[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] ARM64:Porting xen to new hardware
On 09/29/2017 09:15 AM, bharat gohil wrote: Hello Hi, Please avoid top-posting. The patch didn't work in my case. The patch will be useful only if the compatible string in the DT of your UART is "snps,dw-apb-uart". What is the compatible string for it? Cheers, Thanks, BharatOn Mon, Sep 25, 2017 at 11:38 PM, Oleksandr Tyshchenko <olekstysh@xxxxxxxxx <mailto:olekstysh@xxxxxxxxx>> wrote:Hi, Bharat On Mon, Sep 25, 2017 at 8:40 PM, bharat gohil <ghl.bhrt@xxxxxxxxx <mailto:ghl.bhrt@xxxxxxxxx>> wrote: > > > On 25-Sep-2017 6:59 PM, "Julien Grall" <julien.grall@xxxxxxx <mailto:julien.grall@xxxxxxx>> wrote: > > Hi, > > I am using same setup. > It just my guess because no response to key ctrl+a input. > > SoC has 8250 compitible UART.I will print character in receive handler of > UART in Xen. Do we have any other hook test this? Maybe you got stuck in the UART interrupt handler. Can you recheck? If so, can you take a look at the patch which has been posted recently: https://patchwork.kernel.org/patch/9959003/ <https://patchwork.kernel.org/patch/9959003/> > > One more thing, is big-little supported in xen? > How Xen distribute load among the CPUs or Xen only run in context of the > guest only? > In my setup Dom0 use energy aware scheduler. > > Thanks, > Bharat > > > On 09/25/2017 01:53 PM, bharat gohil wrote: >> >> Hello Andrii, >> >> I tried but no success. >> It looks, Xen is not running. > > > I am a bit confused... on one of the previous e-mail you posted log from > Xen: > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > > (XEN) Freed 272kB init memory. > > So unless you have a completely new setup, Xen is definitely running. > However, what may happen is the serial driver in Xen does not receive input > characters. > > One of the first test would be to check whether the driver effectively > receive characters. > > Cheers, > >> >> Thanks, >> Bharat >> >> >> On Mon, Sep 25, 2017 at 5:45 PM, Andrii Anisov <andrii_anisov@xxxxxxxx <mailto:andrii_anisov@xxxxxxxx> >> <mailto:andrii_anisov@xxxxxxxx <mailto:andrii_anisov@xxxxxxxx>>> wrote: >> >> Hello Bharat, >> >> >> On 25.09.17 11:42, bharat gohil wrote: >> >> Hello Wilk, >> >> I had try Ctrl+a three times and 'd' but no dump on the serial >> console. >> >> Its a way to switch to XEN debug console. In case you are using >> minicom, you should press Ctrl+A six times, then you will see the >> line like following: >> (XEN) *** Serial input -> Xen (type 'CTRL-a' three times to >> switch input to DOM0) >> >> Then you can press 'h' for seeing installed key handlers. >> >> But all of this requires XEN to be running somehow. >> >> -- >> *Andrii Anisov* >> >> >> >> >> >> -- >> Regards, >> Bharat Gohil >> Sr.Software Engineer >> bharat.gohil@xxxxxxxxxx <mailto:bharat.gohil@xxxxxxxxxx> <mailto:bharat.gohil@xxxxxxxxxx <mailto:bharat.gohil@xxxxxxxxxx>> >> +919427054633 <tel:%2B919427054633> > > > -- > Julien Grall > > -- Regards, Oleksandr Tyshchenko -- Regards, Bharat Gohil Sr.Software Engineer bharat.gohil@xxxxxxxxxx <mailto:bharat.gohil@xxxxxxxxxx> +919427054633 -- Julien Grall _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |