[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-ia64-devel] xen hypervisor logs on hp zx6000


  • To: xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
  • From: Dietmar Hahn <dietmar.hahn@xxxxxxxxxxxxxxxxxxx>
  • Date: Fri, 5 May 2006 16:03:20 +0200
  • Delivery-date: Fri, 05 May 2006 08:30:45 -0700
  • Domainkey-signature: s=s768; d=fujitsu-siemens.com; c=nofws; q=dns; b=z0QAukZCbsmDK4+kKhcIZLuu/kSTed63buMNlsG02L1UOLjtOXRlBGanF0/6nwyMkqbYRc6lwObsrlXq0fb4Ey3cQg6gEHzOwnYhF9ojp0w1ODB/DG6tHZ9+hiMzEOyu;
  • List-id: Discussion of the ia64 port of Xen <xen-ia64-devel.lists.xensource.com>

Am Freitag, 5. Mai 2006 12:08 schrieben Sie:
> Le Vendredi 05 Mai 2006 11:59, Dietmar Hahn a écrit :
> > Hi all,
> >
> > I tried xen on a hp zx6000 machine, but I don't get any xen-hypervisor
> > messages (starting with "(XEN) ") via the serial line. On boot the messages
> > I see are:
> [...]
> > After login I checked the hypervisor messages with 'xm dmesg'.
> > I saw the following problematic line:
> > ERROR: I/O base address must be specified.
> [...]
> > Does anybody know the correct configuration or has anybody an another
> > solution for that problem?
> Yes, set the I/O base address of com1, such as com1=116200,8n1,0x378,0.
> I am not sure about your values, but Linux print them.
> 
> Tristan.

Thanks, I looked something deeper and found that com1 is:
# cat /proc/tty/driver/serial:
...
0: uart:16550A mmio:0xFF5E0000 irq:50 tx:7832 rx:0 RTS|CTS|DTR|CD
...

So I changed my elilo.conf with:
append="com1=115200,8n1,0xff5e0000,50 console=com1 sched=bvt -- nomca 
console=tty0 console=ttyS0,115200 root=/dev/sda3"

Now I can see all the (XEN)... messages.
But now hangs the boot of dom0. The last messages I see are:
...
Kernel command line: nomca console=tty0 console=ttyS0,115200 root=/dev/sda3 ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Running on Xen! start_info_pfn=0x13dc nr_pages=0 flags=0x3
xen-event-channel using irq 233
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Placing software IO TLB between 0x10f70000 - 0x14f70000
Memory: 435072k/523264k available (10088k code, 87584k reserved, 4318k data, 
288k init)
Leaving McKinley Errata 9 workaround enabled

Here it stops and never gets further. I must reset the machine.
Thanks.

Dietmar.

-- 
Dietmar Hahn               Telephone: +49 (0) 89 636 40274
Fujitsu Siemens Computers  Telefax:   +49 (0) 89 636 40601
Otto-Hahn-Ring 6           Email:     dietmar.hahn@xxxxxxxxxxxxxxxxxxx
81739 München, Germany     Internet:  http://www.fujitsu-siemens.com

_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.