[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [xen-unstable test] 20099: regressions - trouble: broken/fail/pass
On Mon, 2013-10-07 at 20:12 +0100, xen.org wrote: > test-armhf-armhf-xl 3 host-install(3) broken never > pass From the serial logs: Retrieving file: pxe/pxelinux.cfg/01-fc-2f-40-dd-a8-4c Using xgmac0 device TFTP from server 10.80.248.135; our IP address is 10.80.229.109; sending through gateway 10.80.224.1 Filename 'pxe/pxelinux.cfg/01-fc-2f-40-dd-a8-4c'. Load address: 0x700000 Loading: # done Bytes transferred = 506 (1fa hex) Config file found Ignoring unknown command: serial 1: ^Overwrite Retrieving file: /osstest/tmp/marilith-n5--initrd.gz Using xgmac0 device TFTP from server 10.80.248.135; our IP address is 10.80.229.109; sending through gateway 10.80.224.1 Filename '/osstest/tmp/marilith-n5--initrd.gz'. Load address: 0x4000000 Loading: TFTP error: 'File not found' (1) Not retrying... Skipping overwrite for failure retrieving initrd Highbank # So it seems that u-boot only supports taking the prefix from the filename when fetching the pxelinux.cfg file and not when fetching any files referenced from that config. I've added a symlink /tftpboot/osstest -> pxe/osstest. Bit of a skanky hack, hopefully we can get u-boot fixed at some point. Ian. _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |