Xen project Mailing List

On Sat, Feb 27, 2010 at 4:27 AM, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:

Nothing went wrong.
Now build pvops kernel.
Instructions bellow.
Reading PVOPS WIKI would help as well

Boris.

--- On Fri, 2/26/10, kishore kumar <bodkekumar@xxxxxxxxx> wrote:

From: kishore kumar <bodkekumar@xxxxxxxxx>

Subject: Re: [Xen-users] xen Installation through YUM
To: "Pasi Kärkkäinen" <pasik@xxxxxx>
Cc: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
Date: Friday, February 26, 2010, 9:41 PM

Now I am able to do yum install kernel-xen xen.

I can see the xen Images sitting in /boot directory. Its xen-3.4.2.gz and xen.gz.

Is this what to be expected ?

I changed the grub.conf file to boot with Xen as below

title Fedora (2.6.31.9-174.fc12.x86_64)

       root(hd0,0)

       kernel /xen-3.4.2.gz



My question is I dont see vmlinuz-2.6-xen0 in /boot directory.

Do I need to add this line module /boot/vmlinuz-2.6-xen0 ??? But I dont see this file .When we do yum to insall xen, will it also install vmlinuz-2.6-xen0 also ??

Any idea what went wrong here??

thanks

BK

On Fri, Feb 26, 2010 at 2:28 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:

On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar wrote:
> I have already set gpgcheck=0 in /etc/yum.conf file.
>
> I did not clearly understood on what you said in the next line.........
>
> to install unsigned rpms supposed to be built latter.
> Activate rpmbuild on F12:-
>
> # yum install transfig texi2html libaio-devel dev86 \
> glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
> what should I do can you please clarify me on the above statements you
> said???
>
> I followed your next step and downloaded xen-3.4.2-2.fc13.src.rpm from
> internet and started doing the steps mentioned by you. but at the very
> step I get the messages saying
>
> After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
> warning: user mockbuild does not exist - using root
> warning: group mockbuild does not exist - using root
>
> Any idea what went wrong again??
>

Nothing went wrong, those are just warnings.

-- Pasi

> THanks
> bk
>
> On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets

> <[1]bderzhavets@xxxxxxxxx> wrote:
>
> Set in /etc/yum.conf set gpgcheck=0 ( temporarily )
> to install unsigned rpms supposed to be built latter.
> Activate rpmbuild on F12:-
>
> # yum install transfig texi2html libaio-devel dev86 \
> glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
>
> 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm. Download from Net
> xen-3.4.2-2.fc13.src.rpm. Now :-
>
> # rpm -iv xen-3.4.2-2.fc13.src.rpm
> # cd
> # cd rpmbuild/SPEC
> # rpmbuild -bb ./xen.spec
> # cd ../RPMS/x86_64
> yum install xen-3.4.2-2.fc12.x86_64.rpm \
> xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \
> xen-devel-3.4.2-2.fc12.x86_64.rpm \
> xen-doc-3.4.2-2.fc12.x86_64.rpm \
> xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \
> xen-libs-3.4.-2.fc12.x86_64.rpm \
> xen-runtime-3.4.2-2.fc12.x86_64.rpm
>
> Xen Hypervisor 3.4.2 installed
>
> 2. Install Libvirt
>
> # yum install libvirt libvirt-python python-virtinst \
> virt-manager virt-viewer
>
> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> Git Repository to support Xen 3.4.2 Dom0.
>
> # git clone git://[2]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git

> linux-2.6-xen
> # cd linux-2.6-xen
> # make menuconfig ( setup Xen Dom0 support)
> # make -j(x)(number_of_kernels)
> # make modules_install install
>
> You may also want to build 2.6.32.9 pvops
>
> # git checkout origin/xen/stable -b xen/stable
>
> I just switched from xen/master ( default 2.6.31.6 ) to xen/stable (the most
> recent supposed to become LTS - 2.6.32.9)
>
> Boris.
>
> --- On Fri, 2/26/10, Pasi Kärkkäinen <[3]pasik@xxxxxx> wrote:
>
> From: Pasi Kärkkäinen <[4]pasik@xxxxxx>

> Subject: Re: [Xen-users] xen Installation through YUM
> To: "kishore kumar" <[5]bodkekumar@xxxxxxxxx>
> Cc: [6]xen-users@xxxxxxxxxxxxxxxxxxx

> Date: Friday, February 26, 2010, 4:50 AM
>
> On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar wrote:
> > HI,
> >
> > I am trying to install xen through yum. Here is what I did.
> >
> >
> > [root@localhost Kishore]# yum install kernel-xen xen
> >
> > Setting up Install Process
> >
> > Resolving Dependencies
> >
> > --> Running transaction check
> >
> > ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set to be installed
> >
> > --> Processing Dependency: kernel-firmware >= 2.6.31.9-174.fc12 for
> > package: kernel-2.6.31.9-174.fc12.x86_64
> >
> > ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be updated
> >
> > --> Processing Dependency: xen-runtime = 3.4.2-1.fc12 for package:
> > xen-3.4.2-1.fc12.x86_64
> >
> > --> Processing Dependency: PyXML for package: xen-3.4.2-1.fc12.x86_64
> >
> > --> Running transaction check
> >
> > ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to be updated
> >
> > ---> Package kernel-firmware.noarch 0:2.6.31.9-174.fc12 set to be updated
> >
> > ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set to be updated
> >
> > --> Processing Dependency: xen-libs = 3.4.2-1.fc12 for package:
> > xen-runtime-3.4.2-1.fc12.x86_64
> >
> > --> Processing Dependency: xen-hypervisor-abi = 3.4 for package:
> > xen-runtime-3.4.2-1.fc12.x86_64
> >
> > --> Running transaction check
> >
> > ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12 set to be updated
> >
> > ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to be updated
> >
> > --> Finished Dependency Resolution
> >
> > Dependencies Resolved
> >
> >
> ================================================================================
> >
> > Package Arch Version Repository Size
> >
> >
> ================================================================================
> >
> > Installing:
> >
> > kernel x86_64 2.6.31.9-174.fc12 updates-released 20 M
> >
> > xen x86_64 3.4.2-1.fc12 updates-released 898 k
> >
> > Installing for dependencies:
> >
> > PyXML x86_64 0.8.4-17.fc12 updates-released 906 k
> >
> > xen-hypervisor x86_64 3.4.2-1.fc12 updates-released 2.9 M
> >
> > xen-runtime x86_64 3.4.2-1.fc12 updates-released 4.0 M
> >
> > Updating for dependencies:
> >
> > kernel-firmware noarch 2.6.31.9-174.fc12 updates-released 906 k
> >
> > xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k
> >
> > Transaction Summary
> >
> >
> ================================================================================
> >
> > Install 5 Package(s)
> >
> > Upgrade 2 Package(s)
> >
> > Total download size: 29 M
> >
> > Is this ok [y/N]: y
> >
> > Downloading Packages:
> >
> > (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB 00:00
> >
> > (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB 00:02
> >
> > (3/7): kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906 kB 00:00
> >
> > (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00
> >
> > (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm | 2.9 MB 00:00
> >
> > (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB 00:00
> >
> > (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0 MB 00:00
> >
> >
> --------------------------------------------------------------------------------
> >
> > Total 6.7 MB/s | 29 MB 00:04
> >
> > warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: NOKEY, key ID
> > 57bbccba
> >
> > Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm is not installed
> >
> >
> >
> > Did Xen got installed with this?
> >
> > Will the grub.conf be automatically updtaed after I run this command.
> > (But I dont see my grub.conf being updated)
> >
> > Any Idea what went wrong here.
> >
>
> Fedora 12 doesn't include Xen dom0 capable kernel, see:
> [7]http://fedoraproject.org/wiki/Features/XenPvopsDom0

>
> You need to get one of the 'testing' rpms, or compile it yourself.
>
> -- Pasi
>
> _______________________________________________
> Xen-users mailing list

> [8]Xen-users@xxxxxxxxxxxxxxxxxxx
> [9]http://lists.xensource.com/xen-users
>
> References
>
> Visible links
> 1. mailto:bderzhavets@xxxxxxxxx
> 2. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> 3. mailto:pasik@xxxxxx
> 4. mailto:pasik@xxxxxx
> 5. mailto:bodkekumar@xxxxxxxxx
> 6. mailto:xen-users@xxxxxxxxxxxxxxxxxxx
> 7. http://fedoraproject.org/wiki/Features/XenPvopsDom0
> 8. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> 9. http://lists.xensource.com/xen-users

-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list

Xen-users@xxxxxxxxxxxxxxxxxxx

http://lists.xensource.com/xen-users