[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] PCI Passthrough to Windows DomU with iCore and P55chipset ?



i don't know, which one i should order
i need a classic pci slot for an ISDN Card in Windows

the second pci slot i could use for a ISDN Fax Server, but with an hvm passtrough, both pci slot are forwarding to the windows Server, so i could get the cheaper WB Board.

Mr. Teo En Ming (Zhang Enming) schrieb:
which one are you getting?

--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering)
Alma Maters:
(1) Singapore Polytechnic
(2) National University of Singapore
My Primary Blog: http://teo-en-ming-aka-zhang-enming.blogspot.com
My Secondary Blog: http://enmingteo.wordpress.com
My Youtube videos: http://www.youtube.com/user/enmingteo
Email: space.time.universe@xxxxxxxxx <mailto:space.time.universe@xxxxxxxxx>
Mobile Phone (Starhub Prepaid): +65-8369-2618
Street: Bedok Reservoir Road
Country: Singapore

2009/11/5 Velten Spägele <xen@xxxxxxxxx <mailto:xen@xxxxxxxxx>>

    for anybody who cares :)


    The cheaper DP55WB also supports VT-D since Release 0142

    http://downloadmirror.intel.com/18170/eng/WB_0144_ReleaseNotes.pdf





    Mr. Teo En Ming (Zhang Enming) schrieb:

        Hope I can upgrade to P55 platform next year.


-- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics)
        BEng(Hons)(Mechanical Engineering)
        Alma Maters:
        (1) Singapore Polytechnic
        (2) National University of Singapore
        My Primary Blog: http://teo-en-ming-aka-zhang-enming.blogspot.com
        My Secondary Blog: http://enmingteo.wordpress.com
        My Youtube videos: http://www.youtube.com/user/enmingteo
        Email: space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
        <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>

        Mobile Phone (Starhub Prepaid): +65-8369-2618
        Street: Bedok Reservoir Road
        Country: Singapore

        On Mon, Nov 2, 2009 at 11:04 PM, Robert Dunkley
        <Robert@xxxxxxxxx <mailto:Robert@xxxxxxxxx>
        <mailto:Robert@xxxxxxxxx <mailto:Robert@xxxxxxxxx>>> wrote:

           Sounds good, P55 can definitely support VT-d so if Intel have
        added
           bios support then it should work fine.

After a bit of Googling I heard mention that quite a few of the
           ASRock P55 boards support VT-d too.

Rob

*From:* Mr. Teo En Ming (Zhang Enming)
           [mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
           <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>]
           *Sent:* 02 November 2009 14:43
           *To:* Velten Spägele
           *Cc:* Robert Dunkley; Xen users mailing list;
           space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
        <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>
           *Subject:* Re: [Xen-users] PCI Passthrough to Windows DomU with

           iCore and P55chipset ?

Hi Velten,

           I have done more research on Google and it is hopeful that DP55KG
           will support VT-d.

           Please refer to the following link:

http://www.google.com.sg/url?sa=t&source=web&ct=res&cd=5&ved=0CBgQFjAE&url=http%3A%2F%2Fdownloadmirror.intel.com%2F18171%2Feng%2FKG_3822_ReleaseNotes.pdf&rct=j&q=dp55kg+vt-d&ei=W-3uSqOgGMWPkQWA-p2XDw&usg=AFQjCNE7byyUr9G9Vs5-6BDd-r2vCmK5zQ
        
<http://www.google.com.sg/url?sa=t&source=web&ct=res&cd=5&ved=0CBgQFjAE&url=http%3A%2F%2Fdownloadmirror.intel.com%2F18171%2Feng%2FKG_3822_ReleaseNotes.pdf&rct=j&q=dp55kg+vt-d&ei=W-3uSqOgGMWPkQWA-p2XDw&usg=AFQjCNE7byyUr9G9Vs5-6BDd-r2vCmK5zQ>
<http://www.google.com.sg/url?sa=t&source=web&ct=res&cd=5&ved=0CBgQFjAE&url=http%3A%2F%2Fdownloadmirror.intel.com%2F18171%2Feng%2FKG_3822_ReleaseNotes.pdf&rct=j&q=dp55kg+vt-d&ei=W-3uSqOgGMWPkQWA-p2XDw&usg=AFQjCNE7byyUr9G9Vs5-6BDd-r2vCmK5zQ
        
<http://www.google.com.sg/url?sa=t&source=web&ct=res&cd=5&ved=0CBgQFjAE&url=http%3A%2F%2Fdownloadmirror.intel.com%2F18171%2Feng%2FKG_3822_ReleaseNotes.pdf&rct=j&q=dp55kg+vt-d&ei=W-3uSqOgGMWPkQWA-p2XDw&usg=AFQjCNE7byyUr9G9Vs5-6BDd-r2vCmK5zQ>>

           Please refer to Page 2.

           PRODUCTS: DP55KG, DP55SB, DP55WG (Standard BIOS)

           BIOS Version 3712

           New Fixes/Features:

           Added the capability to show/hide the Vt and Vt-d setup option.

           --    Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics)
           BEng(Hons)(Mechanical Engineering)
           Alma Maters:
           (1) Singapore Polytechnic
           (2) National University of Singapore
           My Primary Blog: http://teo-en-ming-aka-zhang-enming.blogspot.com
           My Secondary Blog: http://enmingteo.wordpress.com
           My Youtube videos: http://www.youtube.com/user/enmingteo
           Email: space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
           <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>
           Mobile Phone (Starhub Prepaid): +65-8369-2618
           Street: Bedok Reservoir Road
           Country: Singapore

           2009/11/2 Mr. Teo En Ming (Zhang Enming)
           <space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
        <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>>


           Dear Velten,

           Below is the link to a Intel DP55KG motherboard review by
           motherboards.org <http://motherboards.org>
        <http://motherboards.org>. This link shows the BIOS

           screenshot of DP55KG.

http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1948_p5_13.jpg

           As you can see in the image, there is the line that says:
        Intel VT
           for Directed I/O (VT-d). But there's no option for you to
        enable or
           disable the feature.

           I am wondering if you must enable Intel VT *first* before you can
           enable or disable VT-d.

           To enable VT, you need to have a processor that supports VT.
        The P55
           chipset definitely supports VT-d.

           I don't think Intel put VT-d line in the BIOS for fun.



           --    Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics)
           BEng(Hons)(Mechanical Engineering)
           Alma Maters:
           (1) Singapore Polytechnic
           (2) National University of Singapore
           My Primary Blog: http://teo-en-ming-aka-zhang-enming.blogspot.com
           My Secondary Blog: http://enmingteo.wordpress.com
           My Youtube videos: http://www.youtube.com/user/enmingteo
           Email: space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
           <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>
           MSN: teoenming@xxxxxxxxxxx <mailto:teoenming@xxxxxxxxxxx>
        <mailto:teoenming@xxxxxxxxxxx <mailto:teoenming@xxxxxxxxxxx>>
           Mobile Phone (SingTel): +65-9648-9798
           Mobile Phone (Starhub Prepaid): +65-8369-2618
           Age: 31 (as at 30 Oct 2009)
           Height: 1.78 meters
           Race: Chinese
           Dialect: Hokkien
           Street: Bedok Reservoir Road
           Country: Singapore

           2009/11/2 Mr. Teo En Ming (Zhang Enming)
           <space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
        <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>>


P55 chipset boards use the new Socket LGA1156. This socket
               supports both Core i5 and Core i7.
                       You should definitely get this instead of the
        older X58 chipset
               boards which use socket LGA1366. Socket LGA1366 only supports
               Core i7, not Core i5. X58 chipset supports VT-d too, as
        do Q35,
               Q45, X38, and X48 which are outdated.

               Intel releases P55 after X58.



               --        Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics)
               BEng(Hons)(Mechanical Engineering)
               Alma Maters:
               (1) Singapore Polytechnic
               (2) National University of Singapore
               My Primary Blog:
        http://teo-en-ming-aka-zhang-enming.blogspot.com
               My Secondary Blog: http://enmingteo.wordpress.com
               My Youtube videos: http://www.youtube.com/user/enmingteo
               Email: space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
               <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>

               MSN: teoenming@xxxxxxxxxxx <mailto:teoenming@xxxxxxxxxxx>
        <mailto:teoenming@xxxxxxxxxxx <mailto:teoenming@xxxxxxxxxxx>>


               Mobile Phone (SingTel): +65-9648-9798
               Mobile Phone (Starhub Prepaid): +65-8369-2618
               Age: 31 (as at 30 Oct 2009)
               Height: 1.78 meters
               Race: Chinese
               Dialect: Hokkien
               Street: Bedok Reservoir Road
               Country: Singapore

               2009/11/2 Velten Spägele <xen@xxxxxxxxx
        <mailto:xen@xxxxxxxxx> <mailto:xen@xxxxxxxxx
        <mailto:xen@xxxxxxxxx>>>


                   very interessting, but i want more than one pci
        classic slot



                   So i was looking for more informations, and find out that
                   there a low-budget iCore System without Hypermode, Turbo
                   Boost and VT-d, in most for iCore5

http://www.pctreiber.net/news/44-prozessoren/472-ueberblick-ueber-kommende-intel-cpus- http://www.heise.de/newsticker/meldung/Intel-Core-i3-i5-i7-Produktbezeichungen-und-Preise-durchgesickert-750777.html

                   So i'm not sure what i should do, an "old" Q45 with an
                   OuadCore is nearly the same price than a iCore7 with
        P55 Board.

                   So i will try to find more informations about the DP55KG
                   Extreme Board with vt-d, but with iCore7 it should be
        possible.



                   Mr. Teo En Ming (Zhang Enming) schrieb:

http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296>
<http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296>>
<http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296>
<http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401334&postcount=296>>>

http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297>
<http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297>>
<http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297>
<http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41401531&postcount=297>>>

http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298>
<http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298>>
<http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298>
<http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402197&postcount=298>>>

http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299>
<http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299>>
<http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299>
<http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299
        
<http://forums.hardwarezone.com.sg/showpost.php?p=41402497&postcount=299>>>



                   --            Mr. Teo En Ming (Zhang Enming)
        Dip(Mechatronics)
                   BEng(Hons)(Mechanical Engineering)
                   Alma Maters:
                   (1) Singapore Polytechnic
                   (2) National University of Singapore
                   My Primary Blog:
                   http://teo-en-ming-aka-zhang-enming.blogspot.com
                   My Secondary Blog: http://enmingteo.wordpress.com
                   My Youtube videos: http://www.youtube.com/user/enmingteo

                   Email: space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
                   <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>
                   <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>
                   <mailto:space.time.universe@xxxxxxxxx
        <mailto:space.time.universe@xxxxxxxxx>>>
                   MSN: teoenming@xxxxxxxxxxx
        <mailto:teoenming@xxxxxxxxxxx> <mailto:teoenming@xxxxxxxxxxx
        <mailto:teoenming@xxxxxxxxxxx>>
                   <mailto:teoenming@xxxxxxxxxxx
        <mailto:teoenming@xxxxxxxxxxx> <mailto:teoenming@xxxxxxxxxxx
        <mailto:teoenming@xxxxxxxxxxx>>>



                   Mobile Phone (SingTel): +65-9648-9798
                   Mobile Phone (Starhub Prepaid): +65-8369-2618
                   Age: 31 (as at 30 Oct 2009)
                   Height: 1.78 meters
                   Race: Chinese
                   Dialect: Hokkien
                   Street: Bedok Reservoir Road
                   Country: Singapore

                   2009/11/2 Robert Dunkley <Robert@xxxxxxxxx
        <mailto:Robert@xxxxxxxxx>
                   <mailto:Robert@xxxxxxxxx <mailto:Robert@xxxxxxxxx>>
        <mailto:Robert@xxxxxxxxx <mailto:Robert@xxxxxxxxx>

                   <mailto:Robert@xxxxxxxxx <mailto:Robert@xxxxxxxxx>>>>



                      Hi Velten,

                      VT-d support is not mentioned in the tech spec for the
                   dp55kg so I
                      would not risk it unless some one here has tried
        it and
                   knows it works.

                      Server equivalent like one of these would be a better
                   choice (They
                      specifically support VT-d):
http://www.intel.com/Products/Server/Motherboards/S3420GP/S3420GP-overview.htm

                      Rob

                      -----Original Message-----
                      From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>
                   <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>>
                      <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>
                   <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>>>
                      [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>
                   <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>>
                      <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>
                   <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx
        <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx>>>] On Behalf
                   Of Velten
                      Spägele
                      Sent: 02 November 2009 11:34
                      To: Xen Users
                      Subject: [Xen-users] PCI Passthrough to Windows
        DomU with
                   iCore and
                      P55chipset ?

                      would it be possible with the new p55 chipset ? the
                   dp55kg looks
                      interessting



                      Christian Tramnitz schrieb:
                       > Velten Spägele wrote:
                       >> Hi,
                       >>
                       >> i want to use an old AVM ISDN PCI Card in a
        Windows
                   DomU, is this
                       >> possible with vt-d and iommu ? What would be the
                   better choise,
                      Intel
                       >> or AMD ?
                       >
                       > Afaik there are no AMD boards with an IOMMU
        capable of
                   passing
                      through
                       > devices to an HVM guest, so Vt-d (which is an
                   Intel-term) is your
                      only
                       > choice for now.
                       > Supported (or better "working", since almost no
        vendor
                   gives official
                       > VT-d support with Xen) boards can be found here:
                       > http://wiki.xensource.com/xenwiki/VTdHowTo
                       >
                       > Best regards,
                       >    Christian
                       >
                       >
                       > _______________________________________________
                       > Xen-users mailing list

                       > Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>>


                       > http://lists.xensource.com/xen-users
                       >


                      _______________________________________________
                      Xen-users mailing list

                      Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>>


                      http://lists.xensource.com/xen-users

                      The SAQ Group

                      Registered Office: 18 Chapel Street, Petersfield,
                   Hampshire GU32 3DZ
                      SAQ is the trading name of SEMTEC Limited.
        Registered in
                   England & Wales
                      Company Number: 06481952

                      http://www.saqnet.co.uk AS29219

                      SAQ Group Delivers high quality, honestly priced
                   communication and
                      I.T. services to UK Business.

                      Broadband : Domains : Email : Hosting : CoLo :
        Servers :
                   Racks :
                      Transit : Backups : Managed Networks : Remote Support.

                      ISPA Member


                      _______________________________________________
                      Xen-users mailing list

                      Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>>


                      http://lists.xensource.com/xen-users






------------------------------------------------------------------------

                   _______________________________________________
                   Xen-users mailing list
                   Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
                   <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx
        <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>>
                   http://lists.xensource.com/xen-users







           **

           *The SAQ Group*

           *Registered Office: 18 Chapel Street, Petersfield, Hampshire
        GU32 3DZ*
           SAQ is the trading name of SEMTEC Limited. Registered in
        England & Wales
           Company Number: 06481952

http://www.saqnet.co.uk <http://www.saqnet.co.uk/> AS29219


           SAQ Group Delivers high quality, honestly priced
        communication and
           I.T. services to UK Business.

           Broadband : Domains : Email : Hosting : CoLo : Servers : Racks :
           Transit : Backups : Managed Networks : Remote Support.

SAQ Group

*ISPA Member*







        ------------------------------------------------------------------------

        _______________________________________________
        Xen-users mailing list
        Xen-users@xxxxxxxxxxxxxxxxxxx <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
        http://lists.xensource.com/xen-users






------------------------------------------------------------------------

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.