[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] OSSTest: .../osstest/debian-installer/amd64/current-wheezy/initrd.gz: No such file or directory
Hi, I'm trying (again) to setup OSSTest for me in standalone mode (again because I did it and succeeded once, but it was a while back and I'd like to restart from scratch). With the config file pasted at the end of this e-mail I managed to get past standalone-reset: dariof@hoopak:~/osstest.git$ ./standalone-reset ok. Also: dariof@hoopak:~/osstest.git$ ls /usr/groups/netboot//dariof/osstest/ debian-installer/ tmp/ dariof@hoopak:~/osstest.git$ ls /usr/groups/netboot//dariof/osstest/tmp/ ultralisk--initrd.gz dariof@hoopak:~/osstest.git$ ls /usr/groups/netboot//dariof/osstest/debian-installer/ amd64/ armhf/ i386/ dariof@hoopak:~/osstest.git$ ls /usr/groups/netboot//dariof/osstest/debian-installer/amd64 -l total 4 drwxr-sr-x 2 dariof xendev 4096 ott 30 18:27 2013-10-30-wheezy/ lrwxrwxrwx 1 dariof xendev 17 ott 30 18:27 current -> 2013-10-30-wheezy/ However, trying to run a ts-host-insall in a way that used to work for me, here's what I get: dariof@hoopak:~/osstest.git$ OSSTEST_JOB=test-amd64-amd64-xl ./ts-host-install host=ultralisk arch=amd64 2013-10-30 18:50:47 Z starting standalone.test-amd64-amd64-xl 2013-10-30 18:50:47 Z setting all_hostflags=arch-amd64,arch-xen-amd64,suite-wheezy,purpose-test 2013-10-30 18:50:47 Z setting arch=amd64 2013-10-30 18:50:47 Z setting buildjob=build-amd64 2013-10-30 18:50:47 Z setting debian_arch=amd64 2013-10-30 18:50:47 Z setting debian_kernkind=pvops 2013-10-30 18:50:47 Z setting kernbuildjob=build-amd64-pvops 2013-10-30 18:50:47 Z setting kernkind=pvops 2013-10-30 18:50:47 Z setting toolstack=xl 2013-10-30 18:50:47 Z setting xenbuildjob=build-amd64 2013-10-30 18:50:47 Z host: selected ultralisk <unknown-ether> 10.80.228.103 2013-10-30 18:50:47 Z power: setting 0 for ultralisk Executing snmpset -v1 -c private 10.80.16.136 .1.3.6.1.4.1.318.1.1.12.3.3.1.1.4.3 i 2 Executing snmpset -v1 -c private 10.80.16.136 .1.3.6.1.4.1.318.1.1.12.3.3.1.1.4.2 i 2 2013-10-30 18:50:50 Z read /home/dariof/.ssh/authorized_keys ok. 2013-10-30 18:50:50 Z read /home/dariof/.ssh/id_dsa.pub absent. 2013-10-30 18:50:50 Z read /home/dariof/.ssh/id_rsa.pub ok. 2013-10-30 18:50:50 Z read id_rsa_osstest.pub ok. 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_authkeys 2013-10-30 18:50:50 Z read overlay-local/etc/ssh/ssh_host_rsa_key.pub ok. 2013-10-30 18:50:50 Z adding host key for ultralisk.uk.xensource.com,ultralisk,10.80.228.103 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_known_hosts 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_overlay.tar 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_overlay-local.tar 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_X2flibX2fpartmanX2finitX2edX2f000override-parted-devices 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_early_command-0 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_X2flibX2fpartmanX2finitX2edX2f25erase-other-disks 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_early_command-1 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_late_command-0 2013-10-30 18:50:50 Z wrote /home/dariof/public_html/osstest/ultralisk_preseed 2013-10-30 18:50:50 Z warning: no firmware cpio found for firmware-bnx2 at /usr/groups/netboot//dariof/osstest/debian-installer/amd64/current-wheezy/firmware-bnx2.cpio.gz tmp/t.ultralisk.initrd.cpio: 93.4% -- replaced with tmp/t.ultralisk.initrd.cpio.gz 2013-10-30 18:50:51 Z using initrds: /usr/groups/netboot//dariof/osstest/debian-installer/amd64/current-wheezy/initrd.gz tmp/t.ultralisk.initrd.cpio.gz cat: /usr/groups/netboot//dariof/osstest/debian-installer/amd64/current-wheezy/initrd.gz: No such file or directory cat -- /usr/groups/netboot//dariof/osstest/debian-installer/amd64/current-wheezy/initrd.gz tmp/t.ultralisk.initrd.cpio.gz >/usr/groups/netboot/dariof/osstest/tmp/ultralisk--initrd.gz: 256 at Osstest.pm line 275. Which is completely understandable, since there is no 'current-wheezy' dir there. What I miss is from where that directory name comes from and how to change that to something sensible via config file tweaks or anything else. So, what am I missing and/or doing wrong? I tried to remove any reference to the firmware-bnx2 thing, but nothing really changed. Thanks and Regards, Dario -- config file: DnsDomain uk.xensource.com NetNameservers 10.80.248.2 10.80.16.28 10.80.16.67 DebianNonfreeFirmware firmware-bnx2 #DebianSuite squeeze DebianSuite wheezy TestHost ultralisk HostProp_ultralisk_PowerMethod xenuse HostProp_ultralisk_Build_Make_Flags -j16 HostFlags_ultralisk need-firmware-deb-firmware-bnx2 HostProp_DhcpWatchMethod leases dhcp3 dhcp.uk.xensource.com:5556 TftpPath /usr/groups/netboot/ DebianMirrorHost debian.uk.xensource.com DebianPreseed= <<'END' d-i clock-setup/ntp-server string ntp.uk.xensource.com END WebspaceUrl http://dt47.uk.xensource.com/~dariof/ WebspaceLog /var/log/apache2/access.log -- <<This happens because I choose it to happen!>> (Raistlin Majere) ----------------------------------------------------------------- Dario Faggioli, Ph.D, http://about.me/dario.faggioli Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK) Attachment:
signature.asc _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |