Re: [Xen-users] XCP: 4TB local storage

[Denis Cardon <denis.cardon@xxxxxxxxxxxxxxxxxxxxxx>]

Hi Jessy,

> 4TB storage in RAID10
>
> We installed XCP 1.0 and it was successful except that XCP only sees 2TB
> of storage.
> Output of df -h:
> ----------------------------------------------------------------------
> Filesystem Size Used Avail Use% Mounted on
> /dev/sda1 4.0G 1.5G 2.3G 39% /
> none 380M 0 380M 0% /dev/shm
> ----------------------------------------------------------------------
the df output just tells you the size of the dom0 system partition. The 
VM are stored on a lvm partition and you should use vgdisplay to see 
what you have there.
> Output of fdisk -l:
> -----------------------------------------------------------------------------------------------------------------------------------------------------
>
> WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util
> fdisk doesn't support GPT. Use GNU Parted.
fdisk cannot deal with GPT partition table (see warning above), and GPT 
is required for partition above 2GB. You should actually use gparted to 
look at such a partition table.
Cheers,

Denis




> WARNING: The size of this disk is 4.0 TB (3997997989888 bytes).
> DOS partition table format can not be used on drives for volumes
> larger than 2.2 TB (2199023255040 bytes). Use parted(1) and GUID
> partition table format (GPT).
>
>
> Disk /dev/sda: 3997.9 GB, 3997997989888 bytes
> 255 heads, 63 sectors/track, 486062 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Device Boot Start End Blocks Id System
> /dev/sda1 * 1 523 4194304 83 Linux
> Partition 1 does not end on cylinder boundary.
> /dev/sda2 523 1045 4194304 83 Linux
> /dev/sda3 1045 267218 2138039945+ 8e Linux LVM
> -----------------------------------------------------------------------------------------------------------------------------------------------------
>
>
> Any idea on how this can be resolved? Thanks in advance.

--
Denis Cardon
Tranquil IT Systems
44 bvd des pas enchantés
44230 Saint Sébastien sur Loire
tel : +33 (0) 2.40.97.57.57
http://www.tranquil-it-systems.fr


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users