Re: [Xen-devel] Xen on Seattle

[Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>]

On Wed, 10 Sep 2014, Suravee Suthikulanit wrote:
> On 9/10/2014 6:00 PM, Julien Grall wrote:
> > Hi Suravee,
> > 
> > On 10/09/14 15:38, Suravee Suthikulanit wrote:
> > > .....
> > > (XEN) DOM0: NET: Registered protocol family 10
> > > (XEN) DOM0: sit: IPv6 over IPv4 tunneling driver
> > > (XEN) DOM0: NET: Registered protocol family 17
> > > (XEN) DOM0: Bridge firewalling registered
> > > (XEN) DOM0: 9pnet: Installing 9P2000 support
> > > (XEN) DOM0: NET: Registered protocol family 37
> > > (XEN) DOM0: bootconsole [uart0] disabled
> > > 
> > > Please see attachment for full boot log. I am still working on trying to
> > > get to Dom0 console.
> > 
> > Xen is providing a tiny UART emulation which only handle write. It looks
> > like you kernel is using it. Did add "console=hvc0" on your kernel
> > command line?
> > 
> > This will allow DOM0 to use the paravirtualised console.
> > 
> > Regards,
> > 
> 
> Ah ok, this got the console out now. I still need to clean up a bit. But it
> looks to be in good shape. Thanks for the pointer ;)

Cool!
I wouldn't wait too long before sending the patches for Xen: the feature
freeze is in 2 weeks!


> Suravee
> 
> ......
> (XEN) DOM0: bootconsole [uart0] disabled
> bootconsole [uart0] disabled
> Btrfs loaded
> drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ATA-8: Corsair CSSD-F200GB2, 0.2, max UDMA/133
> ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      Corsair CSSD-F20 0.2  PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
>  sda: sda1 sda2 sda3 sda4
> sd 0:0:0:0: [sda] Attached SCSI disk
> ata2: SATA link down (SStatus 0 SControl 300)
> ata3: SATA link down (SStatus 0 SControl 300)
> ata4: SATA link down (SStatus 0 SControl 300)
> ata5: SATA link down (SStatus 0 SControl 300)
> ata6: SATA link down (SStatus 0 SControl 300)
> ata7: SATA link down (SStatus 0 SControl 300)
> ata8: SATA link down (SStatus 0 SControl 300)
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs (sda2): mounted filesystem with ordered data mode
> VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
> devtmpfs: mounted
> Freeing unused kernel memory: 304K (ffff8000008f8000 - ffff800000944000)
> STYX_INFO: ==== Styx Kernel Info ====
> STYX_INFO:  Compile Info:
> STYX_INFO:    UTS release : 3.17.0-rc4-styx-xen+
> STYX_INFO:    UTS machine : aarch64
> STYX_INFO:    UTS version : #15 SMP Wed Sep 10 16:54:52 CDT 2014
> STYX_INFO:    Compiled by : Linux version 3.17.0-rc4-styx-xen+
> (ssuthiku@sos-arm-dev) (gcc version 4.8.2 20140110 (prerelease)
> [ibm/gcc-4_8-branch merged from gcc-4_8-branch, revision 205847]
> (Ubuntu/Linaro 4.8.2-13ubuntu1) ) #15 SMP Wed Sep 10 16:54:52 CDT 2014
> 
> STYX_INFO:  Build Info:
> STYX_INFO:  Boot Info:
> STYX_INFO:    Present/Online/Offline CPUs : 1/1/0
> STYX_INFO:  Modules Info:
> STYX_INFO:    CONFIG_ARCH_STYX: Yes
> STYX_INFO:    CONFIG_SERIAL_AMBA_PL011: Yes
> STYX_INFO:    CONFIG_ARM_GIC: Yes
> STYX_INFO:    CONFIG_SATA_AHCI_PLATFORM: Yes
> STYX_INFO:    CONFIG_PCI: Yes
> STYX_INFO:    CONFIG_PCI_MSI: Yes
> STYX_INFO:    CONFIG_PCI_AMD: Yes
> STYX_INFO:    CONFIG_CRYPTO_DEV_CCP: Yes
> STYX_INFO:    CONFIG_CRYPTO_DEV_CCP_DD: Module
> STYX_INFO:    CONFIG_CRYPTO_DEV_CCP_CRYPTO: Module
> STYX_INFO:    CONFIG_AMD_XGBE: Yes
> STYX_INFO:    CONFIG_ARM_SMMU: Yes
> STYX_INFO: ========================================
> random: init urandom read with 28 bits of entropy available
> init: ureadahead main process (94) terminated with status 5
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel