|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: xen cache colors in ARM
Hi Stefano, Thank you. If I build xen without colors support there is not this error. All the domains are booted well. Hense it can not be a hardware issue. This panic arrived during unpacking the rootfs. Here I attached the boot log xen/Dom0 without color. A highlighted strings printed exactly after the place where 1-st time panic arrived. Xen 4.16.1-pre (XEN) Xen version 4.16.1-pre (nole2390@(none)) (aarch64-portable-linux-gcc (GCC) 11.3.0) debug=y 2023-04-21 (XEN) Latest ChangeSet: Wed Apr 19 12:56:14 2023 +0300 git:321687b231-dirty (XEN) build-id: c1847258fdb1b79562fc710dda40008f96c0fde5 (XEN) Processor: 00000000410fd034: "ARM Limited", variant: 0x0, part 0xd03,rev 0x4 (XEN) 64-bit Execution: (XEN) Processor Features: 0000000000002222 0000000000000000 (XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32 (XEN) Extensions: FloatingPoint AdvancedSIMD (XEN) Debug Features: 0000000010305106 0000000000000000 (XEN) Auxiliary Features: 0000000000000000 0000000000000000 (XEN) Memory Model Features: 0000000000001122 0000000000000000 (XEN) ISA Features: 0000000000011120 0000000000000000 (XEN) 32-bit Execution: (XEN) Processor Features: 0000000000000131:0000000000011011 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle (XEN) Extensions: GenericTimer Security (XEN) Debug Features: 0000000003010066 (XEN) Auxiliary Features: 0000000000000000 (XEN) Memory Model Features: 0000000010201105 0000000040000000 (XEN) 0000000001260000 0000000002102211 (XEN) ISA Features: 0000000002101110 0000000013112111 0000000021232042 (XEN) 0000000001112131 0000000000011142 0000000000011121 (XEN) Using SMC Calling Convention v1.2 (XEN) Using PSCI v1.1 (XEN) SMP: Allowing 4 CPUs (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 100000 KHz (XEN) GICv2 initialization: (XEN) gic_dist_addr=00000000f9010000 (XEN) gic_cpu_addr=00000000f9020000 (XEN) gic_hyp_addr=00000000f9040000 (XEN) gic_vcpu_addr=00000000f9060000 (XEN) gic_maintenance_irq=25 (XEN) GICv2: Adjusting CPU interface base to 0xf902f000 (XEN) GICv2: 192 lines, 4 cpus, secure (IID 0200143b). (XEN) Using scheduler: null Scheduler (null) (XEN) Initializing null scheduler (XEN) WARNING: This is experimental software in development. (XEN) Use at your own risk. (XEN) Allocated console ring of 32 KiB. (XEN) CPU0: Guest atomics will try 12 times before pausing the domain (XEN) Bringing up CPU1 (XEN) CPU1: Guest atomics will try 13 times before pausing the domain (XEN) CPU 1 booted. (XEN) Bringing up CPU2 (XEN) CPU2: Guest atomics will try 13 times before pausing the domain (XEN) CPU 2 booted. (XEN) Bringing up CPU3 (XEN) CPU3: Guest atomics will try 13 times before pausing the domain (XEN) Brought up 4 CPUs (XEN) CPU 3 booted. (XEN) smmu: /axi/smmu@fd800000: probing hardware configuration... (XEN) smmu: /axi/smmu@fd800000: SMMUv2 with: (XEN) smmu: /axi/smmu@fd800000: stage 2 translation (XEN) smmu: /axi/smmu@fd800000: stream matching with 48 register groups, mask 0x7fff<2>smmu: /axi/smmu@fd800000: 16 context banks (0 stage-2 only) (XEN) smmu: /axi/smmu@fd800000: Stage-2: 48-bit IPA -> 48-bit PA (XEN) smmu: /axi/smmu@fd800000: registered 29 master devices (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID (XEN) P2M: 3 levels with order-1 root, VTCR 0x0000000080023558 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource (XEN) alternatives: Patching with alt table 00000000002cc5c8 -> 00000000002ccb2c (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading d0 kernel from boot module @ 0000000001000000 (XEN) Loading ramdisk from boot module @ 0000000002000000 (XEN) Allocating 1:1 mappings totalling 1600MB for dom0: (XEN) BANK[0] 0x00000010000000-0x00000020000000 (256MB) (XEN) BANK[1] 0x00000024000000-0x00000028000000 (64MB) (XEN) BANK[2] 0x00000030000000-0x00000080000000 (1280MB) (XEN) Grant table range: 0x00000000e00000-0x00000000e40000 (XEN) smmu: /axi/smmu@fd800000: d0: p2maddr 0x000000087bf94000 (XEN) Allocating PPI 16 for event channel interrupt (XEN) Extended region 0: 0x81200000->0xa0000000 (XEN) Extended region 1: 0xb1200000->0xc0000000 (XEN) Extended region 2: 0xc8000000->0xe0000000 (XEN) Extended region 3: 0xf0000000->0xf9000000 (XEN) Extended region 4: 0x100000000->0x600000000 (XEN) Extended region 5: 0x880000000->0x8000000000 (XEN) Extended region 6: 0x8001000000->0x10000000000 (XEN) Loading zImage from 0000000001000000 to 0000000010000000-0000000010e41008 (XEN) Loading d0 initrd from 0000000002000000 to 0x0000000013600000-0x000000001ff3a617 (XEN) Loading d0 DTB to 0x0000000013400000-0x000000001340cbdc (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input) (XEN) null.c:353: 0 <-- d0v0 (XEN) Freed 356kB init memory. (XEN) d0v0 Unhandled SMC/HVC: 0x84000050 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER16 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER20 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.72-xilinx-v2022.1 (oe-user@oe-host) (aarch64-portable-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Tue Feb 21 05:47:54 UTC 2023 [ 0.000000] Machine model: D14 Viper Board - White Unit [ 0.000000] Xen 4.16 support found [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000022000000-0x0000000022147fff] [ 0.000000] node 0: [mem 0x0000000022200000-0x0000000022347fff] [ 0.000000] node 0: [mem 0x0000000024000000-0x0000000027ffffff] [ 0.000000] node 0: [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000007fffffff] [ 0.000000] On node 0, zone DMA: 8192 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 184 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 7352 pages in unavailable ranges [ 0.000000] cma: Reserved 256 MiB at 0x000000006e000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 16 pages/cpu s32792 r0 d32744 u65536 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 403845 [ 0.000000] Kernel command line: console=hvc0 earlycon=xen earlyprintk=xen clk_ignore_unused fips=1 root=/dev/ram0 maxcpus=2 [ 0.000000] Unknown kernel command line parameters "earlyprintk=xen fips=1", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:on [ 0.000000] mem auto-init: clearing system memory may take some time... [ 0.000000] Memory: 1121936K/1641024K available (9728K kernel code, 836K rwdata, 2396K rodata, 1536K init, 262K bss, 256944K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns [ 0.000000] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns [ 0.000258] Console: colour dummy device 80x25 [ 0.310231] printk: console [hvc0] enabled [ 0.314403] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000) [ 0.324851] pid_max: default: 32768 minimum: 301 [ 0.329706] LSM: Security Framework initializing [ 0.334204] Yama: becoming mindful. [ 0.337865] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.345180] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.354743] xen:grant_table: Grant tables using version 1 layout [ 0.359132] Grant table initialized [ 0.362664] xen:events: Using FIFO-based ABI [ 0.366993] Xen: initializing cpu0 [ 0.370515] rcu: Hierarchical SRCU implementation. [ 0.375930] smp: Bringing up secondary CPUs ... (XEN) null.c:353: 1 <-- d0v1 (XEN) d0v1: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER0 [ 0.382549] Detected VIPT I-cache on CPU1 [ 0.388712] Xen: initializing cpu1 [ 0.388743] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.388829] smp: Brought up 1 node, 2 CPUs [ 0.406941] SMP: Total of 2 processors activated. [ 0.411698] CPU features: detected: 32-bit EL0 Support [ 0.416888] CPU features: detected: CRC32 instructions [ 0.422121] CPU: All CPU(s) started at EL1 [ 0.426248] alternatives: patching kernel code [ 0.431424] devtmpfs: initialized [ 0.441454] KASLR enabled [ 0.441602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.448321] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.496183] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.498277] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.503772] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.511610] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.519478] audit: initializing netlink subsys (disabled) [ 0.524985] audit: type=2000 audit(0.336:1): state=initialized audit_enabled=0 res=1 [ 0.529169] thermal_sys: Registered thermal governor 'step_wise' [ 0.533023] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.545608] ASID allocator initialised with 32768 entries [ 0.551030] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB [ 0.559332] software IO TLB: mapped [mem 0x0000000011800000-0x0000000011c00000] (4MB) [ 0.583565] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.584721] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.591478] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.598225] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.636520] DRBG: Continuing without Jitter RNG [ 0.737187] raid6: neonx8 gen() 2143 MB/s [ 0.805294] raid6: neonx8 xor() 1589 MB/s [ 0.873406] raid6: neonx4 gen() 2177 MB/s [ 0.941499] raid6: neonx4 xor() 1556 MB/s [ 1.009612] raid6: neonx2 gen() 2072 MB/s [ 1.077715] raid6: neonx2 xor() 1430 MB/s [ 1.145834] raid6: neonx1 gen() 1769 MB/s [ 1.213935] raid6: neonx1 xor() 1214 MB/s [ 1.282046] raid6: int64x8 gen() 1366 MB/s [ 1.350132] raid6: int64x8 xor() 773 MB/s [ 1.418259] raid6: int64x4 gen() 1602 MB/s [ 1.486349] raid6: int64x4 xor() 851 MB/s [ 1.554464] raid6: int64x2 gen() 1396 MB/s [ 1.622561] raid6: int64x2 xor() 744 MB/s [ 1.690687] raid6: int64x1 gen() 1033 MB/s [ 1.758770] raid6: int64x1 xor() 517 MB/s [ 1.758809] raid6: using algorithm neonx4 gen() 2177 MB/s [ 1.762941] raid6: .... xor() 1556 MB/s, rmw enabled [ 1.767957] raid6: using neon recovery algorithm [ 1.772824] xen:balloon: Initialising balloon driver [ 1.778021] iommu: Default domain type: Translated [ 1.782584] iommu: DMA domain TLB invalidation policy: strict mode [ 1.789149] SCSI subsystem initialized [ 1.792820] usbcore: registered new interface driver usbfs [ 1.798254] usbcore: registered new interface driver hub [ 1.803626] usbcore: registered new device driver usb [ 1.808761] pps_core: LinuxPPS API ver. 1 registered [ 1.813716] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 1.822903] PTP clock support registered [ 1.826893] EDAC MC: Ver: 3.0.0 [ 1.830375] zynqmp-ipi-mbox mailbox@ff990400: Registered ZynqMP IPI mbox with TX/RX channels. [ 1.838863] zynqmp-ipi-mbox mailbox@ff990600: Registered ZynqMP IPI mbox with TX/RX channels. [ 1.847356] zynqmp-ipi-mbox mailbox@ff990800: Registered ZynqMP IPI mbox with TX/RX channels. [ 1.855907] FPGA manager framework [ 1.859952] clocksource: Switched to clocksource arch_sys_counter [ 1.871712] NET: Registered PF_INET protocol family [ 1.871838] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.879392] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 1.887078] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.894846] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.902900] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 1.910350] TCP: Hash tables configured (established 16384 bind 16384) [ 1.916778] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 1.923509] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 1.930759] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.936834] RPC: Registered named UNIX socket transport module. [ 1.942342] RPC: Registered udp transport module. [ 1.947088] RPC: Registered tcp transport module. [ 1.951843] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.958334] PCI: CLS 0 bytes, default 64 [ 1.962709] Trying to unpack rootfs image as initramfs... [ 1.977090] workingset: timestamp_bits=62 max_order=19 bucket_order=0 [ 1.982863] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 2.021045] NET: Registered PF_ALG protocol family [ 2.021122] xor: measuring software checksum speed [ 2.029347] 8regs : 2366 MB/sec [ 2.033081] 32regs : 2802 MB/sec [ 2.038223] arm64_neon : 2320 MB/sec [ 2.038385] xor: using function: 32regs (2802 MB/sec) [ 2.043614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.050959] io scheduler mq-deadline registered [ 2.055521] io scheduler kyber registered [ 2.068227] xen:xen_evtchn: Event-channel device installed [ 2.069281] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.076190] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 2.085548] brd: module loaded [ 2.089290] loop: module loaded [ 2.089341] Invalid max_queues (4), will use default max: 2. [ 2.094565] tun: Universal TUN/TAP device driver, 1.6 [ 2.098655] xen_netfront: Initialising Xen virtual ethernet driver [ 2.104156] usbcore: registered new interface driver rtl8150 [ 2.109813] usbcore: registered new interface driver r8152 [ 2.115367] usbcore: registered new interface driver asix [ 2.120794] usbcore: registered new interface driver ax88179_178a [ 2.126934] usbcore: registered new interface driver cdc_ether [ 2.132816] usbcore: registered new interface driver cdc_eem [ 2.138527] usbcore: registered new interface driver net1080 [ 2.144256] usbcore: registered new interface driver cdc_subset [ 2.150205] usbcore: registered new interface driver zaurus [ 2.155837] usbcore: registered new interface driver cdc_ncm [ 2.161550] usbcore: registered new interface driver r8153_ecm [ 2.168240] usbcore: registered new interface driver cdc_acm [ 2.173109] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.181358] usbcore: registered new interface driver uas [ 2.186547] usbcore: registered new interface driver usb-storage [ 2.192643] usbcore: registered new interface driver ftdi_sio [ 2.198384] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.206118] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 2.215332] i2c_dev: i2c /dev entries driver [ 2.220467] xen_wdt xen_wdt: initialized (timeout=60s, nowayout=0) [ 2.225923] device-mapper: uevent: version 1.0.3 [ 2.230668] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@xxxxxxxxxx [ 2.239315] EDAC MC0: Giving out device to module 1 controller synps_ddr_controller: DEV synps_edac (INTERRUPT) [ 2.249405] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT) [ 2.261719] sdhci: Secure Digital Host Controller Interface driver [ 2.267487] sdhci: Copyright(c) Pierre Ossman [ 2.271890] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.278157] ledtrig-cpu: registered to indicate activity on CPUs [ 2.283816] zynqmp_firmware_probe Platform Management API v1.1 [ 2.289554] zynqmp_firmware_probe Trustzone version v1.0 [ 2.327875] securefw securefw: securefw probed [ 2.328324] alg: No test for xilinx-zynqmp-aes (zynqmp-aes) [ 2.332563] zynqmp_aes firmware:zynqmp-firmware:zynqmp-aes: AES Successfully Registered [ 2.341183] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa) [ 2.347667] remoteproc remoteproc0: ff9a0000.rf5ss:r5f_0 is available [ 2.353003] remoteproc remoteproc1: ff9a0000.rf5ss:r5f_1 is available [ 2.362605] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered [ 2.366540] viper-xen-proxy viper-xen-proxy: Viper Xen Proxy registered [ 2.372525] viper-vdpp a4000000.vdpp: Device Tree Probing [ 2.377778] viper-vdpp a4000000.vdpp: VDPP Version: 1.3.9.0 Info: 1.512.15.0 KeyLen: 32 [ 2.386432] viper-vdpp a4000000.vdpp: Unable to register tamper handler. Retrying... [ 2.394094] viper-vdpp-net a5000000.vdpp_net: Device Tree Probing [ 2.399854] viper-vdpp-net a5000000.vdpp_net: Device registered [ 2.405931] viper-vdpp-stat a8000000.vdpp_stat: Device Tree Probing [ 2.412037] viper-vdpp-stat a8000000.vdpp_stat: Build parameters: VTI Count: 512 Event Count: 32 [ 2.420856] default preset [ 2.423797] viper-vdpp-stat a8000000.vdpp_stat: Device registered [ 2.430054] viper-vdpp-rng ac000000.vdpp_rng: Device Tree Probing [ 2.435948] viper-vdpp-rng ac000000.vdpp_rng: Device registered [ 2.441976] vmcu driver init [ 2.444922] VMCU: : (240:0) registered [ 2.444956] In K81 Updater init [ 2.449003] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 2.468833] Initializing XFRM netlink socket [ 2.468902] NET: Registered PF_PACKET protocol family [ 2.472729] Bridge firewalling registered [ 2.476785] 8021q: 802.1Q VLAN Support v1.8 [ 2.481341] registered taskstats version 1 [ 2.486394] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.503145] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 36, base_baud = 6250000) is a xuartps [ 2.507103] of-fpga-region fpga-full: FPGA Region probed [ 2.512986] xilinx-zynqmp-dma fd500000.dma-controller: ZynqMP DMA driver Probe success [ 2.520267] xilinx-zynqmp-dma fd510000.dma-controller: ZynqMP DMA driver Probe success [ 2.528239] xilinx-zynqmp-dma fd520000.dma-controller: ZynqMP DMA driver Probe success [ 2.536152] xilinx-zynqmp-dma fd530000.dma-controller: ZynqMP DMA driver Probe success [ 2.544153] xilinx-zynqmp-dma fd540000.dma-controller: ZynqMP DMA driver Probe success [ 2.552127] xilinx-zynqmp-dma fd550000.dma-controller: ZynqMP DMA driver Probe success [ 2.560178] xilinx-zynqmp-dma ffa80000.dma-controller: ZynqMP DMA driver Probe success [ 2.567987] xilinx-zynqmp-dma ffa90000.dma-controller: ZynqMP DMA driver Probe success [ 2.576018] xilinx-zynqmp-dma ffaa0000.dma-controller: ZynqMP DMA driver Probe success [ 2.583889] xilinx-zynqmp-dma ffab0000.dma-controller: ZynqMP DMA driver Probe success [ 2.946379] spi-nor spi0.0: mt25qu512a (131072 Kbytes) [ 2.946467] 2 fixed-partitions partitions found on MTD device spi0.0 [ 2.952393] Creating 2 MTD partitions on "spi0.0": [ 2.957231] 0x000004000000-0x000008000000 : "bank A" [ 2.963332] 0x000000000000-0x000004000000 : "bank B" [ 2.968694] macb ff0b0000.ethernet: Not enabling partial store and forward [ 2.975333] macb ff0b0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0b0000 irq 25 (18:41:fe:0f:ff:02) [ 2.984472] macb ff0c0000.ethernet: Not enabling partial store and forward [ 2.992144] macb ff0c0000.ethernet eth1: Cadence GEM rev 0x50070106 at 0xff0c0000 irq 26 (18:41:fe:0f:ff:03) [ 3.001043] viper_enet viper_enet: Viper power GPIOs initialised [ 3.007313] viper_enet viper_enet vnet0 (uninitialized): Validate interface QSGMII [ 3.014914] viper_enet viper_enet vnet1 (uninitialized): Validate interface QSGMII [ 3.022138] viper_enet viper_enet vnet1 (uninitialized): Validate interface type 18 [ 3.030274] viper_enet viper_enet vnet2 (uninitialized): Validate interface QSGMII [ 3.037785] viper_enet viper_enet vnet3 (uninitialized): Validate interface QSGMII [ 3.045301] viper_enet viper_enet: Viper enet registered [ 3.050958] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM [ 3.057135] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM [ 3.063538] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM [ 3.069920] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM [ 3.097729] si70xx: probe of 2-0040 failed with error -5 [ 3.098042] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s [ 3.105111] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer with timeout 10s [ 3.112457] viper-tamper viper-tamper: Device registered [ 3.117593] active_bank active_bank: boot bank: 1 [ 3.122184] active_bank active_bank: boot mode: (0x02) qspi32 [ 3.128247] viper-vdpp a4000000.vdpp: Device Tree Probing [ 3.133439] viper-vdpp a4000000.vdpp: VDPP Version: 1.3.9.0 Info: 1.512.15.0 KeyLen: 32 [ 3.142151] viper-vdpp a4000000.vdpp: Tamper handler registered [ 3.147438] viper-vdpp a4000000.vdpp: Device registered [ 3.153007] lpc55_l2 spi1.0: registered handler for protocol 0 [ 3.158582] lpc55_user lpc55_user: The major number for your device is 236 [ 3.165976] lpc55_l2 spi1.0: registered handler for protocol 1 [ 3.181999] rtc-lpc55 rtc_lpc55: lpc55_rtc_get_time: bad result: 1 [ 3.182856] rtc-lpc55 rtc_lpc55: registered as rtc0 [ 3.188656] lpc55_l2 spi1.0: (2) mcu still not ready? [ 3.193744] lpc55_l2 spi1.0: (3) mcu still not ready? [ 3.198848] lpc55_l2 spi1.0: (4) mcu still not ready? [ 3.202932] mmc0: SDHCI controller on ff160000.mmc [ff160000.mmc] using ADMA 64-bit [ 3.210689] lpc55_l2 spi1.0: (5) mcu still not ready? [ 3.215694] lpc55_l2 spi1.0: rx error: -110 [ 3.284438] mmc0: new HS200 MMC card at address 0001 [ 3.285179] mmcblk0: mmc0:0001 SEM16G 14.6 GiB [ 3.291784] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 3.293915] mmcblk0boot0: mmc0:0001 SEM16G 4.00 MiB [ 3.299054] mmcblk0boot1: mmc0:0001 SEM16G 4.00 MiB [ 3.303905] mmcblk0rpmb: mmc0:0001 SEM16G 4.00 MiB, chardev (244:0) [ 3.582676] rtc-lpc55 rtc_lpc55: lpc55_rtc_get_time: bad result: 1 [ 3.583332] rtc-lpc55 rtc_lpc55: hctosys: unable to read the hardware clock [ 3.591252] cdns-i2c ff020000.i2c: recovery information complete [ 3.597085] at24 0-0050: supply vcc not found, using dummy regulator [ 3.603011] lpc55_l2 spi1.0: (2) mcu still not ready? [ 3.608093] at24 0-0050: 256 byte spd EEPROM, read-only [ 3.613620] lpc55_l2 spi1.0: (3) mcu still not ready? [ 3.619362] lpc55_l2 spi1.0: (4) mcu still not ready? [ 3.624224] rtc-rv3028 0-0052: registered as rtc1 [ 3.628343] lpc55_l2 spi1.0: (5) mcu still not ready? [ 3.633253] lpc55_l2 spi1.0: rx error: -110 [ 3.639104] k81_bootloader 0-0010: probe [ 3.641628] VMCU: : (235:0) registered [ 3.641635] k81_bootloader 0-0010: probe completed [ 3.668346] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 28 [ 3.669154] cdns-i2c ff030000.i2c: recovery information complete [ 3.675412] lm75 1-0048: supply vs not found, using dummy regulator [ 3.682920] lm75 1-0048: hwmon1: sensor 'tmp112' [ 3.686548] i2c i2c-1: Added multiplexed i2c bus 3 [ 3.690795] i2c i2c-1: Added multiplexed i2c bus 4 [ 3.695629] i2c i2c-1: Added multiplexed i2c bus 5 [ 3.700492] i2c i2c-1: Added multiplexed i2c bus 6 [ 3.705157] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 3.713049] at24 1-0054: supply vcc not found, using dummy regulator [ 3.720067] at24 1-0054: 1024 byte 24c08 EEPROM, read-only [ 3.724761] cdns-i2c ff030000.i2c: 100 kHz mmio ff030000 irq 29 [ 3.731272] sfp viper_enet:sfp-eth1: Host maximum power 2.0W [ 3.737549] sfp_register_socket: got sfp_bus [ 3.740709] sfp_register_socket: register sfp_bus [ 3.745459] sfp_register_bus: ops ok! [ 3.749179] sfp_register_bus: Try to attach [ 3.753419] sfp_register_bus: Attach succeeded [ 3.757914] sfp_register_bus: upstream ops attach [ 3.762677] sfp_register_bus: Bus registered [ 3.766999] sfp_register_socket: register sfp_bus succeeded [ 3.775870] of_cfs_init [ 3.776000] of_cfs_init: OK [ 3.778211] clk: Not disabling unused clocks [ 11.278477] Freeing initrd memory: 206056K [ 11.279406] Freeing unused kernel memory: 1536K [ 11.314006] Checked W+X mappings: passed, no W+X pages found [ 11.314142] Run /init as init process INIT: version 3.01 booting fsck (busybox 1.35.0) /dev/mmcblk0p1: clean, 12/102400 files, 238162/409600 blocks /dev/mmcblk0p2: clean, 12/102400 files, 171972/409600 blocks /dev/mmcblk0p3 was not cleanly unmounted, check forced. /dev/mmcblk0p3: 20/4096 files (0.0% non-contiguous), 663/16384 blocks [ 11.553073] EXT4-fs (mmcblk0p3): mounted filesystem without journal. Opts: (null). Quota mode: disabled. Starting random number generator daemon. [ 11.580662] random: crng init done Starting udev [ 11.613159] udevd[142]: starting version 3.2.10 [ 11.620385] udevd[143]: starting eudev-3.2.10 [ 11.704481] macb ff0b0000.ethernet control_red: renamed from eth0 [ 11.720264] macb ff0c0000.ethernet control_black: renamed from eth1 [ 12.063396] ip_local_port_range: prefer different parity for start/end values. [ 12.084801] rtc-lpc55 rtc_lpc55: lpc55_rtc_get_time: bad result: 1 hwclock: RTC_RD_TIME: Invalid exchange Mon Feb 27 08:40:53 UTC 2023 [ 12.115309] rtc-lpc55 rtc_lpc55: lpc55_rtc_set_time: bad result hwclock: RTC_SET_TIME: Invalid exchange [ 12.131027] rtc-lpc55 rtc_lpc55: lpc55_rtc_get_time: bad result: 1 Starting mcud INIT: Entering runlevel: 5 Configuring network interfaces... done. resetting network interface [ 12.718295] macb ff0b0000.ethernet control_red: PHY [ff0b0000.ethernet-ffffffff:02] driver [Xilinx PCS/PMA PHY] (irq=POLL) [ 12.723919] macb ff0b0000.ethernet control_red: configuring for phy/gmii link mode [ 12.732151] pps pps0: new PPS source ptp0 [ 12.735563] macb ff0b0000.ethernet: gem-ptp-timer ptp clock registered. [ 12.745724] macb ff0c0000.ethernet control_black: PHY [ff0c0000.ethernet-ffffffff:01] driver [Xilinx PCS/PMA PHY] (irq=POLL) [ 12.753469] macb ff0c0000.ethernet control_black: configuring for phy/gmii link mode [ 12.761804] pps pps1: new PPS source ptp1 [ 12.765398] macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. Auto-negotiation: off Auto-negotiation: off [ 16.828151] macb ff0b0000.ethernet control_red: unable to generate target frequency: 125000000 Hz [ 16.834553] macb ff0b0000.ethernet control_red: Link is Up - 1Gbps/Full - flow control off [ 16.860552] macb ff0c0000.ethernet control_black: unable to generate target frequency: 125000000 Hz [ 16.867052] macb ff0c0000.ethernet control_black: Link is Up - 1Gbps/Full - flow control off Starting Failsafe Secure Shell server in port 2222: sshd done. Starting rpcbind daemon...done. [ 17.093019] rtc-lpc55 rtc_lpc55: lpc55_rtc_get_time: bad result: 1 hwclock: RTC_RD_TIME: Invalid exchange Starting State Manager Service Start state-manager restarter... (XEN) d0v1 Forwarding AES operation: 3254779951 Starting /usr/sbin/xenstored....[ 17.265256] BTRFS: device fsid 80efc224-c202-4f8e-a949-4dae7f04a0aa devid 1 transid 744 /dev/dm-0 scanned by udevd (385) [ 17.349933] BTRFS info (device dm-0): disk space caching is enabled [ 17.350670] BTRFS info (device dm-0): has skinny extents [ 17.364384] BTRFS info (device dm-0): enabling ssd optimizations [ 17.830462] BTRFS: device fsid 27ff666b-f4e5-4f90-9054-c210db5b2e2e devid 1 transid 6 /dev/mapper/client_prov scanned by mkfs.btrfs (526) [ 17.872699] BTRFS info (device dm-1): using free space tree [ 17.872771] BTRFS info (device dm-1): has skinny extents [ 17.878114] BTRFS info (device dm-1): flagging fs with big metadata feature [ 17.894289] BTRFS info (device dm-1): enabling ssd optimizations [ 17.895695] BTRFS info (device dm-1): checking UUID tree Setting domain 0 name, domid and JSON config... Done setting up Dom0 Starting xenconsoled... Starting QEMU as disk backend for dom0 Starting domain watchdog daemon: xenwatchdogd startup [ 18.408647] BTRFS: device fsid 5e08d5e9-bc2a-46b9-af6a-44c7087b8921 devid 1 transid 6 /dev/mapper/client_config scanned by mkfs.btrfs (574) [done] [ 18.465552] BTRFS info (device dm-2): using free space tree [ 18.465629] BTRFS info (device dm-2): has skinny extents [ 18.471002] BTRFS info (device dm-2): flagging fs with big metadata feature Starting crond: [ 18.482371] BTRFS info (device dm-2): enabling ssd optimizations [ 18.486659] BTRFS info (device dm-2): checking UUID tree OK starting rsyslogd ... Log partition ready after 0 poll loops done rsyslogd: cannot connect to 172.18.0.1:514: Network is unreachable [v8.2208.0 try https://www.rsyslog.com/e/2027 ] [ 18.670637] BTRFS: device fsid 39d7d9e1-967d-478e-94ae-690deb722095 devid 1 transid 608 /dev/dm-3 scanned by udevd (518) Please insert USB token and enter your role in login prompt. login: Regards, O. пн, 24 апр. 2023 г. в 23:39, Stefano Stabellini <sstabellini@xxxxxxxxxx>: Hi Oleg,
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |