[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Xen-unstable Linux 3.14-rc3 and 3.13 Network troubles "bisected"



Wednesday, March 26, 2014, 6:46:06 PM, you wrote:

> Re-send shortened version...

>> -----Original Message-----
>> From: Sander Eikelenboom [mailto:linux@xxxxxxxxxxxxxx]
>> Sent: 26 March 2014 16:54
>> To: Paul Durrant
>> Cc: Wei Liu; annie li; Zoltan Kiss; xen-devel@xxxxxxxxxxxxx; Ian Campbell; 
>> linux-
>> kernel; netdev@xxxxxxxxxxxxxxx
>> Subject: Re: [Xen-devel] Xen-unstable Linux 3.14-rc3 and 3.13 Network
>> troubles "bisected"
>> 
> [snip]
>> >>
>> >> - When processing an SKB we end up in "xenvif_gop_frag_copy" while
>> prod
>> >> == cons ... but we still have bytes and size left ..
>> >> - start_new_rx_buffer() has returned true ..
>> >> - so we end up in get_next_rx_buffer
>> >> - this does a RING_GET_REQUEST and ups cons ..
>> >> - and we end up with a bad grant reference.
>> >>
>> >> Sometimes we are saved by the bell .. since additional slots have become
>> >> free (you see cons become > prod in "get_next_rx_buffer" but shortly
>> after
>> >> that prod is increased ..
>> >> just in time to not cause a overrun).
>> >>
>> 
>> > Ah, but hang on... There's a BUG_ON meta_slots_used >
>> max_slots_needed, so if we are overflowing the worst-case calculation then
>> why is that BUG_ON not firing?
>> 
>> You mean:
>>                 sco = (struct skb_cb_overlay *)skb->cb;
>>                 sco->meta_slots_used = xenvif_gop_skb(skb, &npo);
>>                 BUG_ON(sco->meta_slots_used > max_slots_needed);
>> 
>> in "get_next_rx_buffer" ?
>> 

> That code excerpt is from net_rx_action(),isn't it?

Yes

>> I don't know .. at least now it doesn't crash dom0 and therefore not my
>> complete machine and since tcp is recovering from a failed packet  :-)
>> 

> Well, if the code calculating max_slots_needed were underestimating then the 
> BUG_ON() should fire. If it is not firing in your case then this suggests 
> your problem lies elsewhere, or that meta_slots_used is not equal to the 
> number of ring slots consumed.

It's seem to be the last ..

[ 1157.188908] vif vif-7-0 vif7.0: ?!? xenvif_gop_skb Me here 5 
npo->meta_prod:40 old_meta_prod:36 vif->rx.sring->req_prod:2105867 
vif->rx.req_cons:2105868 meta->gso_type:1 meta->gso_size:1448 nr_frags:1 
req->gref:657 req->id:7 estimated_slots_needed:4 j(data):1 
reserved_slots_left:-1    used in funcstart: 0 + 1 .. used_dataloop:1 .. 
used_fragloop:3
[ 1157.244975] vif vif-7-0 vif7.0: ?!? xenvif_rx_action me here 2 ..  
vif->rx.sring->req_prod:2105867 vif->rx.req_cons:2105868 sco->meta_slots_used:4 
max_upped_gso:1 skb_is_gso(skb):1 max_slots_needed:4 j:6 is_gso:1 nr_frags:1 
firstpart:1 secondpart:2 reserved_slots_left:-1

net_rx_action() calculated we would need 4 slots .. and sco->meta_slots_used == 
4 when we return so it doesn't trigger you BUG_ON ..

The 4 slots we calculated are:
  1 slot for the data part: DIV_ROUND_UP(offset_in_page(skb->data) + 
skb_headlen(skb), PAGE_SIZE)
  2 slots for the single frag in this SKB from: DIV_ROUND_UP(size, PAGE_SIZE)
  1 slot since GSO

In the debug code i annotated all cons++, and the code uses 1 slot to process 
the data from the SKB as expected but uses 3 slots in the frag chopping loop.
And when it reaches the state  were cons > prod it is always in 
"get_next_rx_buffer".

>> But probably because "npo->copy_prod++" seems to be used for the frags ..
>> and it isn't added to  npo->meta_prod ?
>> 

> meta_slots_used is calculated as the value of meta_prod at return (from 
> xenvif_gop_skb()) minus the value on entry ,
> and if you look back up the code then you can see that meta_prod is 
> incremented every time RING_GET_REQUEST() is evaluated.
> So, we must be consuming a slot without evaluating RING_GET_REQUEST() and I 
> think that's exactly what's happening...
> Right at the bottom of xenvif_gop_frag_copy() req_cons is simply incremented 
> in the case of a GSO. So the BUG_ON() is indeed off by one.

That is probably only done on first iteration / frag ?
Because i don't see my warn there trigger .. but it could be that's because at 
that moment we still have cons <= prod.


>   Paul




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.