|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] XCP: 4TB local storage
Hello. You can add free ( unpartitioned ) space to local lvm storage using lvm or system-config-lvm ( install it from cent-os repo ). Worked for me:) Sergey Melnik On Mon, May 9, 2011 at 4:25 PM, Denis Cardon <denis.cardon@xxxxxxxxxxxxxxxxxxxxxx> wrote: > Hi Jessy, > >> Thanks for the reply Denis. >> >> I kinda figured that GPT is required. >> >> So how does one install XCP with a GPT partion instead of an MBR >> partition? > > The fdisk message (WARNING: GPT (GUID Partition Table) detected on > '/dev/sda'!) says that you are already using GTP partition. Are you sure you > are actually missing space? Could you check the ouput of vgdisplay and > "parted /dev/sda print all" (parted is not installed by default on XCP, but > you can install it if you enable Centos repositories)? > > cheers, > > Denis > >> >> On Monday, 09 May, 2011 06:16 PM, Denis Cardon wrote: >>> >>> Hi Jessy, >>> >>>> 4TB storage in RAID10 >>>> >>>> We installed XCP 1.0 and it was successful except that XCP only sees 2TB >>>> of storage. >>>> Output of df -h: >>>> ---------------------------------------------------------------------- >>>> Filesystem Size Used Avail Use% Mounted on >>>> /dev/sda1 4.0G 1.5G 2.3G 39% / >>>> none 380M 0 380M 0% /dev/shm >>>> ---------------------------------------------------------------------- >>> >>> the df output just tells you the size of the dom0 system partition. >>> The VM are stored on a lvm partition and you should use vgdisplay to >>> see what you have there. >>> >>>> Output of fdisk -l: >>>> >>>> ----------------------------------------------------------------------------------------------------------------------------------------------------- >>>> >>>> >>>> WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util >>>> fdisk doesn't support GPT. Use GNU Parted. >>> >>> fdisk cannot deal with GPT partition table (see warning above), and >>> GPT is required for partition above 2GB. You should actually use >>> gparted to look at such a partition table. >>> >>> Cheers, >>> >>> Denis >>> >>> >>> >>> >>>> >>>> >>>> WARNING: The size of this disk is 4.0 TB (3997997989888 bytes). >>>> DOS partition table format can not be used on drives for volumes >>>> larger than 2.2 TB (2199023255040 bytes). Use parted(1) and GUID >>>> partition table format (GPT). >>>> >>>> >>>> Disk /dev/sda: 3997.9 GB, 3997997989888 bytes >>>> 255 heads, 63 sectors/track, 486062 cylinders >>>> Units = cylinders of 16065 * 512 = 8225280 bytes >>>> >>>> Device Boot Start End Blocks Id System >>>> /dev/sda1 * 1 523 4194304 83 Linux >>>> Partition 1 does not end on cylinder boundary. >>>> /dev/sda2 523 1045 4194304 83 Linux >>>> /dev/sda3 1045 267218 2138039945+ 8e Linux LVM >>>> >>>> ----------------------------------------------------------------------------------------------------------------------------------------------------- >>>> >>>> >>>> >>>> Any idea on how this can be resolved? Thanks in advance. >>>> >>> >>> >> >> > > > -- > Denis Cardon > Tranquil IT Systems > 44 bvd des pas enchantÃs > 44230 Saint SÃbastien sur Loire > tel : +33 (0) 2.40.97.57.57 > http://www.tranquil-it-systems.fr > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users > _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |