Re: [Xen-devel] Xen on Seattle

[Suravee Suthikulanit <suravee.suthikulpanit@xxxxxxx>]

On 9/10/2014 6:00 PM, Julien Grall wrote:
> Hi Suravee,
>
> On 10/09/14 15:38, Suravee Suthikulanit wrote:
> > .....
> > (XEN) DOM0: NET: Registered protocol family 10
> > (XEN) DOM0: sit: IPv6 over IPv4 tunneling driver
> > (XEN) DOM0: NET: Registered protocol family 17
> > (XEN) DOM0: Bridge firewalling registered
> > (XEN) DOM0: 9pnet: Installing 9P2000 support
> > (XEN) DOM0: NET: Registered protocol family 37
> > (XEN) DOM0: bootconsole [uart0] disabled
> >
> > Please see attachment for full boot log. I am still working on trying to
> > get to Dom0 console.
> Xen is providing a tiny UART emulation which only handle write. It looks
> like you kernel is using it. Did add "console=hvc0" on your kernel
> command line?
>
> This will allow DOM0 to use the paravirtualised console.
>
> Regards,
Ah ok, this got the console out now. I still need to clean up a bit. But 
it looks to be in good shape. Thanks for the pointer ;)
Suravee

......
(XEN) DOM0: bootconsole [uart0] disabled
bootconsole [uart0] disabled
Btrfs loaded
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Corsair CSSD-F200GB2, 0.2, max UDMA/133
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Corsair CSSD-F20 0.2  PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
devtmpfs: mounted
Freeing unused kernel memory: 304K (ffff8000008f8000 - ffff800000944000)
STYX_INFO: ==== Styx Kernel Info ====
STYX_INFO:  Compile Info:
STYX_INFO:    UTS release : 3.17.0-rc4-styx-xen+
STYX_INFO:    UTS machine : aarch64
STYX_INFO:    UTS version : #15 SMP Wed Sep 10 16:54:52 CDT 2014
STYX_INFO:    Compiled by : Linux version 3.17.0-rc4-styx-xen+ 
(ssuthiku@sos-arm-dev) (gcc version 4.8.2 20140110 (prerelease) 
[ibm/gcc-4_8-branch merged from gcc-4_8-branch, revision 205847] 
(Ubuntu/Linaro 4.8.2-13ubuntu1) ) #15 SMP Wed Sep 10 16:54:52 CDT 2014
STYX_INFO:  Build Info:
STYX_INFO:  Boot Info:
STYX_INFO:    Present/Online/Offline CPUs : 1/1/0
STYX_INFO:  Modules Info:
STYX_INFO:    CONFIG_ARCH_STYX: Yes
STYX_INFO:    CONFIG_SERIAL_AMBA_PL011: Yes
STYX_INFO:    CONFIG_ARM_GIC: Yes
STYX_INFO:    CONFIG_SATA_AHCI_PLATFORM: Yes
STYX_INFO:    CONFIG_PCI: Yes
STYX_INFO:    CONFIG_PCI_MSI: Yes
STYX_INFO:    CONFIG_PCI_AMD: Yes
STYX_INFO:    CONFIG_CRYPTO_DEV_CCP: Yes
STYX_INFO:    CONFIG_CRYPTO_DEV_CCP_DD: Module
STYX_INFO:    CONFIG_CRYPTO_DEV_CCP_CRYPTO: Module
STYX_INFO:    CONFIG_AMD_XGBE: Yes
STYX_INFO:    CONFIG_ARM_SMMU: Yes
STYX_INFO: ========================================
random: init urandom read with 28 bits of entropy available
init: ureadahead main process (94) terminated with status 5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel