|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v6 16/24] xsplice: Add support for alternatives
From: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
Add support for applying alternative sections within xsplice payload.
At payload load time, apply an alternative sections that are found.
Also we add an test-case exercising a rather useless alternative
(patching a NOP with a NOP) - but it does exercise the code-path.
Signed-off-by: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
---
Cc: Keir Fraser <keir@xxxxxxx>
Cc: Jan Beulich <jbeulich@xxxxxxxx>
Cc: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
v2: Make a new alternative function that does not ASSERT on IRQs and
don't disable IRQs in the code when loading payload.
v4: Include test-case
Include check for size of alternatives and that it is not a 0 size
section.
v6: Add #define INIT to preserve __initness on alternative code.
Double check that alt_instr are only patching payload code.
---
---
xen/arch/x86/Makefile | 2 +-
xen/arch/x86/alternative.c | 35 ++++++++++++++++++++++----------
xen/arch/x86/test/xen_hello_world_func.c | 5 +++++
xen/common/xsplice.c | 34 +++++++++++++++++++++++++++++++
xen/include/asm-x86/alternative.h | 4 ++++
5 files changed, 68 insertions(+), 12 deletions(-)
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index d85287d..08a7b68 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -6,7 +6,7 @@ subdir-y += mm
subdir-$(CONFIG_XENOPROF) += oprofile
subdir-y += x86_64
-obj-bin-y += alternative.init.o
+obj-bin-y += alternative.o
obj-y += apic.o
obj-y += bitops.o
obj-bin-y += bzimage.init.o
diff --git a/xen/arch/x86/alternative.c b/xen/arch/x86/alternative.c
index f735ff8..996e312 100644
--- a/xen/arch/x86/alternative.c
+++ b/xen/arch/x86/alternative.c
@@ -22,13 +22,14 @@
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/nmi.h>
+#include <xen/xsplice.h>
#define MAX_PATCH_LEN (255-1)
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
#ifdef K8_NOP1
-static const unsigned char k8nops[] __initconst = {
+static const unsigned char k8nops[] __INITCONST = {
K8_NOP1,
K8_NOP2,
K8_NOP3,
@@ -52,7 +53,7 @@ static const unsigned char * const k8_nops[ASM_NOP_MAX+1]
__initconstrel = {
#endif
#ifdef P6_NOP1
-static const unsigned char p6nops[] __initconst = {
+static const unsigned char p6nops[] __INITCONST = {
P6_NOP1,
P6_NOP2,
P6_NOP3,
@@ -75,7 +76,7 @@ static const unsigned char * const p6_nops[ASM_NOP_MAX+1]
__initconstrel = {
};
#endif
-static const unsigned char * const *ideal_nops __initdata = k8_nops;
+static const unsigned char * const *ideal_nops __INITDATA = k8_nops;
static int __init mask_nmi_callback(const struct cpu_user_regs *regs, int cpu)
{
@@ -100,7 +101,7 @@ static void __init arch_init_ideal_nops(void)
}
/* Use this to add nops to a buffer, then text_poke the whole buffer. */
-static void __init add_nops(void *insns, unsigned int len)
+static void __INIT add_nops(void *insns, unsigned int len)
{
while ( len > 0 )
{
@@ -114,7 +115,7 @@ static void __init add_nops(void *insns, unsigned int len)
}
/*
- * text_poke_early - Update instructions on a live kernel at boot time
+ * text_poke - Update instructions on a live kernel or non-executed code.
* @addr: address to modify
* @opcode: source of the copy
* @len: length to copy
@@ -125,9 +126,10 @@ static void __init add_nops(void *insns, unsigned int len)
* instructions. And on the local CPU you need to be protected again NMI or MCE
* handlers seeing an inconsistent instruction while you patch.
*
- * This routine is called with local interrupt disabled.
+ * You should run this with interrupts disabled or on code that has never
+ * been executed.
*/
-static void *__init text_poke_early(void *addr, const void *opcode, size_t len)
+static void *__INIT text_poke(void *addr, const void *opcode, size_t len)
{
memcpy(addr, opcode, len);
sync_core();
@@ -142,15 +144,13 @@ static void *__init text_poke_early(void *addr, const
void *opcode, size_t len)
* APs have less capabilities than the boot processor are not handled.
* Tough. Make sure you disable such features by hand.
*/
-static void __init apply_alternatives(struct alt_instr *start, struct
alt_instr *end)
+void __INIT apply_alternatives_nocheck(struct alt_instr *start, struct
alt_instr *end)
{
struct alt_instr *a;
u8 *instr, *replacement;
u8 insnbuf[MAX_PATCH_LEN];
unsigned long cr0 = read_cr0();
- ASSERT(!local_irq_is_enabled());
-
printk(KERN_INFO "alt table %p -> %p\n", start, end);
/* Disable WP to allow application of alternatives to read-only pages. */
@@ -183,13 +183,26 @@ static void __init apply_alternatives(struct alt_instr
*start, struct alt_instr
add_nops(insnbuf + a->replacementlen,
a->instrlen - a->replacementlen);
- text_poke_early(instr, insnbuf, a->instrlen);
+ text_poke(instr, insnbuf, a->instrlen);
}
/* Reinstate WP. */
write_cr0(cr0);
}
+#undef __INIT
+#undef __INITCONST
+#undef __INITDATA
+/*
+ * This routine is called with local interrupt disabled and used during
+ * bootup.
+ */
+void __init apply_alternatives(struct alt_instr *start, struct alt_instr *end)
+{
+ ASSERT(!local_irq_is_enabled());
+ apply_alternatives_nocheck(start, end);
+}
+
void __init alternative_instructions(void)
{
nmi_callback_t *saved_nmi_callback;
diff --git a/xen/arch/x86/test/xen_hello_world_func.c
b/xen/arch/x86/test/xen_hello_world_func.c
index 7e239ca..55e84ac 100644
--- a/xen/arch/x86/test/xen_hello_world_func.c
+++ b/xen/arch/x86/test/xen_hello_world_func.c
@@ -3,6 +3,9 @@
*
*/
+#include <asm/alternative.h>
+#include <asm/nops.h>
+#include <asm/uaccess.h>
#include <xen/types.h>
static unsigned long *non_canonical_addr = (unsigned long *)(1UL<<48);
@@ -12,6 +15,8 @@ const char *xen_hello_world(void)
{
unsigned long tmp = 0xdeadbeef;
int rc;
+
+ alternative(ASM_NOP1, ASM_NOP1, X86_FEATURE_NX);
/*
* Any BUG, or WARN_ON will contain symbol and payload name. Furthermore
* exceptions will be caught and processed properly.
diff --git a/xen/common/xsplice.c b/xen/common/xsplice.c
index 31ddd5d..fea184c 100644
--- a/xen/common/xsplice.c
+++ b/xen/common/xsplice.c
@@ -526,6 +526,39 @@ static int prepare_payload(struct payload *payload,
}
#ifdef CONFIG_X86
+ sec = xsplice_elf_sec_by_name(elf, ".altinstructions");
+ if ( sec )
+ {
+ struct alt_instr *a, *start, *end;
+
+ if ( !sec->sec->sh_size ||
+ (sec->sec->sh_size % sizeof(*a)) )
+ {
+ dprintk(XENLOG_DEBUG, XSPLICE "%s: Wrong size of .alt_instr
(exp:%lu vs %lu)!\n",
+ elf->name, sizeof(*a),
+ sec->sec->sh_size);
+ return -EINVAL;
+ }
+
+ start = (struct alt_instr *)sec->load_addr;
+ end = (struct alt_instr *)(sec->load_addr + sec->sec->sh_size);
+
+ for ( a = start; a < end; a++ )
+ {
+ unsigned long instr = (unsigned long)(&a->instr_offset +
a->instr_offset);
+ unsigned long replacement = (unsigned long)(&a->repl_offset +
a->repl_offset);
+
+ if ( (instr < region->start && instr >= region->end) ||
+ (replacement < region->start && replacement >= region->end) )
+ {
+ dprintk(XENLOG_DEBUG, XSPLICE "%s Alt patching outside
payload: 0x%lx!\n",
+ elf->name, instr);
+ return -EINVAL;
+ }
+ }
+ apply_alternatives_nocheck(start, end);
+ }
+
sec = xsplice_elf_sec_by_name(elf, ".ex_table");
if ( sec )
{
@@ -548,6 +581,7 @@ static int prepare_payload(struct payload *payload,
region->ex = (const struct exception_table_entry *)s;
region->ex_end = (const struct exception_table_entry *)e;
}
+
#endif
return 0;
diff --git a/xen/include/asm-x86/alternative.h
b/xen/include/asm-x86/alternative.h
index 1056630..bce959f 100644
--- a/xen/include/asm-x86/alternative.h
+++ b/xen/include/asm-x86/alternative.h
@@ -23,6 +23,10 @@ struct alt_instr {
u8 replacementlen; /* length of new instruction, <= instrlen */
};
+/* Similar to apply_alternatives except it can be run with IRQs enabled. */
+extern void apply_alternatives_nocheck(struct alt_instr *start,
+ struct alt_instr *end);
+extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
extern void alternative_instructions(void);
#define OLDINSTR(oldinstr) "661:\n\t" oldinstr "\n662:\n"
--
2.5.0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |