[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: xen cache colors in ARM
Thanks Michal,
You gave me an idea. I am going to try it today.
Regards, O.
Thanks Stefano.
I am going to do it today.
Regards, O.
On Wed, 19 Apr 2023, Oleg Nikitenko wrote:
> Hi Michal,
>
> I corrected xen's command line.
> Now it is
> xen,xen-bootargs = "console=dtuart dtuart=serial0 dom0_mem=1600M dom0_max_vcpus=2 dom0_vcpus_pin bootscrub=0 vwfi=native sched=null
> timer_slop=0 way_size=65536 xen_colors=0-3 dom0_colors=4-7";
4 colors is way too many for xen, just do xen_colors=0-0. There is no
advantage in using more than 1 color for Xen.
4 colors is too few for dom0, if you are giving 1600M of memory to Dom0.
Each color is 256M. For 1600M you should give at least 7 colors. Try:
xen_colors=0-0 dom0_colors=1-8
> Unfortunately the result was the same.
>
> (XEN) - Dom0 mode: Relaxed
> (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
> (XEN) P2M: 3 levels with order-1 root, VTCR 0x0000000080023558
> (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource
> (XEN) Coloring general information
> (XEN) Way size: 64kB
> (XEN) Max. number of colors available: 16
> (XEN) Xen color(s): [ 0 ]
> (XEN) alternatives: Patching with alt table 00000000002cc690 -> 00000000002ccc0c
> (XEN) Color array allocation failed for dom0
> (XEN)
> (XEN) ****************************************
> (XEN) Panic on CPU 0:
> (XEN) Error creating domain 0
> (XEN) ****************************************
> (XEN)
> (XEN) Reboot in five seconds...
>
> I am going to find out how command line arguments passed and parsed.
>
> Regards,
> Oleg
>
> ср, 19 апр. 2023 г. в 11:25, Oleg Nikitenko <oleshiiwood@xxxxxxxxx>:
> Hi Michal,
>
> You put my nose into the problem. Thank you.
> I am going to use your point.
> Let's see what happens.
>
> Regards,
> Oleg
>
>
> ср, 19 апр. 2023 г. в 10:37, Michal Orzel <michal.orzel@xxxxxxx>:
> Hi Oleg,
>
> On 19/04/2023 09:03, Oleg Nikitenko wrote:
> >
> >
> >
> > Hello Stefano,
> >
> > Thanks for the clarification.
> > My company uses yocto for image generation.
> > What kind of information do you need to consult me in this case ?
> >
> > Maybe modules sizes/addresses which were mentioned by @Julien Grall <mailto:julien@xxxxxxx> ?
>
> Sorry for jumping into discussion, but FWICS the Xen command line you provided seems to be not the one
> Xen booted with. The error you are observing most likely is due to dom0 colors configuration not being
> specified (i.e. lack of dom0_colors=<> parameter). Although in the command line you provided, this parameter
> is set, I strongly doubt that this is the actual command line in use.
>
> You wrote:
> xen,xen-bootargs = "console=dtuart dtuart=serial0 dom0_mem=1600M dom0_max_vcpus=2 dom0_vcpus_pin bootscrub=0 vwfi=native
> sched=null timer_slop=0 way_szize=65536 xen_colors=0-3 dom0_colors=4-7";
>
> but:
> 1) way_szize has a typo
> 2) you specified 4 colors (0-3) for Xen, but the boot log says that Xen has only one:
> (XEN) Xen color(s): [ 0 ]
>
> This makes me believe that no colors configuration actually end up in command line that Xen booted with.
> Single color for Xen is a "default if not specified" and way size was probably calculated by asking HW.
>
> So I would suggest to first cross-check the command line in use.
>
> ~Michal
>
>
> >
> > Regards,
> > Oleg
> >
> > вт, 18 апр. 2023 г. в 20:44, Stefano Stabellini <sstabellini@xxxxxxxxxx <mailto:sstabellini@xxxxxxxxxx>>:
> >
> > On Tue, 18 Apr 2023, Oleg Nikitenko wrote:
> > > Hi Julien,
> > >
> > > >> This feature has not been merged in Xen upstream yet
> > >
> > > > would assume that upstream + the series on the ML [1] work
> > >
> > > Please clarify this point.
> > > Because the two thoughts are controversial.
> >
> > Hi Oleg,
> >
> > As Julien wrote, there is nothing controversial. As you are aware,
> > Xilinx maintains a separate Xen tree specific for Xilinx here:
> > https://github.com/xilinx/xen <https://github.com/xilinx/xen>
> >
> > and the branch you are using (xlnx_rebase_4.16) comes from there.
> >
> >
> > Instead, the upstream Xen tree lives here:
> > https://xenbits.xen.org/gitweb/?p=xen.git;a=summary <https://xenbits.xen.org/gitweb/?p=xen.git;a=summary>
> >
> >
> > The Cache Coloring feature that you are trying to configure is present
> > in xlnx_rebase_4.16, but not yet present upstream (there is an
> > outstanding patch series to add cache coloring to Xen upstream but it
> > hasn't been merged yet.)
> >
> >
> > Anyway, if you are using xlnx_rebase_4.16 it doesn't matter too much for
> > you as you already have Cache Coloring as a feature there.
> >
> >
> > I take you are using ImageBuilder to generate the boot configuration? If
> > so, please post the ImageBuilder config file that you are using.
> >
> > But from the boot message, it looks like the colors configuration for
> > Dom0 is incorrect.
> >
>
>
>
|
