> Thanks stephan,
>
>
> Actually, the kernel for guest OS, I use, is the one recommended in
> the following guide.
>
>
>
https://help.ubuntu.com/community/XenProposed
>
>
> But, I really want to test the one you mentioned in linux-virtual.
> I tried to google linux-virtual and failed to find one.
> Could you tell me the one that you are using?
>
>
> Thanks again,
> - jaeyong
>
>
>
> On Fri, Jul 13, 2012 at 5:01 PM, Stephan Seitz <
s.seitz@xxxxxxxxxxx>
> wrote:
> I assume pygrub does have problems with fancy lvm layouts
> and/or exotic
> filesystems INSIDE domU.
> To avoid potential problems, I've done all of my domU disk
> layouts with a
> separate (first and primary) partition for /boot which is
> always ext3.
>
> Anyway, that has nothing to do with lvm outside domU, pygrub
> is really
> fine with a (dom0's) LV a domU disk .
>
>
> For your mentioned ubuntu domU, it's necessary to use the
> kernel / ramdisk
> provided by linux-virtual. linux-generic is not xen capable.
> you could e.g. install your ubuntu domU fully virtualized
> (hvm) with additional
> linux-virtual and grub-legacy-ec2 packages. As of 12.04 some
> kernel modules
> are placed into linux-image-extra-virtual (None of them are
> necessary for a
> plain installation, but I recently found myself searching for
> "lost" modules).
>
>
>
>
> Am Freitag, den 13.07.2012, 15:01 +0900 schrieb jaeyong yoo:
>
> > Thanks a lot Lan,
> >
> >
> > > The other thing to consider is the use of LVM for the
> > guest /boot. IIRC
> > > this does not work with pygrub.
> >
> >
> > did you mean pygrub is working fine with LVM for the
> > guest /boot?
> >
> >
> > jaeyong
> >
> > On Fri, Jul 13, 2012 at 1:05 AM, Ian Campbell
> > <
ian.campbell@xxxxxxxxxx> wrote:
> > On Thu, 2012-07-12 at 05:36 -0400, jaeyong yoo
> > wrote:
> > >
> > >
> > > 8) while installing, I set the filesystem ext3 in
> > the guest OS.
> > >
> > > 9) everything looks normal. The console say the
> > installation is
> > > completed.
> > >
> > > 10) After installing, I change the xen
> > configuration
> > > file (/etc/xen/ubuntu.cfg) as follows.
> > >
> > > name = "ubuntu" memory = 512 disk =
> > > ['phy:/dev/vgubuntu/ubuntu,xvda,w'] vif = [' ']
> > bootloader = "pygrub"
> >
> >
> > Did ubuntu install a Xen capable kernel and is grub
> > within the guest
> > correctly pointing to it?
> >
> > You can usually use kpartx to expose the partitions
> > of /dev/vgubuntu/ubuntu in dom0 and mount it to poke
> > around.
> >
> > I don't know which kernel flavour you need to have
> > installed in Ubuntu
> > to get Xen support. Perhaps someone else chime in.
> >
> > The other thing to consider is the use of LVM for
> > the guest /boot. IIRC
> > this does not work with pygrub.
> >
> > Ian.
> >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> >
Xen-users@xxxxxxxxxxxxx
> >
http://lists.xen.org/xen-users
>
>
