|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] xen Installation through YUM
On Mon, Mar 01, 2010 at 04:52:57PM -0800, kishore kumar wrote: > Hi All, > > To follow up this, after Installing Xen Hypervisor 3.4.2 successfully, I > downloaded Linux 2.6.18 with Xen 3.4.x support source tarball, updated for > Xen 3.4.2 from [1]xen.org website and compiled and installed. > > Later I changed my grub.conf file to boot from Xen. > > ####################### > root (hd0,0) > kernel /xen-3.4.2.gz > module /vmlinuz-2.6.18 ro root=dev/mapper/VolGroup-lv_root > LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us > rhgb quiet > module /initrd-2.6.18.8.img > ####################### > > After I reboot, I get the following messages. > > ################ > > Xenopf Intel processor model 44 or P6 family is not supported. > Initialization failed. > > LOADING DOMAIN 0 > Cannot load bzImage v2.04. v2.08 is required. > > Panic on CPU 0 > Could not set up DOM 0 Guest OS > Reboot in 5 sec > > ############### > What is wrong happening here? > I guess with linux-2.6.18-xen you should be using just the zImage, not bzImage? -- Pasi > THanks > BK > On Mon, Mar 1, 2010 at 12:14 PM, kishore kumar <[2]bodkekumar@xxxxxxxxx> > wrote: > > Hi Boris, > > I was following your steps and got stuck in the middle. Here is what I > did... > > Step 1 was sucessfull and Xen Hypervisor 3.4.2 is installed > successfully. > > Now while doing the step 2 > > STEP 2: > > Install Libvirt > # yum install libvirt libvirt-python python-virtinst \ > virt-manager virt-viewer (THIS WENT THROUGH SUCCESSFULLY) > > PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge > Git Repository to support Xen 3.4.2 Dom0. > # git clone > git://[3]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > linux-2.6-xen (THIS WENT THROUGH SUCCESSFULLY) > # cd linux-2.6-xen > # make menuconfig ( setup Xen Dom0 support) (HOW TO SET UP THIS ?) > # make -j(x)(number_of_kernels) (I DID MAKE -J, WHAT SHOULD I GIVE HERE > IN PLACE OF x. ?? > > BUT GAVE ME ERRORS. I DONT KNOW WHAT WRONG I AM DOING HERE. CAN YOU > PLEASE HELP ME OUT IN THIS?) > > I HAVE ATTACHED THE LOG FILE FOR YOUR REFERENCE. I AM USING FEDORA 12 > MACHINE. > > Thanks > BK > > On Sat, Feb 27, 2010 at 4:27 AM, Boris Derzhavets > <[4]bderzhavets@xxxxxxxxx> wrote: > > Nothing went wrong. > Now build pvops kernel. > Instructions bellow. > Reading PVOPS WIKI would help as well > > Boris. > > --- On Fri, 2/26/10, kishore kumar <[5]bodkekumar@xxxxxxxxx> wrote: > > From: kishore kumar <[6]bodkekumar@xxxxxxxxx> > Subject: Re: [Xen-users] xen Installation through YUM > To: "Pasi Kärkkäinen" <[7]pasik@xxxxxx> > Cc: "Boris Derzhavets" <[8]bderzhavets@xxxxxxxxx>, > [9]xen-users@xxxxxxxxxxxxxxxxxxx > Date: Friday, February 26, 2010, 9:41 PM > > Now I am able to do yum install kernel-xen xen. > > I can see the xen Images sitting in /boot directory. Its xen-3.4.2.gz and > xen.gz. > > Is this what to be expected ? > > I changed the grub.conf file to boot with Xen as below > > title Fedora (2.6.31.9-174.fc12.x86_64) > root(hd0,0) > kernel /xen-3.4.2.gz > > My question is I dont see vmlinuz-2.6-xen0 in /boot directory. > > Do I need to add this line module /boot/vmlinuz-2.6-xen0 ??? But I dont > see this > file .When we do yum to insall xen, will it also install vmlinuz-2.6-xen0 > also ?? > > Any idea what went wrong here?? > > thanks > BK > > > On Fri, Feb 26, 2010 at 2:28 PM, Pasi Kärkkäinen <[10]pasik@xxxxxx> wrote: > > On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar wrote: > > I have already set gpgcheck=0 in /etc/yum.conf file. > > > > I did not clearly understood on what you said in the next > line......... > > > > to install unsigned rpms supposed to be built latter. > > Activate rpmbuild on F12:- > > > > # yum install transfig texi2html libaio-devel dev86 \ > > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd > > what should I do can you please clarify me on the above statements > you > > said??? > > > > I followed your next step and downloaded xen-3.4.2-2.fc13.src.rpm > from > > internet and started doing the steps mentioned by you. but at the > very > > step I get the messages saying > > > > After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > warning: user mockbuild does not exist - using root > > warning: group mockbuild does not exist - using root > > > > Any idea what went wrong again?? > > > > Nothing went wrong, those are just warnings. > > -- Pasi > > THanks > > bk > > > > On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets > > <[1][11]bderzhavets@xxxxxxxxx> wrote: > > > > Set in /etc/yum.conf set gpgcheck=0 ( temporarily ) > > to install unsigned rpms supposed to be built latter. > > Activate rpmbuild on F12:- > > > > # yum install transfig texi2html libaio-devel dev86 \ > > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd > > > > 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm. Download from Net > > xen-3.4.2-2.fc13.src.rpm. Now :- > > > > # rpm -iv xen-3.4.2-2.fc13.src.rpm > > # cd > > # cd rpmbuild/SPEC > > # rpmbuild -bb ./xen.spec > > # cd ../RPMS/x86_64 > > yum install xen-3.4.2-2.fc12.x86_64.rpm \ > > xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \ > > xen-devel-3.4.2-2.fc12.x86_64.rpm \ > > xen-doc-3.4.2-2.fc12.x86_64.rpm \ > > xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \ > > xen-libs-3.4.-2.fc12.x86_64.rpm \ > > xen-runtime-3.4.2-2.fc12.x86_64.rpm > > > > Xen Hypervisor 3.4.2 installed > > > > 2. Install Libvirt > > > > # yum install libvirt libvirt-python python-virtinst \ > > virt-manager virt-viewer > > > > PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge > > Git Repository to support Xen 3.4.2 Dom0. > > > > # git clone > git://[2][12]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > linux-2.6-xen > > # cd linux-2.6-xen > > # make menuconfig ( setup Xen Dom0 support) > > # make -j(x)(number_of_kernels) > > # make modules_install install > > > > You may also want to build 2.6.32.9 pvops > > > > # git checkout origin/xen/stable -b xen/stable > > > > I just switched from xen/master ( default 2.6.31.6 ) to xen/stable (the > most > > recent supposed to become LTS - 2.6.32.9) > > > > Boris. > > > > --- On Fri, 2/26/10, Pasi Kärkkäinen <[3][13]pasik@xxxxxx> wrote: > > > > From: Pasi Kärkkäinen <[4][14]pasik@xxxxxx> > > Subject: Re: [Xen-users] xen Installation through YUM > > To: "kishore kumar" <[5][15]bodkekumar@xxxxxxxxx> > > Cc: [6][16]xen-users@xxxxxxxxxxxxxxxxxxx > > Date: Friday, February 26, 2010, 4:50 AM > > > > On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar wrote: > > > HI, > > > > > > I am trying to install xen through yum. Here is what I did. > > > > > > > > > [root@localhost Kishore]# yum install kernel-xen xen > > > > > > Setting up Install Process > > > > > > Resolving Dependencies > > > > > > --> Running transaction check > > > > > > ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set to be > installed > > > > > > --> Processing Dependency: kernel-firmware >= 2.6.31.9-174.fc12 > for > > > package: kernel-2.6.31.9-174.fc12.x86_64 > > > > > > ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be updated > > > > > > --> Processing Dependency: xen-runtime = 3.4.2-1.fc12 for > package: > > > xen-3.4.2-1.fc12.x86_64 > > > > > > --> Processing Dependency: PyXML for package: > xen-3.4.2-1.fc12.x86_64 > > > > > > --> Running transaction check > > > > > > ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to be updated > > > > > > ---> Package kernel-firmware.noarch 0:2.6.31.9-174.fc12 set to be > updated > > > > > > ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set to be updated > > > > > > --> Processing Dependency: xen-libs = 3.4.2-1.fc12 for package: > > > xen-runtime-3.4.2-1.fc12.x86_64 > > > > > > --> Processing Dependency: xen-hypervisor-abi = 3.4 for package: > > > xen-runtime-3.4.2-1.fc12.x86_64 > > > > > > --> Running transaction check > > > > > > ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12 set to be > updated > > > > > > ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to be updated > > > > > > --> Finished Dependency Resolution > > > > > > Dependencies Resolved > > > > > > > > > > ================================================================================ > > > > > > Package Arch Version Repository Size > > > > > > > > > > ================================================================================ > > > > > > Installing: > > > > > > kernel x86_64 2.6.31.9-174.fc12 updates-released 20 M > > > > > > xen x86_64 3.4.2-1.fc12 updates-released 898 k > > > > > > Installing for dependencies: > > > > > > PyXML x86_64 0.8.4-17.fc12 updates-released 906 k > > > > > > xen-hypervisor x86_64 3.4.2-1.fc12 updates-released 2.9 M > > > > > > xen-runtime x86_64 3.4.2-1.fc12 updates-released 4.0 M > > > > > > Updating for dependencies: > > > > > > kernel-firmware noarch 2.6.31.9-174.fc12 updates-released 906 k > > > > > > xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k > > > > > > Transaction Summary > > > > > > > > > > ================================================================================ > > > > > > Install 5 Package(s) > > > > > > Upgrade 2 Package(s) > > > > > > Total download size: 29 M > > > > > > Is this ok [y/N]: y > > > > > > Downloading Packages: > > > > > > (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB 00:00 > > > > > > (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB 00:02 > > > > > > (3/7): kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906 kB > 00:00 > > > > > > (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00 > > > > > > (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm | 2.9 MB 00:00 > > > > > > (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB 00:00 > > > > > > (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0 MB 00:00 > > > > > > > > > > -------------------------------------------------------------------------------- > > > > > > Total 6.7 MB/s | 29 MB 00:04 > > > > > > warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: > NOKEY, key > ID > > > 57bbccba > > > > > > Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm is not installed > > > > > > > > > > > > Did Xen got installed with this? > > > > > > Will the grub.conf be automatically updtaed after I run this > command. > > > (But I dont see my grub.conf being updated) > > > > > > Any Idea what went wrong here. > > > > > > > Fedora 12 doesn't include Xen dom0 capable kernel, see: > > [7][17]http://fedoraproject.org/wiki/Features/XenPvopsDom0 > > > > You need to get one of the 'testing' rpms, or compile it yourself. > > > > -- Pasi > > > > _______________________________________________ > > Xen-users mailing list > > [8][18]Xen-users@xxxxxxxxxxxxxxxxxxx > > [9][19]http://lists.xensource.com/xen-users > > > > References > > > > Visible links > > 1. mailto:[20]bderzhavets@xxxxxxxxx > > 2. [21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 3. mailto:[22]pasik@xxxxxx > > 4. mailto:[23]pasik@xxxxxx > > 5. mailto:[24]bodkekumar@xxxxxxxxx > > 6. mailto:[25]xen-users@xxxxxxxxxxxxxxxxxxx > > 7. [26]http://fedoraproject.org/wiki/Features/XenPvopsDom0 > > 8. [27]http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx > > 9. [28]http://lists.xensource.com/xen-users > > -----Inline Attachment Follows----- > > _______________________________________________ > Xen-users mailing list > [29]Xen-users@xxxxxxxxxxxxxxxxxxx > [30]http://lists.xensource.com/xen-users > > References > > Visible links > 1. http://xen.org/ > 2. mailto:bodkekumar@xxxxxxxxx > 3. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 4. mailto:bderzhavets@xxxxxxxxx > 5. mailto:bodkekumar@xxxxxxxxx > 6. mailto:bodkekumar@xxxxxxxxx > 7. mailto:pasik@xxxxxx > 8. mailto:bderzhavets@xxxxxxxxx > 9. mailto:xen-users@xxxxxxxxxxxxxxxxxxx > 10. http://mc/compose?to=pasik@xxxxxx > 11. http://mc/compose?to=bderzhavets@xxxxxxxxx > 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 13. http://mc/compose?to=pasik@xxxxxx > 14. http://mc/compose?to=pasik@xxxxxx > 15. http://mc/compose?to=bodkekumar@xxxxxxxxx > 16. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx > 17. http://fedoraproject.org/wiki/Features/XenPvopsDom0 > 18. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx > 19. http://lists.xensource.com/xen-users > 20. http://mc/compose?to=bderzhavets@xxxxxxxxx > 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 22. http://mc/compose?to=pasik@xxxxxx > 23. http://mc/compose?to=pasik@xxxxxx > 24. http://mc/compose?to=bodkekumar@xxxxxxxxx > 25. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx > 26. http://fedoraproject.org/wiki/Features/XenPvopsDom0 > 27. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx > 28. http://lists.xensource.com/xen-users > 29. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx > 30. http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |