[Xen-devel] [PATCH] xen/arm: debug-exynos4210: Remove early_uart_init

[Julien Grall <julien.grall@xxxxxxxxxx>]

The function early_uart_init contains specific initialization for the
Arndale Board 5250.

Usually U-boot as already setup the UART correctly (ie. clock, baud rate...)
so we don't have to do again.

Futhermore, this code won't work on new platform such as the Arndale Octa.

Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
Cc: HyonYoung Choi <commani@xxxxxxxxx>
Cc: Meng Xu <xumengpanda@xxxxxxxxx>
---
 xen/arch/arm/Rules.mk                   |    1 -
 xen/arch/arm/arm32/debug-exynos4210.inc |   32 -------------------------------
 2 files changed, 33 deletions(-)

diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index c551afb..8d5624b 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -53,7 +53,6 @@ EARLY_UART_BASE_ADDRESS := 0x1c090000
 endif
 ifeq ($(CONFIG_EARLY_PRINTK), exynos5250)
 EARLY_PRINTK_INC := exynos4210
-EARLY_PRINTK_INIT_UART := y
 EARLY_PRINTK_BAUD := 115200
 EARLY_UART_BASE_ADDRESS := 0x12c20000
 endif
diff --git a/xen/arch/arm/arm32/debug-exynos4210.inc 
b/xen/arch/arm/arm32/debug-exynos4210.inc
index 39f2db3..752942d 100644
--- a/xen/arch/arm/arm32/debug-exynos4210.inc
+++ b/xen/arch/arm/arm32/debug-exynos4210.inc
@@ -18,38 +18,6 @@
 
 #include <asm/exynos4210-uart.h>
 
-/* Exynos 5 UART initialization
- * rb: register which contains the UART base address
- * rc: scratch register 1
- * rd: scratch register 2 */
-.macro early_uart_init rb rc rd
-        /* init clock */
-        ldr   \rc, =0x10020000
-        /* select MPLL (800MHz) source clock */
-        ldr   \rd, [\rc, #0x250]
-        and   \rd, \rd, #(~(0xf<<8))
-        orr   \rd, \rd, #(0x6<<8)
-        str   \rd, [\rc, #0x250]
-        /* ratio 800/(7+1) */
-        ldr   \rd, [\rc, #0x558]
-        and   \rd, \rd, #(~(0xf<<8))
-        orr   \rd, \rd, #(0x7<<8)
-        str   \rd, [\rc, #0x558]
-
-        mov   \rc, #(100000000 / EARLY_PRINTK_BAUD % 16)
-        str   \rc, [\rb, #UFRACVAL]     /* -> UFRACVAL (Baud divisor fraction) 
*/
-        mov   \rc, #(100000000 / EARLY_PRINTK_BAUD / 16 - 1)
-        str   \rc, [\rb, #UBRDIV]       /* -> UBRDIV (Baud divisor integer) */
-        mov   \rc, #3                   /* 8n1 */
-        str   \rc, [\rb, #ULCON]        /* -> (Line control) */
-        ldr   \rc, =UCON_TX_IRQ         /* TX IRQMODE */
-        str   \rc, [\rb, #UCON]         /* -> (Control Register) */
-        mov   \rc, #0x0
-        str   \rc, [\rb, #UFCON]        /* disable FIFO */
-        mov   \rc, #0x0
-        str   \rc, [\rb, #UMCON]        /* no auto flow control */
-.endm
-
 /* Exynos 5 UART wait UART to be ready to transmit
  * rb: register which contains the UART base address
  * rc: scratch register */
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel