RE: [Xen-users] Kernel Freeze - Xen 3.0.3

[Tim Post <tim.post@xxxxxxxxxxxxxxx>]

Did a little research for you, found some references to the same thing
(example is debian but its the same problem)

http://lists.debian.org/debian-amd64/2006/06/msg00166.html

Looks like you may have an architecture mis-match between your kernel,
modules, or modprobe itself.

One is 64, one is 32 .. and one may be 64 or 32 (word size). Anyway,
they all need to match.

So I'd check to be sure the initrd is up to date, and double check that
you installed the correct version of Xen wrt your OS. 

I think at this point you'd save time by just wiping and starting
over :)

Hope this helps.

Best,
-Tim

On Wed, 2006-10-18 at 16:57 -0300, Tiago Cruz wrote:
> Hello guys... I'm back :)
> 
> On Wed, 2006-10-18 at 11:44 -0300, Tiago Cruz wrote:
> 
> > I'll format with Fedora 5 and new Xen 3.0.3 and new packages... maybe
> > works...
> 
> Just to remember: Dell PowerEdge 2850, now running Fedora Core 5 and Xen
> 3.0.3 installed using latest RPM packages:
> 
> [root@xen tiago]# rpm -Uvh xen-3.0.3.0-1.i386.rpm 
> error: Failed dependencies:
>         libSDL-1.2.so.0 is needed by xen-3.0.3.0-1.i386
> 
> [root@xen tiago]# rpm -qf /usr/lib64/libSDL-1.2.so.0
> SDL-1.2.9-5.2.1
> 
> So, I've installed forced.
> 
> Now, the boot message has stopped when:
> 
> ...
> TCP reno registred
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI No-Shotcut mode
> Freeing unused kernel memory: 188k freed
> request_module: runaway loop modprobe binfmt-464c
> request_module: runaway loop modprobe binfmt-464c
> request_module: runaway loop modprobe binfmt-464c
> request_module: runaway loop modprobe binfmt-464c
> 
> and freeze here :(
> 
> This is the 'normal' dmesg:
> 
> .....
> TCP reno registered
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ACPI wakeup devices:
> PCI0 PALO PBLO PBHI VPR1 PICH
> ACPI: (supports S0 S4 S5)
> Freeing unused kernel memory: 196k freed
> Write protecting the kernel read-only data: 432k
> SCSI subsystem initialized
> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
> megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
> megaraid: probe new device 0x1028:0x0013:0x1028:0x016d: bus 2:slot 14:func 0
> GSI 19 sharing vector 0xC1 and IRQ 19
> ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 19
> megaraid: fw version:[521X] bios version:[H430]
> scsi0 : LSI Logic MegaRAID driver
> scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
>   Vendor: PE/PV     Model: 1x2 SCSI BP       Rev: 1.0
>   Type:   Processor                          ANSI SCSI revision: 02
> 
> 
> Any idea? 
> 
> Many thanks
> 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users