Re: [Xen-devel] [PATCH 2/2] xen:arm: earlyprintk configuration for R-Car Gen3 boards

[Julien Grall <julien.grall@xxxxxxx>]

Hi,

On 26/07/17 16:25, Andrii Anisov wrote:
> + Stefano as a maintainer.
>
> Dear all,
>
> Any objections on this patch?

Same as patch #1 here.

> On 05.07.17 19:29, Andrii Anisov wrote:
> > From: Andrii Anisov <andrii_anisov@xxxxxxxx>
> >
> > Introduce an earlyprintk configuration for R-Car Gen3 SoC based
> > development
> > boards, like:
> >   - Salvator-X [http://elinux.org/R-Car/Boards/Salvator-X]
> >   - M3ULCB [http://elinux.org/R-Car/Boards/M3SK]
> >   - H3ULCB [http://elinux.org/R-Car/Boards/H3SK]
> >
> > Signed-off-by: Iurii Konovalenko <iurii.konovalenko@xxxxxxxxxxxxxxx>
> > Signed-off-by: Iurii Mykhalskyi <iurii.mykhalskyi@xxxxxxxxxxxxxxx>
> > Signed-off-by: Andrii Anisov <andrii_anisov@xxxxxxxx>
> > ---
> >   docs/misc/arm/early-printk.txt | 1 +
> >   xen/arch/arm/Rules.mk          | 1 +
> >   2 files changed, 2 insertions(+)
> >
> > diff --git a/docs/misc/arm/early-printk.txt
> > b/docs/misc/arm/early-printk.txt
> > index 41b528b..a7a3d94 100644
> > --- a/docs/misc/arm/early-printk.txt
> > +++ b/docs/misc/arm/early-printk.txt
> > @@ -39,6 +39,7 @@ the name of the machine:
> >     - fastmodel: printk on ARM Fastmodel software emulators
> >     - juno: printk with pl011 on Juno platform
> >     - lager: printk with SCIF0 on Renesas R-Car H2 processors
> > +  - rcar3: printk with SCIF2 on Renesas R-Car H3 processors
Please follow alphabetical order

> >     - midway: printk with the pl011 on Calxeda Midway processors
> >     - omap5432: printk with UART3 on TI OMAP5432 processors
> >     - seattle: printk with pl011 for AMD Seattle processor
> > diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
> > index 569a0ba..9c1cb74 100644
> > --- a/xen/arch/arm/Rules.mk
> > +++ b/xen/arch/arm/Rules.mk
> > @@ -34,6 +34,7 @@ EARLY_PRINTK_fastmodel      := pl011,0x1c090000,115200
> >   EARLY_PRINTK_exynos5250     := exynos4210,0x12c20000
> >   EARLY_PRINTK_juno           := pl011,0x7ff80000
> >   EARLY_PRINTK_lager          := scif,0xe6e60000
> > +EARLY_PRINTK_rcar3          := scif,0xe6e88000
Ditto

> >   EARLY_PRINTK_midway         := pl011,0xfff36000
> >   EARLY_PRINTK_omap5432       := 8250,0x48020000,2
> >   EARLY_PRINTK_seattle        := pl011,0xe1010000
Cheers,

--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel