Re: [Xen-users] Ping interrupts and SSH laggy

["Peter Braun" <xenware@xxxxxxxxx>]

SOLVED!

The problem was that lag and ping interrupts was affecting only 2 domUs.
After some investigation we have found the we defined for those domUs same MACs.
With different MACs no problem at all.

Br

Peter Braun



2007/5/15, Peter Braun <xenware@xxxxxxxxx>:
> Bartolomiej, so now do you use Intel gigabit card without issues?
>
> At the moment am using e1000 as module compiled from latest intel sources.
> Am thinking about replacing the card with classic PCI 3Com 905c to avoid issues.
> Anyway am running on 100Mbit.
>
> Maybe is the problem that my Intel e1000 card is inthegrated on i965
> chipset based mobo which could be problematic to use with 2.6.16
> kernel but am having no issues with this mobo only with network - ping
> timeouts, laggy ssh.
>
> Any suggestion?
>
> Peter
>
>
> 2007/5/15, bdubas@xxxxxxxxxxx <bdubas@xxxxxxxxxxx>:
> > Hi,
> >
> > I had the problem with these network card. I use gentoo 2007. I adopt
> > driver from 2.6.17 kernel witch work in native kernel and its now works in
> > 2.6.16. I could post you the files maybe they will work for you.
> >
> > I also found that somebody (I don't have the strict URL) compile the
> > module form driver sources that are available on the Intel site.
> >
> > --
> > ASEC S.A.
> > Bartłomiej Dubas
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Peter Braun
> > Sent: Tuesday, May 15, 2007 8:01 AM
> > To: Xen users mailing list
> > Subject: Re: [Xen-users] Ping interrupts and SSH laggy
> >
> > Hi,
> >
> > thanks for the response.
> >
> > Is anybody here seeing same problems with e1000 and 2.6.16 kernel?
> >
> > BR
> >
> > Peter Braun
> >
> >
> > 2007/5/11, bdubas@xxxxxxxxxxx <bdubas@xxxxxxxxxxx>:
> > > Hi,
> > >
> > > I see that same hale the same problem with e1000 so I think that we have
> > > some similar machines.
> > >
> > > As the dom0 I use gentto 2007 distribution while it have XEN 3.0.4 from
> > > default. My compilation use is 250 Hz for kernel. I don't have any
> > reason
> > > why it should be this value I found it on the gentoo forum:
> > > http://forums.gentoo.org/viewtopic-t-551077-highlight-xen.html
> > >
> > >
> > > Best
> > > --
> > > ASEC S.A.
> > > Bartłomiej Dubas
> > >
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > >
> >
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users