|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Error: Device 0 (vif) could not beconnected.Hotplugscripts not working
On Wed, Feb 24, 2010 at 11:11:26PM -0000, Ian Tobin wrote: > Think i found it > > Device drivers -à <*> Xen backend network device > I have compiled the kernel with that option and now it works at last! > > Thanks for the help guys > > Yeah.. netback is definitely a requirement for the vifs to work :) I didn't even suspect you might be missing that.. oh well. -- Pasi > > Ian > > > > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Boris > Derzhavets > Sent: 24 February 2010 17:13 > To: Mike Viau > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > Subject: RE: [Xen-users] Error: Device 0 (vif) could not > beconnected.Hotplugscripts not working > > > > Hard link <*> Network Bridging and XEN-> Backend Drivers in Dom0 <*> > It fixes your config. That's all. > > B. > > --- On Wed, 2/24/10, Mike Viau <viaum@xxxxxxxxxxxxxxx> wrote: > > From: Mike Viau <viaum@xxxxxxxxxxxxxxx> > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be > connected.Hotplugscripts not working > To: bderzhavets@xxxxxxxxx > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > Date: Wednesday, February 24, 2010, 10:08 AM > > Non-working .config attached. > > I have been doing my best to try and read up on the options that were > setup differently in the working .config you sent me. > > Do you know if JF setup some sort of wiki for configuring a xenified > kernel? > > Thanks. > > > -M > > -------------------------------------------------------------------------- > > Date: Wed, 24 Feb 2010 06:59:23 -0800 > From: bderzhavets@xxxxxxxxx > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be > connected.Hotplugscripts not working > To: mike.viau@xxxxxxxxxxxxxxx > CC: xen-users@xxxxxxxxxxxxxxxxxxx > > Hi Mike, > Submit your .config , please . I would suspect you just missed bridged > networking > linking . I always tune manually configs for xenified and pvops kernels > for about > 1.5 years. Several times i asked for JF's support, but there were not > network hotplug > issues > > Boris. > > --- On Tue, 2/23/10, Mike Viau <viaum@xxxxxxxxxxxxxxx> wrote: > > From: Mike Viau <viaum@xxxxxxxxxxxxxxx> > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be > connected.Hotplugscripts not working > To: itobin@xxxxxxxxxxxxx > Cc: bderzhavets@xxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx, pasik@xxxxxx > Date: Tuesday, February 23, 2010, 6:17 PM > > I am using udev 0.125-7+lenny3 with a xenified 2.6.31.12 kernel. I was > getting "Error: Device 0 (vif) could not be connected.Hotplugscripts not > working" initially, but by using the .config provided thankfully by Boris > (bderzhavets@xxxxxxxxx) with the exact same setup, the error went away. > > I see you are using the PV OPS kernel though...... > > -M > > > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be > connected.Hotplugscripts not working > > Date: Tue, 23 Feb 2010 22:59:29 +0000 > > From: itobin@xxxxxxxxxxxxx > > To: itobin@xxxxxxxxxxxxx; pasik@xxxxxx > > CC: bderzhavets@xxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx > > > > Ignore that, it was a slight error in the disk line. > > > > Im lost with this, its very odd. > > > > -----Original Message----- > > From: Ian Tobin > > Sent: 23 February 2010 22:48 > > To: Ian Tobin; Pasi Kärkkäinen > > Cc: Boris Derzhavets; xen-users@xxxxxxxxxxxxxxxxxxx > > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be > connected.Hotplugscripts not working > > > > Going back through the log, only thing i found was this > > > > raise XendError("Unknown device type: %s" % name) > > XendError: Unknown device type: None > > > > Not sure if that is the cause > > > > > > -----Original Message----- > > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Ian Tobin > > Sent: 23 February 2010 22:38 > > To: Pasi Kärkkäinen > > Cc: Boris Derzhavets; xen-users@xxxxxxxxxxxxxxxxxxx > > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be > connected.Hotplugscripts not working > > > > Well i have upgraded to squeeze which has installed udev (151-2) > > > > This still hasn't has any affect :( > > > > Also grub2 got installed and it messed up everything, i managed to get > it back to grub-legacy but thats going to caused more headaches for > people. > > > > Any other ideas? > > > > thanks > > > > > > > > -----Original Message----- > > From: Pasi Kärkkäinen [mailto:pasik@xxxxxx] > > Sent: 23 February 2010 20:11 > > To: Ian Tobin > > Cc: Boris Derzhavets; xen-users@xxxxxxxxxxxxxxxxxxx > > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be > connected.Hotplug scripts not working > > > > On Tue, Feb 23, 2010 at 08:06:50PM -0000, Ian Tobin wrote: > > > Confirmed, > > > > > > > > > > > > Exact same issue on 32bit. I don't think you can use lenny without > udev > > > being installed?? > > > > > > > So maybe you need a newer udev version then? > > > > -- Pasi > > > > > > > > > > > > > > > > > From: Boris Derzhavets [mailto:bderzhavets@xxxxxxxxx] > > > Sent: 23 February 2010 19:34 > > > To: Ian Tobin; Pasi Kärkkäinen > > > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > > > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be connected. > > > Hotplug scripts not working > > > > > > > > > > > > I would guess udev is installed, but 2.6.31.X kernel is to high for > this > > > udev. > > > It doesn't happen on Jaunty&Karmic Servers (9.04, 9.10) > > > > > > Boris. > > > P.S. Just a guess. > > > > > > --- On Tue, 2/23/10, Pasi Kärkkäinen <pasik@xxxxxx> wrote: > > > > > > From: Pasi Kärkkäinen <pasik@xxxxxx> > > > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be connected. > > > Hotplug scripts not working > > > To: "Ian Tobin" <itobin@xxxxxxxxxxxxx> > > > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > > > Date: Tuesday, February 23, 2010, 2:24 PM > > > > > > On Tue, Feb 23, 2010 at 01:30:12PM -0000, Ian Tobin wrote: > > > > Hello, > > > > > > > > Can anyone help? > > > > > > > > I have again installed a fresh OS Debian Lenny 64bit and done the > > > > following > > > > > > > > Xen: > > > > downloaded xen-3.4.2.tar.gz and extract it > > > > cd xen-3.4.2 > > > > make xen > > > > make tools > > > > make stubdom > > > > > > > > cd dist/install/ > > > > cp -R * / > > > > > > > > downloaded Jeremys kernel > > > > > > > > make menuconfig > > > > make bzImage > > > > make modules > > > > make modules_install > > > > add to /etc/fstab none /proc/xen xenfs defaults 0 0 > > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.31.6 > > > > cp -a System.map /boot/System.map-2.6.31.6 > > > > cp -a .config /boot/config-2.6.31.6 > > > > depmod -a > > > > update-initramfs -c -k 2.6.31.6 > > > > > > > > added grub line and rebooted. XEN starts but DomU just keeps coming > up > > > > about hotplug scripts not working. > > > > > > > > Anyone? > > > > > > > > > > Does "xm log" have more details about the error? Do you have udev > > > installed in dom0? > > > > > > What's your udev version? > > > > > > -- Pasi > > > > > > > Thanks > > > > > > > > Ian > > > > > > > > > > > > -----Original Message----- > > > > From: Tej [mailto:[1]bewith.tej@xxxxxxxxx] > > > > Sent: 20 February 2010 12:04 > > > > To: Ian Tobin > > > > Cc: [2]xen-users@xxxxxxxxxxxxxxxxxxx > > > > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be > connected. > > > > Hotplug scripts not working > > > > > > > > On Sat, Feb 20, 2010 at 5:25 AM, Ian Tobin <[3]itobin@xxxxxxxxxxxxx> > > > wrote: > > > > > Hi guys, > > > > > > > > > > > > > > > > > > > > Familiar issue. > > > > > > > > > > > > > > > > > > > > Running pv_ops kernel 2.6.31.6 64 bit on Debian Lenny > > > > > > > > > > > > > > > > > > > > Everytime i build the server i get the same issue. The build goes > well > > > > but > > > > > as soon as i try and start a DomU i get this problem. > > > > > > > > > > > > > > > > > > > > Have checked the bridge everytime which exists, checked vif config > > > > which is > > > > > fine and also have tried live configs from another server to no > > > > effect. > > > > > > > > > > > > > > > > > > > > Logs show nothing. > > > > > > > > > > > > > > > > > > > > Interesting i have found if i have 2 ssh windows open i can issue > xm > > > > create > > > > > domu in one window and while it hangs jump to the other and issue > xm > > > > unpause > > > > > domu and then jump back to the other and issue ctrl+c the and the > domU > > > > will > > > > > start with networking! > > > > > > > > > > > > > > > > > > > > Im really puzzled but it sounds to me like a bug in one of the xen > > > > scripts. > > > > > > > > > > > > > > > > > > > > Anyone else had this issue? > > > > > > > > I had this issue couple of time.... But I go for some quick fix for > it. > > > > what your udev directory says: > > > > > > > > # ls -l /etc/udev/rules.d > > > > > > > > If not hotplug scripts exist, copy it from tools (could be some > > > > dependency issue e.g uuid not installed ) > > > > > > > > > > > > > > > > > > > > > > > > Ian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Xen-users mailing list > > > > > [4]Xen-users@xxxxxxxxxxxxxxxxxxx > > > > > [5]http://lists.xensource.com/xen-users > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Xen-users mailing list > > > > [6]Xen-users@xxxxxxxxxxxxxxxxxxx > > > > [7]http://lists.xensource.com/xen-users > > > > > > _______________________________________________ > > > Xen-users mailing list > > > [8]Xen-users@xxxxxxxxxxxxxxxxxxx > > > [9]http://lists.xensource.com/xen-users > > > > > > > > > > > > References > > > > > > Visible links > > > 1. file:///mc/compose?to=bewith.tej@xxxxxxxxx > > > 2. file:///mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx > > > 3. file:///mc/compose?to=itobin@xxxxxxxxxxxxx > > > 4. file:///mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx > > > 5. http://lists.xensource.com/xen-users > > > 6. file:///mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx > > > 7. http://lists.xensource.com/xen-users > > > 8. file:///mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx > > > 9. http://lists.xensource.com/xen-users > > > > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@xxxxxxxxxxxxxxxxxxx > > http://lists.xensource.com/xen-users > > > > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@xxxxxxxxxxxxxxxxxxx > > http://lists.xensource.com/xen-users > > -------------------------------------------------------------------------- > > Live connected with Hotmail on your phone. [1]Learn more. > > > > -------------------------------------------------------------------------- > > Live connected with Hotmail on your phone. [2]Learn more. > > > > References > > Visible links > 1. http://go.microsoft.com/?linkid=9708117 > 2. http://go.microsoft.com/?linkid=9708117 _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |