|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v2 14/16] xen/arm: IRQ: Replace {request, setup}_dt_irq by {request, setup}_irq
Now that irq_desc stores the type of the IRQ (e.g level/edge,...), we don't
need anymore to use specific IRQ function for ARM.
Also replace every call to dt_device_get_irq by platform_get_irq which is
a wrapper to this function and setup the IRQ type correctly.
Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
Cc: Keir Fraser <keir@xxxxxxx>
---
Changes in v2:
- Patch added
---
xen/arch/arm/gic.c | 12 ++++++------
xen/arch/arm/irq.c | 23 +++++++++++------------
xen/arch/arm/time.c | 28 ++++++++++++++--------------
xen/drivers/char/exynos4210-uart.c | 14 +++++++-------
xen/drivers/char/ns16550.c | 17 +++--------------
xen/drivers/char/omap-uart.c | 14 +++++++-------
xen/drivers/char/pl011.c | 17 +++++++++--------
xen/include/asm-arm/irq.h | 5 -----
8 files changed, 57 insertions(+), 73 deletions(-)
diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index ec2994e..97b0153 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -47,7 +47,7 @@ static struct {
paddr_t hbase; /* Address of virtual interface registers */
paddr_t vbase; /* Address of virtual cpu interface registers */
unsigned int lines; /* Number of interrupts (SPIs + PPIs + SGIs) */
- struct dt_irq maintenance; /* IRQ maintenance */
+ unsigned int maintenance_irq; /* IRQ maintenance */
unsigned int cpus;
spinlock_t lock;
} gic;
@@ -439,8 +439,8 @@ void __init gic_init(void)
if ( res || !gic.vbase || (gic.vbase & ~PAGE_MASK) )
panic("GIC: Cannot find a valid address for the virtual CPU");
- res = dt_device_get_irq(node, 0, &gic.maintenance);
- if ( res )
+ gic.maintenance_irq = platform_get_irq(node, 0);
+ if ( !gic.maintenance_irq )
panic("GIC: Cannot find the maintenance IRQ");
/* Set the GIC as the primary interrupt controller */
@@ -455,7 +455,7 @@ void __init gic_init(void)
" gic_vcpu_addr=%"PRIpaddr"\n"
" gic_maintenance_irq=%u\n",
gic.dbase, gic.cbase, gic.hbase, gic.vbase,
- gic.maintenance.irq);
+ gic.maintenance_irq);
if ( (gic.dbase & ~PAGE_MASK) || (gic.cbase & ~PAGE_MASK) ||
(gic.hbase & ~PAGE_MASK) || (gic.vbase & ~PAGE_MASK) )
@@ -892,8 +892,8 @@ void gic_dump_info(struct vcpu *v)
void __cpuinit init_maintenance_interrupt(void)
{
- request_dt_irq(&gic.maintenance, maintenance_interrupt,
- "irq-maintenance", NULL);
+ request_irq(gic.maintenance_irq, maintenance_interrupt,
+ "irq-maintenance", NULL);
}
/*
diff --git a/xen/arch/arm/irq.c b/xen/arch/arm/irq.c
index a56ccf2..49717f8 100644
--- a/xen/arch/arm/irq.c
+++ b/xen/arch/arm/irq.c
@@ -114,9 +114,9 @@ static inline struct domain *irq_get_domain(struct irq_desc
*desc)
return desc->action->dev_id;
}
-int request_dt_irq(const struct dt_irq *irq,
- void (*handler)(int, void *, struct cpu_user_regs *),
- const char *devname, void *dev_id)
+int request_irq(unsigned int irq,
+ void (*handler)(int, void *, struct cpu_user_regs *),
+ const char *devname, void *dev_id)
{
struct irqaction *action;
int retval;
@@ -127,13 +127,13 @@ int request_dt_irq(const struct dt_irq *irq,
* which interrupt is which (messes up the interrupt freeing
* logic etc).
*/
- if (irq->irq >= nr_irqs)
+ if ( irq >= nr_irqs )
return -EINVAL;
- if (!handler)
+ if ( !handler )
return -EINVAL;
action = xmalloc(struct irqaction);
- if (!action)
+ if ( !action )
return -ENOMEM;
action->handler = handler;
@@ -141,8 +141,8 @@ int request_dt_irq(const struct dt_irq *irq,
action->dev_id = dev_id;
action->free_on_release = 1;
- retval = setup_dt_irq(irq, action);
- if (retval)
+ retval = setup_irq(irq, action);
+ if ( retval )
xfree(action);
return retval;
@@ -249,14 +249,14 @@ static int __setup_irq(struct irq_desc *desc, struct
irqaction *new)
return 0;
}
-int setup_dt_irq(const struct dt_irq *irq, struct irqaction *new)
+int setup_irq(unsigned int irq, struct irqaction *new)
{
int rc;
unsigned long flags;
struct irq_desc *desc;
bool_t disabled = 0;
- desc = irq_to_desc(irq->irq);
+ desc = irq_to_desc(irq);
spin_lock_irqsave(&desc->lock, flags);
@@ -266,7 +266,7 @@ int setup_dt_irq(const struct dt_irq *irq, struct irqaction
*new)
spin_unlock_irqrestore(&desc->lock, flags);
printk(XENLOG_ERR "ERROR: IRQ %u is already in use by the domain %u\n",
- irq->irq, d->domain_id);
+ irq, d->domain_id);
return -EBUSY;
}
@@ -286,7 +286,6 @@ int setup_dt_irq(const struct dt_irq *irq, struct irqaction
*new)
* TODO: Handle case where SPI is setup on different CPU than
* the targeted CPU and the priority.
*/
- desc->arch.type = irq->type;
gic_route_irq_to_xen(desc, cpumask_of(smp_processor_id()),
GIC_PRI_IRQ);
desc->handler->startup(desc);
diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
index ce96337..c4adfe4 100644
--- a/xen/arch/arm/time.c
+++ b/xen/arch/arm/time.c
@@ -48,13 +48,13 @@ uint64_t __read_mostly boot_count;
* register-mapped time source in the SoC. */
unsigned long __read_mostly cpu_khz; /* CPU clock frequency in kHz. */
-static struct dt_irq timer_irq[MAX_TIMER_PPI];
+static int timer_irq[MAX_TIMER_PPI];
unsigned int timer_get_irq(enum timer_ppi ppi)
{
ASSERT(ppi >= TIMER_PHYS_SECURE_PPI && ppi < MAX_TIMER_PPI);
- return timer_irq[ppi].irq;
+ return timer_irq[ppi];
}
/*static inline*/ s_time_t ticks_to_ns(uint64_t ticks)
@@ -120,15 +120,15 @@ int __init init_xen_time(void)
/* Retrieve all IRQs for the timer */
for ( i = TIMER_PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++ )
{
- res = dt_device_get_irq(dev, i, &timer_irq[i]);
- if ( res )
+ timer_irq[i] = platform_get_irq(dev, i);
+ if ( !timer_irq[i] )
panic("Timer: Unable to retrieve IRQ %u from the device tree", i);
}
printk("Generic Timer IRQ: phys=%u hyp=%u virt=%u\n",
- timer_irq[TIMER_PHYS_NONSECURE_PPI].irq,
- timer_irq[TIMER_HYP_PPI].irq,
- timer_irq[TIMER_VIRT_PPI].irq);
+ timer_irq[TIMER_PHYS_NONSECURE_PPI],
+ timer_irq[TIMER_HYP_PPI],
+ timer_irq[TIMER_VIRT_PPI]);
res = platform_init_time();
if ( res )
@@ -192,7 +192,7 @@ int reprogram_timer(s_time_t timeout)
/* Handle the firing timer */
static void timer_interrupt(int irq, void *dev_id, struct cpu_user_regs *regs)
{
- if ( irq == (timer_irq[TIMER_HYP_PPI].irq) &&
+ if ( irq == (timer_irq[TIMER_HYP_PPI]) &&
READ_SYSREG32(CNTHP_CTL_EL2) & CNTx_CTL_PENDING )
{
/* Signal the generic timer code to do its work */
@@ -201,7 +201,7 @@ static void timer_interrupt(int irq, void *dev_id, struct
cpu_user_regs *regs)
WRITE_SYSREG32(0, CNTHP_CTL_EL2);
}
- if ( irq == (timer_irq[TIMER_PHYS_NONSECURE_PPI].irq) &&
+ if ( irq == (timer_irq[TIMER_PHYS_NONSECURE_PPI]) &&
READ_SYSREG32(CNTP_CTL_EL0) & CNTx_CTL_PENDING )
{
/* Signal the generic timer code to do its work */
@@ -235,12 +235,12 @@ void __cpuinit init_timer_interrupt(void)
WRITE_SYSREG32(0, CNTHP_CTL_EL2); /* Hypervisor's timer disabled */
isb();
- request_dt_irq(&timer_irq[TIMER_HYP_PPI], timer_interrupt,
- "hyptimer", NULL);
- request_dt_irq(&timer_irq[TIMER_VIRT_PPI], vtimer_interrupt,
+ request_irq(timer_irq[TIMER_HYP_PPI], timer_interrupt,
+ "hyptimer", NULL);
+ request_irq(timer_irq[TIMER_VIRT_PPI], vtimer_interrupt,
"virtimer", NULL);
- request_dt_irq(&timer_irq[TIMER_PHYS_NONSECURE_PPI], timer_interrupt,
- "phytimer", NULL);
+ request_irq(timer_irq[TIMER_PHYS_NONSECURE_PPI], timer_interrupt,
+ "phytimer", NULL);
}
/* Wait a set number of microseconds */
diff --git a/xen/drivers/char/exynos4210-uart.c
b/xen/drivers/char/exynos4210-uart.c
index 370539c..0f77300 100644
--- a/xen/drivers/char/exynos4210-uart.c
+++ b/xen/drivers/char/exynos4210-uart.c
@@ -30,7 +30,7 @@
static struct exynos4210_uart {
unsigned int baud, clock_hz, data_bits, parity, stop_bits;
- struct dt_irq irq;
+ unsigned int irq;
void *regs;
struct irqaction irqaction;
struct vuart_info vuart;
@@ -197,9 +197,9 @@ static void __init exynos4210_uart_init_postirq(struct
serial_port *port)
uart->irqaction.name = "exynos4210_uart";
uart->irqaction.dev_id = port;
- if ( (rc = setup_dt_irq(&uart->irq, &uart->irqaction)) != 0 )
+ if ( (rc = setup_irq(uart->irq, &uart->irqaction)) != 0 )
dprintk(XENLOG_ERR, "Failed to allocated exynos4210_uart IRQ %d\n",
- uart->irq.irq);
+ uart->irq);
/* Unmask interrupts */
exynos4210_write(uart, UINTM, ~UINTM_ALLI);
@@ -272,7 +272,7 @@ static int __init exynos4210_uart_irq(struct serial_port
*port)
{
struct exynos4210_uart *uart = port->uart;
- return uart->irq.irq;
+ return uart->irq;
}
static const struct vuart_info *exynos4210_vuart_info(struct serial_port *port)
@@ -323,11 +323,11 @@ static int __init exynos4210_uart_init(struct
dt_device_node *dev,
return res;
}
- res = dt_device_get_irq(dev, 0, &uart->irq);
- if ( res )
+ uart->irq = platform_get_irq(dev, 0);
+ if ( !uart->irq )
{
printk("exynos4210: Unable to retrieve the IRQ\n");
- return res;
+ return -EINVAL;
}
uart->regs = ioremap_nocache(addr, size);
diff --git a/xen/drivers/char/ns16550.c b/xen/drivers/char/ns16550.c
index cc86921..78e3aab 100644
--- a/xen/drivers/char/ns16550.c
+++ b/xen/drivers/char/ns16550.c
@@ -76,9 +76,6 @@ static struct ns16550 {
u8 bar_idx;
bool_t enable_ro; /* Make MMIO devices read only to Dom0 */
#endif
-#ifdef HAS_DEVICE_TREE
- struct dt_irq dt_irq;
-#endif
} ns16550_com[2] = { { 0 } };
struct ns16550_config_mmio {
@@ -589,13 +586,8 @@ static void __init ns16550_init_postirq(struct serial_port
*port)
uart->irqaction.handler = ns16550_interrupt;
uart->irqaction.name = "ns16550";
uart->irqaction.dev_id = port;
-#ifdef HAS_DEVICE_TREE
- if ( (rc = setup_dt_irq(&uart->dt_irq, &uart->irqaction)) != 0 )
- printk("ERROR: Failed to allocate ns16550 DT IRQ.\n");
-#else
if ( (rc = setup_irq(uart->irq, &uart->irqaction)) != 0 )
printk("ERROR: Failed to allocate ns16550 IRQ %d\n", uart->irq);
-#endif
}
ns16550_setup_postirq(uart);
@@ -1147,12 +1139,9 @@ static int __init ns16550_uart_dt_init(struct
dt_device_node *dev,
if ( uart->reg_width != 1 && uart->reg_width != 4 )
return -EINVAL;
- res = dt_device_get_irq(dev, 0, &uart->dt_irq);
- if ( res )
- return res;
-
- /* The common bit of the driver mostly deals with irq not dt_irq. */
- uart->irq = uart->dt_irq.irq;
+ uart->irq = platform_get_irq(dev, 0);
+ if ( !uart->irq )
+ return -EINVAL;
uart->dw_usr_bsy = dt_device_is_compatible(dev, "snps,dw-apb-uart");
diff --git a/xen/drivers/char/omap-uart.c b/xen/drivers/char/omap-uart.c
index b8da509..c2d513b 100644
--- a/xen/drivers/char/omap-uart.c
+++ b/xen/drivers/char/omap-uart.c
@@ -30,7 +30,7 @@
static struct omap_uart {
u32 baud, clock_hz, data_bits, parity, stop_bits, fifo_size;
- struct dt_irq irq;
+ unsigned int irq;
char __iomem *regs;
struct irqaction irqaction;
struct vuart_info vuart;
@@ -205,10 +205,10 @@ static void __init omap_uart_init_postirq(struct
serial_port *port)
uart->irqaction.name = "omap_uart";
uart->irqaction.dev_id = port;
- if ( setup_dt_irq(&uart->irq, &uart->irqaction) != 0 )
+ if ( setup_irq(uart->irq, &uart->irqaction) != 0 )
{
dprintk(XENLOG_ERR, "Failed to allocated omap_uart IRQ %d\n",
- uart->irq.irq);
+ uart->irq);
return;
}
@@ -259,7 +259,7 @@ static int __init omap_uart_irq(struct serial_port *port)
{
struct omap_uart *uart = port->uart;
- return ((uart->irq.irq > 0) ? uart->irq.irq : -1);
+ return ((uart->irq > 0) ? uart->irq : -1);
}
static const struct vuart_info *omap_vuart_info(struct serial_port *port)
@@ -317,11 +317,11 @@ static int __init omap_uart_init(struct dt_device_node
*dev,
return res;
}
- res = dt_device_get_irq(dev, 0, &uart->irq);
- if ( res )
+ uart->irq = platform_get_irq(dev, 0);
+ if ( !uart->irq )
{
printk("omap-uart: Unable to retrieve the IRQ\n");
- return res;
+ return -EINVAL;
}
uart->regs = ioremap_nocache(addr, size);
diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
index 459e686..acf2bbc 100644
--- a/xen/drivers/char/pl011.c
+++ b/xen/drivers/char/pl011.c
@@ -32,7 +32,7 @@
static struct pl011 {
unsigned int baud, clock_hz, data_bits, parity, stop_bits;
- struct dt_irq irq;
+ unsigned int irq;
void __iomem *regs;
/* UART with IRQ line: interrupt-driven I/O. */
struct irqaction irqaction;
@@ -132,13 +132,13 @@ static void __init pl011_init_postirq(struct serial_port
*port)
struct pl011 *uart = port->uart;
int rc;
- if ( uart->irq.irq > 0 )
+ if ( uart->irq > 0 )
{
uart->irqaction.handler = pl011_interrupt;
uart->irqaction.name = "pl011";
uart->irqaction.dev_id = port;
- if ( (rc = setup_dt_irq(&uart->irq, &uart->irqaction)) != 0 )
- printk("ERROR: Failed to allocate pl011 IRQ %d\n", uart->irq.irq);
+ if ( (rc = setup_irq(uart->irq, &uart->irqaction)) != 0 )
+ printk("ERROR: Failed to allocate pl011 IRQ %d\n", uart->irq);
}
/* Clear pending error interrupts */
@@ -186,7 +186,8 @@ static int pl011_getc(struct serial_port *port, char *pc)
static int __init pl011_irq(struct serial_port *port)
{
struct pl011 *uart = port->uart;
- return ((uart->irq.irq > 0) ? uart->irq.irq : -1);
+
+ return ((uart->irq > 0) ? uart->irq : -1);
}
static const struct vuart_info *pl011_vuart(struct serial_port *port)
@@ -239,11 +240,11 @@ static int __init pl011_uart_init(struct dt_device_node
*dev,
return res;
}
- res = dt_device_get_irq(dev, 0, &uart->irq);
- if ( res )
+ uart->irq = platform_get_irq(dev, 0);
+ if ( !uart->irq )
{
printk("pl011: Unable to retrieve the IRQ\n");
- return res;
+ return -EINVAL;
}
uart->regs = ioremap_nocache(addr, size);
diff --git a/xen/include/asm-arm/irq.h b/xen/include/asm-arm/irq.h
index 107c13a..ad2cc18 100644
--- a/xen/include/asm-arm/irq.h
+++ b/xen/include/asm-arm/irq.h
@@ -40,11 +40,6 @@ void do_IRQ(struct cpu_user_regs *regs, unsigned int irq,
int is_fiq);
void init_IRQ(void);
void init_secondary_IRQ(void);
-int request_dt_irq(const struct dt_irq *irq,
- void (*handler)(int, void *, struct cpu_user_regs *),
- const char *devname, void *dev_id);
-int setup_dt_irq(const struct dt_irq *irq, struct irqaction *new);
-
int route_dt_irq_to_guest(struct domain *d, const struct dt_irq *irq,
const char *devname);
unsigned int platform_get_irq(const struct dt_device_node *device,
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |