Using file /iso/Windows8EnterpriseV.1.0.iso in read-only mode
Watching /local/domain/0/device-model/3/logdirty/cmd
Watching /local/domain/0/device-model/3/command
Watching /local/domain/3/cpu
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 8aa3304f-c86f-6768-d23f-129e3f15395a
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/8aa3304f-c86f-6768-d23f-129e3f15395a/vncpasswd.
medium change watch on `hdb' (index: 1): /iso/HunterWindows8EnterpriseV.1.0.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
xs_read(/local/domain/3/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/3/log-throttling'
medium change watch on `/local/domain/3/log-throttling' - unknown device, ignored
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 02:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x2:0x0.0x0
pt_register_regions: IO region registered (size=0x00020000 base_addr=0xdfb20004)
pt_register_regions: IO region registered (size=0x00000100 base_addr=0x00002001)
pt_register_regions: Expansion ROM registered (size=0x00020000 base_addr=0xdfb40000)
pt_msi_setup: msi mapped with pirq 37
pci_intx: intx=1
register_real_device: Real physical device 02:00.0 registered successfuly!
IRQ type = MSI-INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 02:00.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x2:0x0.0x1
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xdfb00004)
pt_msi_setup: msi mapped with pirq 36
pci_intx: intx=2
register_real_device: Real physical device 02:00.1 registered successfuly!
IRQ type = MSI-INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 00:1a.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x1a.0x0
pt_register_regions: IO region registered (size=0x00000400 base_addr=0xdfc04000)
pci_intx: intx=1
register_real_device: Real physical device 00:1a.0 registered successfuly!
IRQ type = INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 00:1d.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x1d.0x0
pt_register_regions: IO region registered (size=0x00000400 base_addr=0xdfc03000)
pci_intx: intx=1
register_real_device: Real physical device 00:1d.0 registered successfuly!
IRQ type = INTx
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:05.0][Offset:10h][Length:4]
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:05.0][Offset:10h][Length:4]
cirrus vga map change while on lfb mode
pt_iomem_map: e_phys=f3020000 maddr=dfb20000 type=0 len=131072 index=2 first_map=1
pt_iomem_map: e_phys=f3060000 maddr=dfb00000 type=0 len=16384 index=0 first_map=1
pt_iomem_map: e_phys=f3065000 maddr=dfc04000 type=0 len=4096 index=0 first_map=1
pt_iomem_map: e_phys=f3066000 maddr=dfc03000 type=0 len=4096 index=0 first_map=1
pt_ioport_map: e_phys=c100 pio_base=2000 len=256 index=4 first_map=1
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:05.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:05.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:05.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:05.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:05.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:05.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:05.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:06.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:06.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:06.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:06.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:06.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:06.0][Offset:0eh][Length:4]
pt_pci_read_config: Error: Failed to read register with invalid access size alignment. [00:06.0][Offset:0eh][Length:4]
pt_iomem_map: e_phys=ffffffff maddr=dfb20000 type=0 len=131072 index=2 first_map=0
pt_ioport_map: e_phys=ffff pio_base=2000 len=256 index=4 first_map=0
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:05.0][Offset:10h][Length:4]
pt_iomem_map: e_phys=f3020000 maddr=dfb20000 type=0 len=131072 index=2 first_map=0
pt_ioport_map: e_phys=c100 pio_base=2000 len=256 index=4 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=dfb00000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=f3060000 maddr=dfb00000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=dfc04000 type=0 len=4096 index=0 first_map=0
pt_iomem_map: e_phys=f3065000 maddr=dfc04000 type=0 len=4096 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=dfc03000 type=0 len=4096 index=0 first_map=0
pt_iomem_map: e_phys=f3066000 maddr=dfc03000 type=0 len=4096 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=dfb20000 type=0 len=131072 index=2 first_map=0
pt_ioport_map: e_phys=ffff pio_base=2000 len=256 index=4 first_map=0
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:05.0][Offset:10h][Length:4]
pt_iomem_map: e_phys=f3020000 maddr=dfb20000 type=0 len=131072 index=2 first_map=0
pt_ioport_map: e_phys=c100 pio_base=2000 len=256 index=4 first_map=0
pt_msgctrl_reg_write: guest enabling MSI, disable MSI-INTx translation
pci_intx: intx=1
pt_msi_update: Update msi with pirq 37 gvec a2 gflags 1303
pt_iomem_map: e_phys=ffffffff maddr=dfc04000 type=0 len=4096 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=dfb00000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=f3065000 maddr=dfc04000 type=0 len=4096 index=0 first_map=0
pt_iomem_map: e_phys=f3060000 maddr=dfb00000 type=0 len=16384 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=dfc03000 type=0 len=4096 index=0 first_map=0
pt_iomem_map: e_phys=f3066000 maddr=dfc03000 type=0 len=4096 index=0 first_map=0
2012/10/13 David Sutton
<pere@xxxxxxxxxxxx>
Donald,
I didn't have to install any patches when I got my system up and running, however its a little different from yours;
I'm running an AMD Phenom II x4 965 on an ASUS Sabretooth 990FX r1.0 motherboard. The system has two graphics cards; an NVidia GeForce 550Ti (used by dom0) and an ATI Radeon HD 6770 passed through to a Windows 7 domU. Some things I've noted so far: I've not been able to have the GPLPV drivers installed at the same time as the Catalyst drivers; it would cause issues such as the Catalyst installer to crash or the system to blue-screen on bootup. I had to add on the option 'iommu=soft' when nooting my dom0 (this might not still be needed but isn't hurting anything). I also was having issues with the 12.8 Catalyst drivers; I used the 12.7 instead and had less issues getting them installed.
Regards,
David
----- Original Message -----
From: "Donald van der Wurf" <
d.vander.wurf@xxxxxxxxx>
To: "Ricardo Jesus" <
ricardo.meb.jesus@xxxxxxxxx>
Cc:
xen-users@xxxxxxxxxxxxx
Sent: Saturday, October 13, 2012 5:35:59 AM
Subject: Re: [Xen-users] vga passthrough help needed.
One more question.
I read that for nvidia some patches need to be applied.
So in my understanding for AMD, no patches are needed. It should just work out of the box?
Donald
2012/10/13 Donald van der Wurf <
d.vander.wurf@xxxxxxxxx >
My hardware supports vt-d without a doubt because i am able to passthrough other devices without a problem but still i can't get vga passthrough to work.
Als tried a windows 8 dom-u now.
- built the dom-u without passhtrough first. Windows 8 runs like a charm.
- then i add the pci devices. Windows detects the ATI Mobility Radeon HD 5000 Series and uses the built-in WDDM v1.20 driver, but cannot start the device (Code 10) in device manager.
- i see the passthrough HD Audio device without exclamation mark.
- i see the passthrough usb devices, and can plug in a usb stick and copy files from it.
- then i installed the current catalyst driver package 12.8 for win8, and the vm hangs during installation.
Still i am thinking about if my hardware is the root cause? it's not on the supported list, and i read a lot of things about finding the right hardware combination to get it working. Especcialy on esx (didn't work for me), xenserver (also no success) and now Xen which also doesn't seem to work.
So are there any people out there who use my hardware, and got it working? (motherboard, cpu and gpu?).
2012/10/12 Ricardo Jesus <
ricardo.meb.jesus@xxxxxxxxx >
Hi,
I have a similar GPU PowerColor Go! Green HD5450 1024MB DDR3 PCIEx16
and it sure does support VGA/PCI passthrough on Ubuntu 12.04 LTS and
Windows 8 Preview/Consumer and lspci -vv outputs exactly the same
string.
A quick Google search does identify both CPU and motherboard has
having VT-d support on manufacturer homepages. So in terms of hardware
you're pretty much ok.
However I'm using Debian Wheezy, distro's Xen 4.1.3, kernel 3.2.0 and
3.5-trunk, xm toolstack and pci-stub. However I'm unable to
successfully passthrough using pciback.
Haven't tried Windows 7 though.
Best regards,
Ricardo Jesus.
On Thu, Oct 11, 2012 at 10:26 PM, Donald van der Wurf
<
d.vander.wurf@xxxxxxxxx > wrote:
> Hi Xen community,
>
>
> I've been playing with gpu passthrough for a while now, without success, so
> i'm starting to think that my hardware is the problem.
>
>
>
> My config:
>
> Motherboard: supermicro x9scl+
>
> CPU: Intel® Xeon® Processor E3-1230 V2
>
> Memory: 32GB ECC
>
> GPU: PowerColor Go! Green HD5450 512MB DDR2 PCIEx1.
>
>
>
>
http://wiki.xen.org/wiki/VTd_HowTo
>
> Only devices with FLR capabilities are supported.
>
>
>
> so did the lspci -vv, this gives me the output:
>
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>
>
>
> FLReset not supported by my GPU. Hmm, So? Can i forget about it, and get a
> new gpu? or are there any workarounds availble?
>
>
>
> Also i see that my motherboard + cpu is not on the supported list inhere:
>
http://wiki.xen.org/wiki/VTd_HowTo
>
>
>
> What hardware could i switch to get a working config? New motherboard, and
> keep the cpu + memory? Only new GPU?
>
>
>
> Running on Xen 4.3 unstable on debian squeeze with custom kernel on linux
> 3.6.1. pciback works fine. I can add all pci devices to the vm, install the
> amd drivers without problems, but when starting the windows 7 x64 ultimate
> machine after the install it hangs at Starting Windows.
>
> Any tips would be great.
>
>
> _______________________________________________
> Xen-users mailing list
>
Xen-users@xxxxxxxxxxxxx
>
http://lists.xen.org/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users
