Re: [Xen-users] Error:bridge-utils are not installing

[Eric <epretorious@xxxxxxxxx>]

Maheen:

If you're more familiar with RHEL/CentOS you could just follow Chapters 7 & 8 of the Virtualization Guide for RHEL5. It's not as detailed as the Xen Beginners Guide but "it just works". (I used the Virtualization Guide last night to create my first instance of Xen on CentOS 5.7 [x86_64] - It was very simple.) You might need to refer to Chapter 2 of the Installation Guide for RHEL5 in order to make the installation tree "accessible using one of the following network protocols: HTTP, FTP or NFS." (Refer to the footnote at the bottom of Step #7 of Chapter 7.2, "Creating guests with virt-manager" for more on this.)

Once you've got it installed, I recommend reading Chapter 25 of the Virtualization Guide to learn the basics of creating/configuring/managing VM's from the CLI (using virsh).

Eric Pretorious

Truckee, CA

---

From: maheen butt <maheen_butt26@xxxxxxxxx>
To: "xen-users@xxxxxxxxxxxxx" <xen-users@xxxxxxxxxxxxx>
Sent: Tuesday, June 19, 2012 4:32 PM
Subject: [Xen-users] Error:bridge-utils are not installing

hi all,

I was following Xen beginners Guid. I downloaded , burnt on cd and installed Debian squeeze

on 64 bit x86 machine. my problem is that i'm stuck at 'setup the linux bridge ' step.

whenever I issue the command " aptitude install bridge-utils", its output told me that there is no

package exist which could be matched with bridge-utils. I've checked its networking. ping is working fine.

As I'm in LAN, I've configured eth0 properly. But can't understand why I'm not able to install bridge-utils?

Thanks

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users