[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] RAID card problem
On Tuesday 09 May 2006 00:50, Yura Pismerov wrote: > I have a Quad Opteron machine (Tyan mobo) with 32GB RAM and I can't > to get it to work with a PCI RAID card. > I try it with Xen 3.0.2 (built from the source). I've already tried 2 > different cards (Adaptec 2120S and LSI Megaraid). > In both cases the boot process stops once card driver is loaded. It does > not attempt to load scsi_mod and probe the scsi bus. > A non-Xen kernel works fine with those cards on the same hardware. > Any ideas ? > I'm running a Quad Opteron (Dual-Core) with 16GB Ram on a tyan motherboard with xen 3.0.2. No troubles so far. Both the on-board LSI SCSI controller and an areca 24xSATA Raid6 controller work without problems. Do you have IOMMU enabled in the boards BIOS? /Ernst _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |