[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] ASMedia ASM1083/1085 rev3 and Xen DMA Failure



On Fri, Oct 04, 2013 at 11:29:58AM -0600, Bjorn Helgaas wrote:
> [+cc Konrad, xen-devel]

Hey Bjorn, Thanks!
> 
> On Wed, Oct 02, 2013 at 04:43:46PM -0400, Aaron Opfer wrote:
> > First time submitting the kernel dev list, so if I have demonstrated
> > gross incompetence in some way, please cut me some slack. :)
> > 
> > I discussed with Clemens Ladisch an issue I was having that I thought
> > was related to the driver he authored for my soundcard, but on his
> > suggestion I experimented with other PCI devices and we have narrowed
> > the issue to the PCI Bridge.
> > 
> > What hints me toward DMA handling being the fault is the following
> > message I receive during kernel initialization after rebooting from an
> > Xen hypervisor into a baremetal-kernel, without a power-cycle:
> > 
> > [0.012815] dmar: DRHD: handling fault status reg 3
> > [0.012868] dmar: DMAR:[DMA Read] Request device [07:00.0] fault addr 7e00000
> > [0.012868] DMAR:[fault reason 02] Present bit in context entry is clear
> 
> Presumably 07:00.0 is your soundcard, and apparently it did a DMA
> read to 0x7e00000, which wasn't mapped by the IOMMU.
> 
> > In addition to other hints, such as simple IO like changing the active
> > port on the soundcard worked (I could hear the relays clicking) but
> > not the functions that DMA would be used (streaming audio).
> > 
> > The PCI devices in my system are connected via this device, as listed by 
> > lspci:
> > 
> > 06:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
> > Bridge (rev 03)
> > 
> > This PCI bridge works under bare-metal Linux normally (w/ various
> > debian kernels stable/unstable/testing/backports), but under Xen
> > Hypervisor the PCI devices connected exhibit bad behavior.
> 
> So it fails with Xen but works otherwise?  I assume there are other
> PCI devices, too?  Do they work?
> 
> If you want to open a report at http://bugzilla.kernel.org, that would
> be a handy place to attach a complete dmesg log and "lspci -vv" output
> for more details.
> 
> > For
> > instance, aformentioned sound card outputs no sound and gets no
> > microphone input at all, and an ethernet card causes a system lockup
> > as soon as gnome's network manager attempts DHCP over it (presumably;
> > I did not test this as thoroughly as the sound card).
> > 
> > I've used Xen Hypervisors 4.1 and 4.2 and had the issues I described
> > above with both of them. I was briefly running 4.3 but I did not test
> > the device.

So lets seperate some of these issues. The sound-card issue might be
related to the Linux kernel Xen-SWIOTLB (fixed at some point)- so could
you tell me what the kernel version you have?

Xen 4.3 also has numerous fixes in the IOMMU path.

> > 
> > Rev1 of the ASM1083 was apparently buggy to the point of being
> > unusable, as Clemens pointed out. I would be disappointed if this
> > device is similarly unsalvageable,but would be happier if this buggy
> > hardware at the very least outputted warnings to users who attempt to
> > use it (in Xen).
> > 
> > All The Best,
> > 
> > Aaron Opfer
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.