[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] RESEND [Xen-unstable][Qemu-xen] HVM Guest reading of Expansion ROM from passthroughed PCI device returns data from emulated VGA rom




> -----Original Message-----
> From: xen-devel-bounces@xxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxx] On Behalf Of Sander Eikelenboom
> Sent: Sunday, September 22, 2013 11:01 PM
> To: Pasi Kärkkäinen
> Cc: Anthony PERARD; xen-devel; qemu-devel@xxxxxxxxxx; Stefano Stabellini
> Subject: Re: [Xen-devel] RESEND [Xen-unstable][Qemu-xen] HVM Guest reading
> of Expansion ROM from passthroughed PCI device returns data from emulated
> VGA rom
> 
> 
> Sunday, September 22, 2013, 3:02:45 PM, you wrote:
> 
> > On Tue, Sep 17, 2013 at 04:33:39PM +0200, Sander Eikelenboom wrote:
> >> *RESEND* due to exceeding the mailinglists limit for attachment size.
> >>
> >> Hi,
> >>
> 
> > Hello,
> 
> >> I'm trying to get secondary vga-passthrough on a HVM guest to work with a
> AMD HD6570 and the native kernel radeon driver and kernel modesetting.
> >> So the guest still gets the emulated stdvga or cirrus device(used in my 
> >> case
> here) as primary/boot vga adapter.
> >>
> >> - When i don't passthrough the radeon card, the linux native radeon driver
> loads fine.
> >> - When i do passtrough the device to a HVM with the same kernel:
> >>   The driver in the guest tries to read the pci expansion rom from the
> passthroughed device to get the vbios.
> >>   The driver reports a successful read, but fails because it can't find the
> right string at the right offset.
> >>
> 
> > Did you try with qemu-dm-traditional aswell? Does it have the same
> problem?
> 
> Hi Pasi,
> 
> Yes i did and yes the same problem.
> From what i recall i used to have succes with vga passthrough with a secondary
> vga card, but that was some time ago.
> I don't know which of the components (xen, dom0 kernel, domU kernel, radeon
> driver, qemu has changed in such a way that it fails to work now ...
> 
> 
> But in the mean time i tried to debug it further and from what i can see:
> - Only the io port en mem of the pci device are mapped through the hypervisor.
> - The rom is not, (a hypercall to do the memory mapping is never made) i tried
> several things to get it to do the mapping, but so far failt to do so.
> - It seems to be a 64bit capable device, some code comments and git commit
> messages seem to suggest that there were/are some problems with that (in
> the way the involved components interact)
> 

Can you send out the all the logs when using qemu-dm-traditional as well as the 
guest configuration file used by xl ?

> --
> Sander
> 
> > Thanks,
> 
> > -- Pasi
> 
> >> So I inspected the rom by using sysfs with:
> >> echo 1 > /sys/bus/pci/devices/<BDF>/rom
> >> cat /sys/bus/pci/devices/<BDF>/rom
> >>
> >> - When i use this in dom0 (so without passthrough) i the contents of the
> ROM are valid (as expected since the driver loads fine)
> >> - When i use this in the Guest (passthrouhed), the contents of the ROM i 
> >> get
> are not from the passedthrough adapter, but from the emulated cirrus card.
> >>   (it's the same as the
> "tools/firmware/vgabios/VGABIOS-lgpl-latest.cirrus.bin")
> >>
> >> So i tried both qemu-xen and qemu-xen-traditional, but both with the same
> result.
> >> To see if some addresses get mangled i enabled the xen passthrough debug
> printk's for both qemu's and added a printk to the radeon driver to see where 
> it
> tries to read the rom.
> >>
> >> from dom0 lspci:
> >> 07:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
> nee ATI Turks [Radeon HD 6570] [1002:6759] (prog-if 00 [VGA controller])
> >>         Subsystem: PC Partner Limited Device [174b:e193]
> >>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>         Interrupt: pin A routed to IRQ 32
> >>         Region 0: Memory at a0000000 (64-bit, prefetchable) [disabled]
> [size=256M]
> >>         Region 2: Memory at f99c0000 (64-bit, non-prefetchable)
> [disabled] [size=128K]
> >>         Region 4: I/O ports at a000 [disabled] [size=256]
> >>         Expansion ROM at f99a0000 [disabled] [size=128K]
> >>
> >> from qemu-dm-log:
> >> vgabios-cirrus.bin: ROM id 101300b8 / PCI id 101300b8
> >> pxe-e1000.rom: ROM id 8086100e / PCI id 8086100e
> >> xen_platform: changed ro/rw state of ROM memory area. now is rw state.
> >> xen: I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
> >> xen: I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
> >> [00:05.0] xen_pt_initfn: Assigning real physical device 07:00.0 to devfn 
> >> 0x28
> >> [00:05.0] xen_pt_register_regions: IO region 0 registered
> (size=0x10000000lx base_addr=0xa0000000lx type: 0x4)
> >> [00:05.0] xen_pt_register_regions: IO region 2 registered (size=0x20000lx
> base_addr=0xf99c0000lx type: 0x4)
> >> [00:05.0] xen_pt_register_regions: IO region 4 registered (size=0x100lx
> base_addr=0xa000lx type: 0x1)
> >> [00:05.0] xen_pt_register_regions: Expansion ROM registered
> (size=0x00020000 base_addr=0xf99a0000)
> >>
> >> That seems to match ...
> >>
> >> from guest lspci:
> >> 00:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
> nee ATI Turks [Radeon HD 6570] [1002:6759] (prog-if 00 [VGA controller])
> >>         Subsystem: PC Partner Limited Device [174b:e193]
> >>         Physical Slot: 5
> >>         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>         Interrupt: pin A routed to IRQ 36
> >>         Region 0: Memory at e0000000 (64-bit, prefetchable)
> [size=256M]
> >>         Region 2: Memory at f3040000 (64-bit, non-prefetchable)
> [size=128K]
> >>         Region 4: I/O ports at c100 [size=256]
> >>         Expansion ROM at f3060000 [disabled] [size=128K]
> >>
> >> from the radeon driver in the guest:
> >>
> >> [    1.283333] pci 0000:00:01.1: BAR 0: reserving [io  0x01f0-0x01f7 flags
> 0x110] (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 1: reserving [io  0x03f6 flags 0x110]
> (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 2: reserving [io  0x0170-0x0177
> flags 0x110] (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 3: reserving [io  0x0376 flags 0x110]
> (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 4: reserving [io  0xc260-0xc26f flags
> 0x40101] (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.2: BAR 4: reserving [io  0xc240-0xc25f flags
> 0x40101] (d=0, p=0)
> >> [    1.283333] pci 0000:00:02.0: BAR 0: reserving [mem
> 0xf0000000-0xf1ffffff flags 0x42208] (d=0, p=0)
> >> [    1.283333] pci 0000:00:02.0: BAR 1: reserving [mem
> 0xf3094000-0xf3094fff flags 0x40200] (d=0, p=0)
> >> [    1.283493] pci 0000:00:03.0: BAR 0: reserving [io  0xc000-0xc0ff flags
> 0x40101] (d=0, p=0)
> >> [    1.285517] pci 0000:00:03.0: BAR 1: reserving [mem
> 0xf2000000-0xf2ffffff flags 0x42208] (d=0, p=0)
> >> [    1.286666] pci 0000:00:05.0: BAR 0: reserving [mem
> 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0)
> >> [    1.286666] pci 0000:00:05.0: BAR 2: reserving [mem
> 0xf3040000-0xf305ffff flags 0x140204] (d=0, p=0)
> >> [    1.286666] pci 0000:00:05.0: BAR 4: reserving [io  0xc100-0xc1ff flags
> 0x40101] (d=0, p=0)
> >> [    1.286666] pci 0000:00:06.0: BAR 0: reserving [mem
> 0xf3090000-0xf3093fff flags 0x140204] (d=0, p=0)
> >>
> >> <snip>
> >>
> >> [    1.744843] [drm] Initialized drm 1.1.0 20060810
> >> [    1.746503] [drm] radeon kernel modesetting enabled.
> >> [    1.747964] [drm:drm_pci_init],
> >> [    1.749911] [drm:drm_get_pci_dev],
> >> [    1.752812] xen: --> pirq=32 -> irq=36 (gsi=36)
> >> [    1.755203] [drm:drm_get_minor],
> >> [    1.757902] [drm:drm_get_minor], new minor assigned 64
> >> [    1.760337] [drm:drm_get_minor],
> >> [    1.762547] [drm:drm_get_minor], new minor assigned 0
> >> [    1.765509] [drm] initializing kernel modesetting (TURKS 0x1002:0x6759
> 0x174B:0xE193).
> >> [    1.767705] [drm] register mmio base: 0xF3040000
> >> [    1.769135] [drm] register mmio size: 131072
> >> [    1.770551] [drm] radeon_atrm_get_bios: failed
> >> [    1.771878] [drm] radeon_acpi_vfct_bios: failed
> >> [    1.773193] [drm] igp_read_bios_from_vram: failed
> >> [    1.774744] [drm:radeon_read_bios], BIOS radeon_read_bios: size:
> 0x8c00 biosiomemstart: 0xf3060000
> >> [    1.777717] [drm] radeon_read_bios: succes
> >> [    1.779057] [drm:radeon_get_bios], BIOS headerstart: 0x2077 bios
> length: 6|8 headerstring 0xc6 0x7c 0x0 0x0
> >> [    1.784874] [drm:radeon_get_bios], COMBIOS detected
> >> [    1.786811] radeon 0000:00:05.0: Expecting atombios for evergreen
> GPU
> >> [    1.788255] radeon 0000:00:05.0: Fatal error during GPU init
> >> [    1.789919] [drm] radeon: finishing device.
> >>
> >> So the address that the radeon_read_bios function uses, also matches.
> >>
> >> So i'm pretty clueless how it ends up with the data from the cirrus rom 
> >> when
> it's reading the right address ...
> >>
> >>
> >> I'm using:
> >> Xen:               Xen-unstable git:c5e9596
> >> Linux dom0 + domU: 3.12-mergewindow + konrad's jumplabel patch (i also
> tested with 3.9.0 kernel)
> >>
> >> I have attached the qemu-xen logs, but i have the qemu-xen-traditional logs
> as well.
> >>
> >> Attached:
> >> - xl-dmesg.txt                   output of "xl dmesg" with start and
> shutdown of the guest
> >> - xl-create.txt                  output of "xl -vvvvv create" of the guest
> >> - lspci-dom0.txt                 output of "lspci -vvvknn" for dom0
> >> - lspci-guest.txt                output of "lspci -vvvknn" for guest
> >> - qemu-dm-guest-reduced.log      qemu log, reduced to be acceptable for
> the mailing list.
> >>                                  a complete log with all pci config
> reads and writes
> >>                                  can be found at:
> http://home.eikelenboom.it/qemu-dm-guest.log
> >> - dmesg-guest.txt
> >>
> >> --
> >>
> >> Sander
> 
> >> [    0.000000] Initializing cgroup subsys cpuset
> >> [    0.000000] Initializing cgroup subsys cpu
> >> [    0.000000] Initializing cgroup subsys cpuacct
> >> [    0.000000] Linux version 3.11.0 (root@xbmc) (gcc version 4.7.2 (Debian
> 4.7.2-5) ) #1 SMP PREEMPT Sun Sep 15 21:22:44 CEST 2013
> >> [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0
> root=UUID=4b432b33-87ec-4522-8b10-5dba3f49099e ro drm.debug=255
> debug loglevel=8
> >> [    0.000000] e820: BIOS-provided physical RAM map:
> >> [    0.000000] BIOS-e820: [mem
> 0x0000000000000000-0x000000000009fbff] usable
> >> [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]
> reserved
> >> [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
> reserved
> >> [    0.000000] BIOS-e820: [mem
> 0x0000000000100000-0x000000003f7fefff] usable
> >> [    0.000000] BIOS-e820: [mem 0x000000003f7ff000-0x000000003f7fffff]
> reserved
> >> [    0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff]
> reserved
> >> [    0.000000] NX (Execute Disable) protection: active
> >> [    0.000000] SMBIOS 2.4 present.
> >> [    0.000000] DMI: Xen HVM domU, BIOS 4.4-unstable 09/17/2013
> >> [    0.000000] Hypervisor detected: Xen HVM
> >> [    0.000000] Xen version 4.4.
> >> [    0.000000] Xen Platform PCI: I/O protocol version 1
> >> [    0.000000] Netfront and the Xen platform PCI driver have been
> compiled for this kernel: unplug emulated NICs.
> >> [    0.000000] Blkfront and the Xen platform PCI driver have been compiled
> for this kernel: unplug emulated disks.
> >> [    0.000000] You might have to change the root device
> >> [    0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
> >> [    0.000000] in your root= kernel command line option
> >> [    0.000000] HVMOP_pagetable_dying not supported
> >> [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
> reserved
> >> [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> >> [    0.000000] No AGP bridge found
> >> [    0.000000] e820: last_pfn = 0x3f7ff max_arch_pfn = 0x400000000
> >> [    0.000000] MTRR default type: write-back
> >> [    0.000000] MTRR fixed ranges enabled:
> >> [    0.000000]   00000-9FFFF write-back
> >> [    0.000000]   A0000-BFFFF write-combining
> >> [    0.000000]   C0000-FFFFF write-back
> >> [    0.000000] MTRR variable ranges enabled:
> >> [    0.000000]   0 base 0000E0000000 mask FFFFF0000000 uncachable
> >> [    0.000000]   1 base 0000F0000000 mask FFFFF8000000 uncachable
> >> [    0.000000]   2 base 0000F8000000 mask FFFFFC000000 uncachable
> >> [    0.000000]   3 disabled
> >> [    0.000000]   4 disabled
> >> [    0.000000]   5 disabled
> >> [    0.000000]   6 disabled
> >> [    0.000000]   7 disabled
> >> [    0.000000] TOM2: 0000000560000000 aka 22016M
> >> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> >> [    0.000000] found SMP MP-table at [mem 0x000fdad0-0x000fdadf]
> mapped at [ffff8800000fdad0]
> >> [    0.000000] Scanning 1 areas for low memory corruption
> >> [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size
> 24576
> >> [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> >> [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
> >> [    0.000000] BRK [0x02960000, 0x02960fff] PGTABLE
> >> [    0.000000] BRK [0x02961000, 0x02961fff] PGTABLE
> >> [    0.000000] BRK [0x02962000, 0x02962fff] PGTABLE
> >> [    0.000000] init_memory_mapping: [mem 0x3f400000-0x3f5fffff]
> >> [    0.000000]  [mem 0x3f400000-0x3f5fffff] page 2M
> >> [    0.000000] init_memory_mapping: [mem 0x3c000000-0x3f3fffff]
> >> [    0.000000]  [mem 0x3c000000-0x3f3fffff] page 2M
> >> [    0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
> >> [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
> >> [    0.000000]  [mem 0x00200000-0x3bffffff] page 2M
> >> [    0.000000] init_memory_mapping: [mem 0x3f600000-0x3f7fefff]
> >> [    0.000000]  [mem 0x3f600000-0x3f7fefff] page 4k
> >> [    0.000000] BRK [0x02963000, 0x02963fff] PGTABLE
> >> [    0.000000] RAMDISK: [mem 0x3762e000-0x37b0efff]
> >> [    0.000000] ACPI: RSDP 00000000000fda20 00024 (v02    Xen)
> >> [    0.000000] ACPI: XSDT 00000000fc009fc0 00054 (v01    Xen
> HVM 00000000 HVML 00000000)
> >> [    0.000000] ACPI: FACP 00000000fc0098f0 000F4 (v04    Xen
> HVM 00000000 HVML 00000000)
> >> [    0.000000] ACPI: DSDT 00000000fc0012a0 085CD (v02    Xen
> HVM 00000000 INTL 20100528)
> >> [    0.000000] ACPI: FACS 00000000fc001260 00040
> >> [    0.000000] ACPI: APIC 00000000fc0099f0 00460 (v02    Xen
> HVM 00000000 HVML 00000000)
> >> [    0.000000] ACPI: HPET 00000000fc009ed0 00038 (v01    Xen
> HVM 00000000 HVML 00000000)
> >> [    0.000000] ACPI: WAET 00000000fc009f10 00028 (v01    Xen
> HVM 00000000 HVML 00000000)
> >> [    0.000000] ACPI: SSDT 00000000fc009f40 00031 (v02    Xen
> HVM 00000000 INTL 20100528)
> >> [    0.000000] ACPI: SSDT 00000000fc009f80 00031 (v02    Xen
> HVM 00000000 INTL 20100528)
> >> [    0.000000] ACPI: Local APIC address 0xfee00000
> >> [    0.000000] No NUMA configuration found
> >> [    0.000000] Faking a node at [mem
> 0x0000000000000000-0x000000003f7fefff]
> >> [    0.000000] Initmem setup node 0 [mem 0x00000000-0x3f7fefff]
> >> [    0.000000]   NODE_DATA [mem 0x3f7f4000-0x3f7fefff]
> >> [    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD ->
> [ffff88003de00000-ffff88003edfffff] on node 0
> >> [    0.000000] Zone ranges:
> >> [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
> >> [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
> >> [    0.000000]   Normal   empty
> >> [    0.000000] Movable zone start for each node
> >> [    0.000000] Early memory node ranges
> >> [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
> >> [    0.000000]   node   0: [mem 0x00100000-0x3f7fefff]
> >> [    0.000000] On node 0 totalpages: 259997
> >> [    0.000000]   DMA zone: 64 pages used for memmap
> >> [    0.000000]   DMA zone: 21 pages reserved
> >> [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
> >> [    0.000000]   DMA32 zone: 4000 pages used for memmap
> >> [    0.000000]   DMA32 zone: 255999 pages, LIFO batch:31
> >> [    0.000000] ACPI: PM-Timer IO Port: 0xb008
> >> [    0.000000] ACPI: Local APIC address 0xfee00000
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x1e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x22] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x24] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x26] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x28] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x2a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x2c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x2e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x32] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x34] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x36] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x38] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x40] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x42] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x44] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x46] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x48] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x4a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x4c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x4e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x50] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x52] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x54] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x56] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x58] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x5a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x5c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x5e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x60] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x62] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x64] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x66] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x68] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x6a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x6c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x6e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x70] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x72] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x74] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x76] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x78] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x7a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x7c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x7e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x80] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x41] lapic_id[0x82] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x42] lapic_id[0x84] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x43] lapic_id[0x86] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x44] lapic_id[0x88] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x45] lapic_id[0x8a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x46] lapic_id[0x8c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x47] lapic_id[0x8e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x48] lapic_id[0x90] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x49] lapic_id[0x92] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x4a] lapic_id[0x94] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x4b] lapic_id[0x96] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x4c] lapic_id[0x98] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x4d] lapic_id[0x9a] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x4e] lapic_id[0x9c] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x4f] lapic_id[0x9e] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x50] lapic_id[0xa0] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x51] lapic_id[0xa2] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x52] lapic_id[0xa4] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x53] lapic_id[0xa6] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x54] lapic_id[0xa8] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x55] lapic_id[0xaa] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x56] lapic_id[0xac] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x57] lapic_id[0xae] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x58] lapic_id[0xb0] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x59] lapic_id[0xb2] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x5a] lapic_id[0xb4] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x5b] lapic_id[0xb6] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x5c] lapic_id[0xb8] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x5d] lapic_id[0xba] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x5e] lapic_id[0xbc] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x5f] lapic_id[0xbe] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x60] lapic_id[0xc0] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x61] lapic_id[0xc2] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x62] lapic_id[0xc4] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x63] lapic_id[0xc6] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x64] lapic_id[0xc8] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x65] lapic_id[0xca] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x66] lapic_id[0xcc] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x67] lapic_id[0xce] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x68] lapic_id[0xd0] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x69] lapic_id[0xd2] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x6a] lapic_id[0xd4] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x6b] lapic_id[0xd6] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x6c] lapic_id[0xd8] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x6d] lapic_id[0xda] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x6e] lapic_id[0xdc] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x6f] lapic_id[0xde] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x70] lapic_id[0xe0] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x71] lapic_id[0xe2] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x72] lapic_id[0xe4] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x73] lapic_id[0xe6] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x74] lapic_id[0xe8] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x75] lapic_id[0xea] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x76] lapic_id[0xec] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x77] lapic_id[0xee] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x78] lapic_id[0xf0] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x79] lapic_id[0xf2] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x7a] lapic_id[0xf4] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x7b] lapic_id[0xf6] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x7c] lapic_id[0xf8] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x7d] lapic_id[0xfa] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x7e] lapic_id[0xfc] disabled)
> >> [    0.000000] ACPI: LAPIC (acpi_id[0x7f] lapic_id[0xfe] disabled)
> >> [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> >> [    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI
> 0-47
> >> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> >> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
> >> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low
> level)
> >> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low
> level)
> >> [    0.000000] ACPI: IRQ0 used by override.
> >> [    0.000000] ACPI: IRQ2 used by override.
> >> [    0.000000] ACPI: IRQ5 used by override.
> >> [    0.000000] ACPI: IRQ9 used by override.
> >> [    0.000000] ACPI: IRQ10 used by override.
> >> [    0.000000] ACPI: IRQ11 used by override.
> >> [    0.000000] Using ACPI (MADT) for SMP configuration information
> >> [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> >> [    0.000000] smpboot: 128 Processors exceeds NR_CPUS limit of 8
> >> [    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
> >> [    0.000000] nr_irqs_gsi: 64
> >> [    0.000000] e820: [mem 0x3f800000-0xfbffffff] available for PCI devices
> >> [    0.000000] Booting paravirtualized kernel on Xen HVM
> >> [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
> nr_node_ids:1
> >> [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f400000
> s83136 r8192 d23360 u262144
> >> [    0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
> >> [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> >> [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  
> >> Total
> pages: 255912
> >> [    0.000000] Policy zone: DMA32
> >> [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0
> root=UUID=4b432b33-87ec-4522-8b10-5dba3f49099e ro drm.debug=255
> debug loglevel=8
> >> [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> >> [    0.000000] Checking aperture...
> >> [    0.000000] No AGP bridge found
> >> [    0.000000] Memory: 991448K/1039988K available (10109K kernel code,
> 955K rwdata, 4060K rodata, 1068K init, 9580K bss, 48540K reserved)
> >> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
> Nodes=1
> >> [    0.000000] Preemptible hierarchical RCU implementation.
> >> [    0.000000]        RCU dyntick-idle grace-period acceleration is
> enabled.
> >> [    0.000000]        Additional per-CPU info printed with stalls.
> >> [    0.000000] NR_IRQS:4352 nr_irqs:1152 16
> >> [    0.000000] xen:events: Xen HVM callback vector for event delivery is
> enabled
> >> [    0.000000] Console: colour VGA+ 80x25
> >> [    0.000000] console [tty0] enabled
> >> [    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
> Ingo Molnar
> >> [    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
> >> [    0.000000] ... MAX_LOCK_DEPTH:          48
> >> [    0.000000] ... MAX_LOCKDEP_KEYS:        8191
> >> [    0.000000] ... CLASSHASH_SIZE:          4096
> >> [    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
> >> [    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
> >> [    0.000000] ... CHAINHASH_SIZE:          16384
> >> [    0.000000]  memory used by lock dependency info: 5855 kB
> >> [    0.000000]  per task-struct memory footprint: 1920 bytes
> >> [    0.000000] kmemleak: Kernel memory leak detector disabled
> >> [    0.000000] hpet clockevent registered
> >> [    0.000000] tsc: Detected 3200.144 MHz processor
> >> [    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
> >> [    0.006666] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 6402.96 BogoMIPS (lpj=10667146)
> >> [    0.007910] pid_max: default: 32768 minimum: 301
> >> [    0.009404] Dentry cache hash table entries: 131072 (order: 8, 1048576
> bytes)
> >> [    0.010274] Inode-cache hash table entries: 65536 (order: 7, 524288
> bytes)
> >> [    0.013509] Mount-cache hash table entries: 256
> >> [    0.015617] Initializing cgroup subsys freezer
> >> [    0.016702] Initializing cgroup subsys blkio
> >> [    0.018219] tseg: 0000000000
> >> [    0.020054] CPU: Physical Processor ID: 0
> >> [    0.021397] CPU: Processor Core ID: 0
> >> [    0.022677] mce: CPU supports 2 MCE banks
> >> [    0.023358] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
> >> [    0.023358] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
> >> [    0.023358] tlb_flushall_shift: 4
> >> [    0.026971] Freeing SMP alternatives memory: 32K (ffffffff81ffb000 -
> ffffffff82003000)
> >> [    0.031792] ACPI: Core revision 20130725
> >> [    0.041888] ACPI: All ACPI Tables successfully acquired
> >> [    0.047025] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> >> [    0.082537] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor
> (fam: 10, model: 0a, stepping: 00)
> >> [    0.086449] Xen: using vcpuop timer interface
> >> [    0.086676] installing Xen timer for CPU 0
> >> [    0.088169] Performance Events: Broken PMU hardware detected,
> using software events only.
> >> [    0.089999] Failed to access perfctr msr (MSR c0010004 is 0)
> >> [    0.113523] NMI watchdog: disabled (cpu0): hardware events not
> enabled
> >> [    0.120163] installing Xen timer for CPU 1
> >> [    0.121727] SMP alternatives: lockdep: fixing up alternatives
> >> [    0.123380] smpboot: Booting Node   0, Processors  #1
> >> [    0.230557] Brought up 2 CPUs
> >> [    0.232915] smpboot: Total of 2 processors activated (12904.77
> BogoMIPS)
> >> [    0.237280] xor: measuring software checksum speed
> >> [    0.270031]    prefetch64-sse:   854.400 MB/sec
> >> [    0.303355]    generic_sse:   860.400 MB/sec
> >> [    0.306019] xor: using function: generic_sse (860.400 MB/sec)
> >> [    0.306921] NET: Registered protocol family 16
> >> [    0.310119] xenbus: xs_reset_watches failed: -38
> >> [    0.313427] cpuidle: using governor ladder
> >> [    0.316677] cpuidle: using governor menu
> >> [    0.333188] ACPI: bus type PCI registered
> >> [    0.333356] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> >> [    0.337653] PCI: Using configuration type 1 for base access
> >> [    0.340012] PCI: Using configuration type 1 for extended access
> >> [    0.389611] bio: create slab <bio-0> at 0
> >> [    0.450052] raid6: sse2x1    2658 MB/s
> >> [    0.511079] raid6: sse2x2    3617 MB/s
> >> [    0.566841] raid6: sse2x4    3268 MB/s
> >> [    0.568215] raid6: using algorithm sse2x2 (3617 MB/s)
> >> [    0.569591] raid6: using intx1 recovery algorithm
> >> [    0.576735] ACPI: Added _OSI(Module Device)
> >> [    0.578237] ACPI: Added _OSI(Processor Device)
> >> [    0.579572] ACPI: Added _OSI(3.0 _SCP Extensions)
> >> [    0.580039] ACPI: Added _OSI(Processor Aggregator Device)
> >> [    0.587697] ACPI: EC: Look up EC in DSDT
> >> [    0.600422] ACPI: Interpreter enabled
> >> [    0.603404] ACPI: (supports S0 S5)
> >> [    0.606682] ACPI: Using IOAPIC for interrupt routing
> >> [    0.608147] PCI: Using host bridge windows from ACPI; if necessary, use
> "pci=nocrs" and report a bug
> >> [    0.638813] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> >> [    0.640021] acpi PNP0A03:00: ACPI _OSC support notification failed,
> disabling PCIe ASPM
> >> [    0.642119] acpi PNP0A03:00: Unable to request _OSC control (_OSC
> support mask: 0x08)
> >> [    0.644027] pci_bus 0000:00: dev 01, created physical slot 1
> >> [    0.645538] pci_bus 0000:00: dev 02, created physical slot 2
> >> [    0.646696] pci_bus 0000:00: dev 03, created physical slot 3
> >> [    0.650016] pci_bus 0000:00: dev 04, created physical slot 4
> >> [    0.650016] pci_bus 0000:00: dev 05, created physical slot 5
> >> [    0.653367] pci_bus 0000:00: dev 06, created physical slot 6
> >> [    0.655112] pci_bus 0000:00: dev 07, created physical slot 7
> >> [    0.656508] pci_bus 0000:00: dev 08, created physical slot 8
> >> [    0.656741] pci_bus 0000:00: dev 09, created physical slot 9
> >> [    0.658161] pci_bus 0000:00: dev 0a, created physical slot 10
> >> [    0.659565] pci_bus 0000:00: dev 0b, created physical slot 11
> >> [    0.660036] pci_bus 0000:00: dev 0c, created physical slot 12
> >> [    0.661420] pci_bus 0000:00: dev 0d, created physical slot 13
> >> [    0.663415] pci_bus 0000:00: dev 0e, created physical slot 14
> >> [    0.664832] pci_bus 0000:00: dev 0f, created physical slot 15
> >> [    0.666589] pci_bus 0000:00: dev 10, created physical slot 16
> >> [    0.670027] pci_bus 0000:00: dev 11, created physical slot 17
> >> [    0.671489] pci_bus 0000:00: dev 12, created physical slot 18
> >> [    0.673000] pci_bus 0000:00: dev 13, created physical slot 19
> >> [    0.673382] pci_bus 0000:00: dev 14, created physical slot 20
> >> [    0.674831] pci_bus 0000:00: dev 15, created physical slot 21
> >> [    0.676298] pci_bus 0000:00: dev 16, created physical slot 22
> >> [    0.676736] pci_bus 0000:00: dev 17, created physical slot 23
> >> [    0.678140] pci_bus 0000:00: dev 18, created physical slot 24
> >> [    0.683376] pci_bus 0000:00: dev 19, created physical slot 25
> >> [    0.685751] pci_bus 0000:00: dev 1a, created physical slot 26
> >> [    0.686708] pci_bus 0000:00: dev 1b, created physical slot 27
> >> [    0.689182] pci_bus 0000:00: dev 1c, created physical slot 28
> >> [    0.690042] pci_bus 0000:00: dev 1d, created physical slot 29
> >> [    0.692324] pci_bus 0000:00: dev 1e, created physical slot 30
> >> [    0.696707] pci_bus 0000:00: dev 1f, created physical slot 31
> >> [    0.699644] ACPI: \_SB_.PCI0.HPET: can't evaluate _ADR (0x5)
> >> [    0.703549] ACPI: \_SB_.PCI0.HP0_: can't evaluate _ADR (0x5)
> >> [    0.705792] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
> >> [    0.706679] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
> >> [    0.709070] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
> >> [    0.713351] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
> >> [    0.716686] acpiphp: Slot [3] registered
> >> [    0.717007] acpiphp: Slot [4] registered
> >> [    0.720251] acpiphp: Slot [5] registered
> >> [    0.723376] acpiphp: Slot [6] registered
> >> [    0.727052] acpiphp: Slot [7] registered
> >> [    0.730039] acpiphp: Slot [8] registered
> >> [    0.733573] acpiphp: Slot [9] registered
> >> [    0.736705] acpiphp: Slot [10] registered
> >> [    0.736971] acpiphp: Slot [11] registered
> >> [    0.740038] acpiphp: Slot [12] registered
> >> [    0.743689] acpiphp: Slot [13] registered
> >> [    0.746702] acpiphp: Slot [14] registered
> >> [    0.750388] acpiphp: Slot [15] registered
> >> [    0.753398] acpiphp: Slot [16] registered
> >> [    0.755940] acpiphp: Slot [17] registered
> >> [    0.756714] acpiphp: Slot [18] registered
> >> [    0.767101] acpiphp: Slot [19] registered
> >> [    0.770081] acpiphp: Slot [20] registered
> >> [    0.773377] acpiphp: Slot [21] registered
> >> [    0.776971] acpiphp: Slot [22] registered
> >> [    0.780060] acpiphp: Slot [23] registered
> >> [    0.790129] acpiphp: Slot [24] registered
> >> [    0.803393] acpiphp: Slot [25] registered
> >> [    0.831233] acpiphp: Slot [26] registered
> >> [    0.837007] acpiphp: Slot [27] registered
> >> [    0.840098] acpiphp: Slot [28] registered
> >> [    0.843376] acpiphp: Slot [29] registered
> >> [    0.846712] acpiphp: Slot [30] registered
> >> [    0.850117] acpiphp: Slot [31] registered
> >> [    0.850117] PCI host bridge to bus 0000:00
> >> [    0.852315] pci_bus 0000:00: root bus resource [bus 00-ff]
> >> [    0.856693] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
> >> [    0.859453] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
> >> [    0.860071] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff]
> >> [    0.862869] pci_bus 0000:00: root bus resource [mem
> 0xe0000000-0xfbffffff]
> >> [    0.866679] pci_bus 0000:00: scanning bus
> >> [    0.869852] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
> >> [    0.873563] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
> >> [    0.884192] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
> >> [    0.895546] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
> >> [    0.929999] pci 0000:00:01.1: reg 0x20: [io  0xc260-0xc26f]
> >> [    0.952118] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
> >> [    0.986421] pci 0000:00:01.2: reg 0x20: [io  0xc240-0xc25f]
> >> [    1.000514] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
> >> [    1.002072] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x40
> >> [    1.007076] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x140
> >> [    1.008648] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by
> PIIX4 ACPI
> >> [    1.013502] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by
> PIIX4 SMB
> >> [    1.015438] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x10
> >> [    1.017615] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
> >> [    1.030035] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff
> pref]
> >> [    1.043410] pci 0000:00:02.0: reg 0x14: [mem 0xf3094000-0xf3094fff]
> >> [    1.100021] pci 0000:00:02.0: reg 0x30: [mem 0xf3080000-0xf308ffff
> pref]
> >> [    1.103759] pci 0000:00:03.0: [5853:0001] type 00 class 0xff8000
> >> [    1.116708] pci 0000:00:03.0: reg 0x10: [io  0xc000-0xc0ff]
> >> [    1.130059] pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff
> pref]
> >> [    1.188018] pci 0000:00:05.0: [1002:6759] type 00 class 0x030000
> >> [    1.213333] pci 0000:00:05.0: reg 0x10: [mem 0xe0000000-0xefffffff
> 64bit pref]
> >> [    1.223372] pci 0000:00:05.0: reg 0x18: [mem 0xf3040000-0xf305ffff
> 64bit]
> >> [    1.230018] pci 0000:00:05.0: reg 0x20: [io  0xc100-0xc1ff]
> >> [    1.250022] pci 0000:00:05.0: reg 0x30: [mem 0xf3060000-0xf307ffff
> pref]
> >> [    1.252053] pci 0000:00:05.0: supports D1 D2
> >> [    1.255355] pci 0000:00:06.0: [1002:aa90] type 00 class 0x040300
> >> [    1.256666] pci 0000:00:06.0: reg 0x10: [mem 0xf3090000-0xf3093fff
> 64bit]
> >> [    1.263333] pci 0000:00:06.0: supports D1 D2
> >> [    1.265953] pci_bus 0000:00: fixups for bus
> >> [    1.266666] pci_bus 0000:00: bus scan returning with max=00
> >> [    1.266666] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
> >> [    1.266666] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> >> [    1.266666] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> >> [    1.266666] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
> >> [    1.270278] ACPI: Enabled 2 GPEs in block 00 to 0F
> >> [    1.273333] ACPI: \_SB_.PCI0: notify handler is installed
> >> [    1.273333] Found 1 acpi root devices
> >> [    1.273333] xen:balloon: Initialising balloon driver
> >> [    1.273433] xen_balloon: Initialising balloon driver
> >> [    1.275068] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> >> [    1.275942] vgaarb: device added:
> PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
> >> [    1.276666] vgaarb: loaded
> >> [    1.276666] vgaarb: bridge control possible 0000:00:05.0
> >> [    1.276666] vgaarb: no bridge control possible 0000:00:02.0
> >> [    1.276666] SCSI subsystem initialized
> >> [    1.276666] libata version 3.00 loaded.
> >> [    1.276666] ACPI: bus type USB registered
> >> [    1.277217] usbcore: registered new interface driver usbfs
> >> [    1.278077] usbcore: registered new interface driver hub
> >> [    1.278077] usbcore: registered new device driver usb
> >> [    1.280325] Linux video capture interface: v2.00
> >> [    1.281514] pps_core: LinuxPPS API ver. 1 registered
> >> [    1.282276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> Giometti <giometti@xxxxxxxx>
> >> [    1.283333] PTP clock support registered
> >> [    1.283333] Advanced Linux Sound Architecture Driver Initialized.
> >> [    1.283333] PCI: Using ACPI for IRQ routing
> >> [    1.283333] PCI: pci_cache_line_size set to 64 bytes
> >> [    1.283333] pci 0000:00:01.1: BAR 0: reserving [io  0x01f0-0x01f7 flags
> 0x110] (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 1: reserving [io  0x03f6 flags 0x110]
> (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 2: reserving [io  0x0170-0x0177
> flags 0x110] (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 3: reserving [io  0x0376 flags 0x110]
> (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.1: BAR 4: reserving [io  0xc260-0xc26f flags
> 0x40101] (d=0, p=0)
> >> [    1.283333] pci 0000:00:01.2: BAR 4: reserving [io  0xc240-0xc25f flags
> 0x40101] (d=0, p=0)
> >> [    1.283333] pci 0000:00:02.0: BAR 0: reserving [mem
> 0xf0000000-0xf1ffffff flags 0x42208] (d=0, p=0)
> >> [    1.283333] pci 0000:00:02.0: BAR 1: reserving [mem
> 0xf3094000-0xf3094fff flags 0x40200] (d=0, p=0)
> >> [    1.283493] pci 0000:00:03.0: BAR 0: reserving [io  0xc000-0xc0ff flags
> 0x40101] (d=0, p=0)
> >> [    1.285517] pci 0000:00:03.0: BAR 1: reserving [mem
> 0xf2000000-0xf2ffffff flags 0x42208] (d=0, p=0)
> >> [    1.286666] pci 0000:00:05.0: BAR 0: reserving [mem
> 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0)
> >> [    1.286666] pci 0000:00:05.0: BAR 2: reserving [mem
> 0xf3040000-0xf305ffff flags 0x140204] (d=0, p=0)
> >> [    1.286666] pci 0000:00:05.0: BAR 4: reserving [io  0xc100-0xc1ff flags
> 0x40101] (d=0, p=0)
> >> [    1.286666] pci 0000:00:06.0: BAR 0: reserving [mem
> 0xf3090000-0xf3093fff flags 0x140204] (d=0, p=0)
> >> [    1.286666] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
> >> [    1.286666] e820: reserve RAM buffer [mem 0x3f7ff000-0x3fffffff]
> >> [    1.286871] Bluetooth: Core ver 2.16
> >> [    1.290033] NET: Registered protocol family 31
> >> [    1.292390] Bluetooth: HCI device and connection manager initialized
> >> [    1.293333] Bluetooth: HCI socket layer initialized
> >> [    1.293333] Bluetooth: L2CAP socket layer initialized
> >> [    1.293333] Bluetooth: SCO socket layer initialized
> >> [    1.293333] HPET: 3 timers in total, 0 timers will be used for per-cpu
> timer
> >> [    1.293333] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> >> [    1.293333] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
> >> [    1.296395] Switched to clocksource xen
> >> [    1.296666] FS-Cache: Loaded
> >> [    1.297469] pnp: PnP ACPI init
> >> [    1.298746] ACPI: bus type PNP registered
> >> [    1.300356] system 00:00: [mem 0x00000000-0x0009ffff] could not be
> reserved
> >> [    1.301894] system 00:00: Plug and Play ACPI device, IDs PNP0c02
> (active)
> >> [    1.303518] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
> >> [    1.305522] system 00:02: [io  0x08a0-0x08a3] has been reserved
> >> [    1.307001] system 00:02: [io  0x0cc0-0x0ccf] has been reserved
> >> [    1.310024] system 00:02: [io  0x04d0-0x04d1] has been reserved
> >> [    1.320627] system 00:02: Plug and Play ACPI device, IDs PNP0c02
> (active)
> >> [    1.351879] pnp 00:03: [dma 4]
> >> [    1.357740] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
> >> [    1.362206] xen: --> pirq=16 -> irq=8 (gsi=8)
> >> [    1.363806] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
> >> [    1.365710] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
> >> [    1.367661] xen: --> pirq=17 -> irq=12 (gsi=12)
> >> [    1.369285] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
> >> [    1.370851] xen: --> pirq=18 -> irq=1 (gsi=1)
> >> [    1.372569] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b
> (active)
> >> [    1.374663] xen: --> pirq=19 -> irq=6 (gsi=6)
> >> [    1.376869] pnp 00:08: [dma 2]
> >> [    1.378403] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
> >> [    1.381042] xen: --> pirq=20 -> irq=4 (gsi=4)
> >> [    1.382981] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
> >> [    1.384588] xen: --> pirq=21 -> irq=7 (gsi=7)
> >> [    1.386128] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
> >> [    1.388124] system 00:0b: [io  0xae00-0xae0f] has been reserved
> >> [    1.389607] system 00:0b: [io  0xb044-0xb047] has been reserved
> >> [    1.391028] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
> (active)
> >> [    1.393084] pnp: PnP ACPI: found 12 devices
> >> [    1.394550] ACPI: bus type PNP unregistered
> >> [    1.413954] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
> >> [    1.415535] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
> >> [    1.417203] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> >> [    1.418685] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfbffffff]
> >> [    1.420210] NET: Registered protocol family 2
> >> [    1.422209] TCP established hash table entries: 8192 (order: 5, 131072
> bytes)
> >> [    1.424041] TCP bind hash table entries: 8192 (order: 7, 524288 bytes)
> >> [    1.426660] TCP: Hash tables configured (established 8192 bind 8192)
> >> [    1.428756] TCP: reno registered
> >> [    1.430133] UDP hash table entries: 512 (order: 4, 81920 bytes)
> >> [    1.431591] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes)
> >> [    1.433355] NET: Registered protocol family 1
> >> [    1.434814] pci 0000:00:00.0: calling quirk_natoma+0x0/0x40
> >> [    1.436159] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> >> [    1.437611] pci 0000:00:00.0: calling quirk_passive_release+0x0/0x90
> >> [    1.439161] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> >> [    1.440771] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x40
> >> [    1.442572] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> >> [    1.444555] pci 0000:00:01.2: calling
> quirk_usb_early_handoff+0x0/0x6c0
> >> [    1.447397] xen: --> pirq=22 -> irq=23 (gsi=23)
> >> [    1.452957] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0
> >> [    1.454614] pci 0000:00:02.0: Boot video device
> >> [    1.456105] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xd0
> >> [    1.457984] pci 0000:00:05.0: Boot video device
> >> [    1.459683] PCI: CLS 0 bytes, default 64
> >> [    1.461462] Trying to unpack rootfs image as initramfs...
> >> [    1.543512] Freeing initrd memory: 4996K (ffff88003762e000 -
> ffff880037b0f000)
> >> [    1.553915] DMA-API: preallocated 65536 debug entries
> >> [    1.555928] DMA-API: debugging enabled by kernel config
> >> [    1.559170] Scanning for low memory corruption every 60 seconds
> >> [    1.564307] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
> >> [    1.568143] audit: initializing netlink socket (disabled)
> >> [    1.569592] type=2000 audit(1379409313.121:1): initialized
> >> [    1.571623] bounce pool size: 64 pages
> >> [    1.572971] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> >> [    1.589346] VFS: Disk quotas dquot_6.5.2
> >> [    1.591062] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> >> [    1.596280] NTFS driver 2.1.30 [Flags: R/W].
> >> [    1.598516] fuse init (API version 7.22)
> >> [    1.601515] bio: create slab <bio-1> at 1
> >> [    1.604032] Btrfs loaded
> >> [    1.606549] GFS2 installed
> >> [    1.608181] ceph: loaded (mds proto 32)
> >> [    1.609650] msgmni has been set to 1946
> >> [    1.612868] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 250)
> >> [    1.615969] io scheduler noop registered
> >> [    1.620128] io scheduler deadline registered
> >> [    1.622091] io scheduler cfq registered (default)
> >> [    1.625114] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
> >> [    1.626889] crc32: self tests passed, processed 225944 bytes in 122522
> nsec
> >> [    1.628486] crc32c: CRC_LE_BITS = 64
> >> [    1.629942] crc32c: self tests passed, processed 225944 bytes in 61570
> nsec
> >> [    1.632530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> >> [    1.634759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> >> [    1.636224] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version:
> 0.2
> >> [    1.638321] cpcihp_generic: Generic port I/O CompactPCI Hot Plug
> Driver version: 0.1
> >> [    1.640530] cpcihp_generic: not configured, disabling.
> >> [    1.642226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> >> [    1.645585] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace
> failed
> >> [    1.648766] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> >> [    1.651005] ACPI: Power Button [PWRF]
> >> [    1.652541] input: Sleep Button as
> /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
> >> [    1.654770] ACPI: Sleep Button [SLPF]
> >> [    1.664469] xen:xen_evtchn: Event-channel device installed
> >> [    1.669021] xen: --> pirq=23 -> irq=28 (gsi=28)
> >> [    1.670635] xen:grant_table: Grant tables using version 1 layout
> >> [    1.672167] Grant table initialized
> >> [    1.676292] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> >> [    1.715980] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
> 16550A
> >> [    1.738514] Linux agpgart interface v0.103
> >> [    1.740804] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180
> seconds, margin is 60 seconds).
> >> [    1.742909] Hangcheck: Using getrawmonotonic().
> >> [    1.744843] [drm] Initialized drm 1.1.0 20060810
> >> [    1.746503] [drm] radeon kernel modesetting enabled.
> >> [    1.747964] [drm:drm_pci_init],
> >> [    1.749911] [drm:drm_get_pci_dev],
> >> [    1.752812] xen: --> pirq=32 -> irq=36 (gsi=36)
> >> [    1.755203] [drm:drm_get_minor],
> >> [    1.757902] [drm:drm_get_minor], new minor assigned 64
> >> [    1.760337] [drm:drm_get_minor],
> >> [    1.762547] [drm:drm_get_minor], new minor assigned 0
> >> [    1.765509] [drm] initializing kernel modesetting (TURKS 0x1002:0x6759
> 0x174B:0xE193).
> >> [    1.767705] [drm] register mmio base: 0xF3040000
> >> [    1.769135] [drm] register mmio size: 131072
> >> [    1.770551] [drm] radeon_atrm_get_bios: failed
> >> [    1.771878] [drm] radeon_acpi_vfct_bios: failed
> >> [    1.773193] [drm] igp_read_bios_from_vram: failed
> >> [    1.774744] [drm:radeon_read_bios], BIOS radeon_read_bios: size:
> 0x8c00 biosiomemstart: 0xf3060000
> >> [    1.777717] [drm] radeon_read_bios: succes
> >> [    1.779057] [drm:radeon_get_bios], BIOS headerstart: 0x2077 bios
> length: 6|8 headerstring 0xc6 0x7c 0x0 0x0
> >> [    1.784874] [drm:radeon_get_bios], COMBIOS detected
> >> [    1.786811] radeon 0000:00:05.0: Expecting atombios for evergreen
> GPU
> >> [    1.788255] radeon 0000:00:05.0: Fatal error during GPU init
> >> [    1.789919] [drm] radeon: finishing device.
> >> [    1.791325] [TTM] Memory type 2 has not been initialized
> >> [    1.799821] [drm:drm_put_minor], release secondary minor 0
> >> [    1.802369] [drm:drm_put_minor], release secondary minor 64
> >> [    1.808466] radeon: probe of 0000:00:05.0 failed with error -22
> >> [    1.840256] [drm:drm_pci_init],
> >> [    1.845669] [drm:drm_get_pci_dev],
> >> [    1.848075] [drm:drm_get_minor],
> >> [    1.850354] [drm:drm_get_minor], new minor assigned 64
> >> [    1.852444] [drm:drm_get_minor],
> >> [    1.854914] [drm:drm_get_minor], new minor assigned 0
> >> [    1.857213] [TTM] Zone  kernel: Available graphics memory: 498238
> kiB
> >> [    1.858995] [TTM] Initializing pool allocator
> >> [    1.860330] [TTM] Initializing DMA pool allocator
> >> [    1.862319] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:5:VGA-1]
> >> [    1.865161] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:5:VGA-1] probed modes :
> >> [    1.867905] [drm:drm_mode_debug_printmodeline], Modeline
> 25:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40
> 0x5
> >> [    1.870749] [drm:drm_mode_debug_printmodeline], Modeline
> 24:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
> >> [    1.873615] [drm:drm_mode_debug_printmodeline], Modeline
> 23:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
> >> [    1.876797] [drm:drm_mode_debug_printmodeline], Modeline
> 22:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
> >> [    1.879705] [drm:drm_mode_debug_printmodeline], Modeline
> 21:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
> >> [    1.882500] [drm:drm_mode_debug_printmodeline], Modeline
> 20:"1280x768" 60 68250 1280 1328 1360 1440 768 771 778 790 0x40 0x9
> >> [    1.885314] [drm:drm_mode_debug_printmodeline], Modeline
> 14:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> >> [    1.888557] [drm:drm_mode_debug_printmodeline], Modeline
> 9:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> >> [    1.891615] [drm:drm_mode_debug_printmodeline], Modeline
> 8:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> >> [    1.894857] [drm:drm_mode_debug_printmodeline], Modeline
> 13:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
> >> [    1.897622] [drm:drm_mode_debug_printmodeline], Modeline
> 6:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
> >> [    1.900401] [drm:drm_setup_crtcs],
> >> [    1.902276] [drm:drm_enable_connectors], connector 5 enabled? yes
> >> [    1.904425] [drm:drm_target_preferred], looking for cmdline mode on
> connector 5
> >> [    1.907019] [drm:drm_target_preferred], looking for preferred mode on
> connector 5
> >> [    1.910214] [drm:drm_target_preferred], found mode 1280x1024
> >> [    1.914217] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
> >> [    1.918064] [drm:drm_setup_crtcs], desired mode 1280x1024 set on
> crtc 3
> >> [    1.922808] [drm:drm_framebuffer_reference], FB ID: 10
> >> [    1.927686] [drm] fb mappable at 0x0
> >> [    1.930020] [drm] vram aper at 0x0
> >> [    1.932487] [drm] size 0
> >> [    1.934735] [drm] fb depth is 24
> >> [    1.936980] [drm]    pitch is 3840
> >> [    1.939982] fbcon: cirrusdrmfb (fb0) is primary device
> >> [    1.941542] [drm:drm_crtc_helper_set_config],
> >> [    1.941546] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [    1.941550] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode
> set
> >> [    1.941553] [drm:drm_crtc_helper_set_config], modes are different, full
> mode set
> >> [    1.941555] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0
> 0 0 0 0 0 0 0 0 0x0 0x0
> >> [    1.941558] [drm:drm_mode_debug_printmodeline], Modeline
> 7:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> >> [    1.941563] [drm:drm_crtc_helper_set_config], encoder changed, full
> mode switch
> >> [    1.941565] [drm:drm_crtc_helper_set_config], crtc changed, full mode
> switch
> >> [    1.941567] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [    1.941569] [drm:drm_crtc_helper_set_config], attempting to set mode
> from userspace
> >> [    1.941572] [drm:drm_mode_debug_printmodeline], Modeline
> 7:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> >> [    1.941577] [drm:drm_crtc_helper_set_mode], [CRTC:3]
> >> [    1.953352] [drm:drm_crtc_helper_set_mode], [ENCODER:4:DAC-4] set
> [MODE:7:1280x1024]
> >> [    1.953355] [drm:drm_calc_timestamping_constants], crtc 3: hwmode:
> htotal 1688, vtotal 1066, vdisplay 1024
> >> [    1.953357] [drm:drm_calc_timestamping_constants], crtc 3: clock
> 108000 kHz framedur 16661185 linedur 15629, pixeldur 9
> >> [    1.953363] [drm:drm_crtc_helper_set_config], Setting connector DPMS
> state to on
> >> [    1.953365] [drm:drm_crtc_helper_set_config],
> [CONNECTOR:5:VGA-1] set DPMS on
> >> [    1.953370] [drm:drm_framebuffer_reference], FB ID: 10
> >> [    1.953487] [drm:drm_crtc_helper_set_config],
> >> [    1.953489] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [    1.953494] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [    1.953497] [drm:drm_framebuffer_reference], FB ID: 10
> >> [    1.953498] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [    2.038647] [drm:drm_crtc_helper_set_config],
> >> [    2.038651] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [    2.038658] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [    2.038661] [drm:drm_framebuffer_reference], FB ID: 10
> >> [    2.038662] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [    2.112460] Console: switching to colour frame buffer device 160x64
> >> [    2.112473] [drm:drm_crtc_helper_set_config],
> >> [    2.112475] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [    2.112482] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [    2.112485] [drm:drm_framebuffer_reference], FB ID: 10
> >> [    2.112487] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [    2.186982] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
> >> [    2.188860] cirrus 0000:00:02.0: registered panic notifier
> >> [    2.190604] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on
> minor 0
> >> [    2.192631] [drm:drm_pci_init],
> >> [    2.198055] brd: module loaded
> >> [    2.203121] loop: module loaded
> >> [    2.224917] tun: Universal TUN/TAP device driver, 1.6
> >> [    2.226696] tun: (C) 1999-2004 Max Krasnyansky
> <maxk@xxxxxxxxxxxx>
> >> [    2.228570] e1000: Intel(R) PRO/1000 Network Driver - version
> 7.3.21-k8-NAPI
> >> [    2.231161] e1000: Copyright (c) 1999-2006 Intel Corporation.
> >> [    2.232932] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> >> [    2.234578] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> >> [    2.237460] igb: Intel(R) Gigabit Ethernet Network Driver - version
> 5.0.5-k
> >> [    2.239198] igb: Copyright (c) 2007-2013 Intel Corporation.
> >> [    2.242370] igbvf: Intel(R) Gigabit Virtual Function Network Driver -
> version 2.0.2-k
> >> [    2.244130] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
> >> [    2.246106] xen_netfront: Initialising Xen virtual ethernet driver
> >> [    2.253510] blkfront: xvda: flush diskcache: enabled; persistent grants:
> enabled; indirect descriptors: enabled;
> >> [    2.259883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> >> [    2.261790] ehci-pci: EHCI PCI platform driver
> >> [    2.264122] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> >> [    2.265913] ohci-pci: OHCI PCI platform driver
> >> [    2.268005] uhci_hcd: USB Universal Host Controller Interface driver
> >> [    2.270950] uhci_hcd 0000:00:01.2: enabling bus mastering
> >> [    2.275656] uhci_hcd 0000:00:01.2: setting latency timer to 64
> >> [    2.278106] uhci_hcd 0000:00:01.2: UHCI Host Controller
> >> [    2.280655]  xvda: xvda1 xvda2 < xvda5 >
> >> [    2.283105] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
> bus number 1
> >> [    2.287868] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c240
> >> [    2.293675] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001
> >> [    2.295560] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> >> [    2.297375] usb usb1: Product: UHCI Host Controller
> >> [    2.299506] usb usb1: Manufacturer: Linux 3.11.0 uhci_hcd
> >> [    2.301365] usb usb1: SerialNumber: 0000:00:01.2
> >> [    2.306128] hub 1-0:1.0: USB hub found
> >> [    2.308175] hub 1-0:1.0: 2 ports detected
> >> [    2.312359] usbcore: registered new interface driver usblp
> >> [    2.314281] usbcore: registered new interface driver usb-storage
> >> [    2.316546] usbcore: registered new interface driver usbserial
> >> [    2.318509] usbcore: registered new interface driver cp210x
> >> [    2.320517] usbserial: USB Serial support registered for cp210x
> >> [    2.322507] usbcore: registered new interface driver cypress_m8
> >> [    2.324603] usbserial: USB Serial support registered for DeLorme
> Earthmate USB
> >> [    2.326707] usbserial: USB Serial support registered for HID->COM
> RS232 Adapter
> >> [    2.329222] usbserial: USB Serial support registered for Nokia CA-42 V2
> Adapter
> >> [    2.332298] usbcore: registered new interface driver mos7720
> >> [    2.334326] usbserial: USB Serial support registered for Moschip 2 port
> adapter
> >> [    2.336296] usbcore: registered new interface driver mos7840
> >> [    2.339334] usbserial: USB Serial support registered for Moschip
> 7840/7820 USB Serial Driver
> >> [    2.341311] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
> at 0x60,0x64 irq 1,12
> >> [    2.372506] serio: i8042 KBD port at 0x60,0x64 irq 1
> >> [    2.374921] serio: i8042 AUX port at 0x60,0x64 irq 12
> >> [    2.377750] mousedev: PS/2 mouse device common for all mice
> >> [    2.383774] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input2
> >> [    2.412740] input: Xen Virtual Keyboard as /devices/virtual/input/input3
> >> [    2.415113] input: Xen Virtual Pointer as /devices/virtual/input/input4
> >> [    2.441217] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> >> [    2.443213] rtc_cmos 00:04: alarms up to one day, 114 bytes nvram,
> hpet irqs
> >> [    2.448798] piix4_smbus 0000:00:01.3: Host SMBus controller not
> enabled!
> >> [    2.451314] lirc_dev: IR Remote Control driver registered, major 248
> >> [    2.453197] IR NEC protocol handler initialized
> >> [    2.454994] IR RC5(x) protocol handler initialized
> >> [    2.456839] IR RC6 protocol handler initialized
> >> [    2.458729] IR JVC protocol handler initialized
> >> [    2.460532] IR Sony protocol handler initialized
> >> [    2.462373] IR RC5 (streamzap) protocol handler initialized
> >> [    2.464199] IR SANYO protocol handler initialized
> >> [    2.465933] IR MCE Keyboard/mouse protocol handler initialized
> >> [    2.467725] IR LIRC bridge handler initialized
> >> [    2.469491] cx25821: driver version 0.0.106 loaded
> >> [    2.471745] usbcore: registered new interface driver pvrusb2
> >> [    2.473480] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2
> MPEG2 Encoder/Tuner
> >> [    2.476532] pvrusb2: Debug mask is 31 (0x1f)
> >> [    2.487290] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
> v0.05
> >> [    2.491295] xen_wdt: Xen WatchDog Timer Driver v0.01
> >> [    2.533305] xen_wdt: initialized (timeout=60s, nowayout=0)
> >> [    2.536002] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised:
> dm-devel@xxxxxxxxxx
> >> [    2.539707] Bluetooth: Virtual HCI driver ver 1.3
> >> [    2.542258] Bluetooth: HCI UART driver ver 2.2
> >> [    2.543999] Bluetooth: HCI H4 protocol initialized
> >> [    2.545664] Bluetooth: HCI BCSP protocol initialized
> >> [    2.547387] Bluetooth: HCILL protocol initialized
> >> [    2.549059] Bluetooth: HCIATH3K protocol initialized
> >> [    2.550848] Bluetooth: HCI Three-wire UART (H5) protocol initialized
> >> [    2.552803] usbcore: registered new interface driver bcm203x
> >> [    2.554723] usbcore: registered new interface driver bpa10x
> >> [    2.556617] usbcore: registered new interface driver bfusb
> >> [    2.559609] usbcore: registered new interface driver btusb
> >> [    2.561628] usbcore: registered new interface driver ath3k
> >> [    2.563188] ioremap error for 0xfc001000-0xfc002000, requested 0x10,
> got 0x0
> >> [    2.565091] hidraw: raw HID events driver (C) Jiri Kosina
> >> [    2.568391] usbcore: registered new interface driver usbhid
> >> [    2.570046] usbhid: USB HID core driver
> >> [    2.574837] xen: --> pirq=33 -> irq=41 (gsi=41)
> >> [    2.578242] snd_hda_intel 0000:00:06.0: xen: msi bound to pirq=87
> >> [    2.579853] snd_hda_intel 0000:00:06.0: xen: msi --> pirq=87 --> irq=80
> >> [    2.600606] usbcore: registered new interface driver snd-usb-audio
> >> [    2.602765] usbcore: registered new interface driver snd-ua101
> >> [    2.604542] usbcore: registered new interface driver snd-usb-usx2y
> >> [    2.606240] usbcore: registered new interface driver snd-usb-caiaq
> >> [    2.607953] usbcore: registered new interface driver snd-usb-6fire
> >> [    2.609590] Netfilter messages via NETLINK v0.30.
> >> [    2.611228] nfnl_acct: registering with nfnetlink.
> >> [    2.613120] nf_conntrack version 0.5.0 (7784 buckets, 31136 max)
> >> [    2.615344] ctnetlink v0.93: registering with nfnetlink.
> >> [    2.618419] xt_time: kernel timezone is -0000
> >> [    2.619979] ip_set: protocol 6
> >> [    2.621538] IPVS: Registered protocols ()
> >> [    2.623258] IPVS: Connection hash table configured (size=4096,
> memory=64Kbytes)
> >> [    2.624923] IPVS: Creating netns size=1904 id=0
> >> [    2.627127] IPVS: ipvs loaded.
> >> [    2.629354] ip_tables: (C) 2000-2006 Netfilter Core Team
> >> [    2.631187] TCP: cubic registered
> >> [    2.632656] NET: Registered protocol family 17
> >> [    2.635367] Bridge firewalling registered
> >> [    2.636897] Ebtables v2.0 registered
> >> [    2.639225] Bluetooth: RFCOMM TTY layer initialized
> >> [    2.640742] Bluetooth: RFCOMM socket layer initialized
> >> [    2.642171] Bluetooth: RFCOMM ver 1.11
> >> [    2.643580] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> >> [    2.645010] Bluetooth: BNEP filters: protocol multicast
> >> [    2.646420] Bluetooth: BNEP socket layer initialized
> >> [    2.647858] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> >> [    2.649294] Bluetooth: HIDP socket layer initialized
> >> [    2.650788] Key type ceph registered
> >> [    2.652389] libceph: loaded (mon/osd proto 15/24)
> >> [    2.654437] registered taskstats version 1
> >> [    2.659955] xenbus_probe_frontend: Device with no driver: device/pci/0
> >> [    2.661879] console [netcon0] enabled
> >> [    2.663446] netconsole: network logging started
> >> [    2.665236] rtc_cmos 00:04: setting system clock to 2013-09-17
> 09:15:15 UTC (1379409315)
> >> [    2.667038] ALSA device list:
> >> [    2.668619]   #0: HD-Audio Generic at 0xf3090000 irq 80
> >> [    2.672662] Freeing unused kernel memory: 1068K (ffffffff81ef0000 -
> ffffffff81ffb000)
> >> [    2.674292] Write protecting the kernel read-only data: 14336k
> >> [    2.679086] Freeing unused kernel memory: 120K (ffff8800019e2000 -
> ffff880001a00000)
> >> [    2.681086] Freeing unused kernel memory: 36K (ffff880001df7000 -
> ffff880001e00000)
> >> [    2.714316] usb 1-1: new full-speed USB device number 2 using uhci_hcd
> >> [    3.034772] usb 1-1: New USB device found, idVendor=0627,
> idProduct=0001
> >> [    3.036432] usb 1-1: New USB device strings: Mfr=1, Product=3,
> SerialNumber=5
> >> [    3.038495] usb 1-1: Product: QEMU USB Tablet
> >> [    3.040085] usb 1-1: Manufacturer: QEMU
> >> [    3.041644] usb 1-1: SerialNumber: 42
> >> [    3.071432] input: QEMU QEMU USB Tablet as
> /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input5
> >> [    3.074317] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID
> v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
> >> [    3.205535] input: ImExPS/2 Generic Explorer Mouse as
> /devices/platform/i8042/serio1/input/input6
> >> [    3.243471] EXT4-fs (xvda1): mounted filesystem with ordered data
> mode. Opts: (null)
> >> [    5.744943] udevd[1591]: starting version 175
> >> [   10.475221] Adding 901116k swap on /dev/xvda5.  Priority:-1 extents:1
> across:901116k SS
> >> [   10.505906] EXT4-fs (xvda1): re-mounted. Opts: (null)
> >> [   10.852323] EXT4-fs (xvda1): re-mounted. Opts: errors=remount-ro
> >> [   13.589186] [drm:drm_crtc_helper_set_config],
> >> [   13.589188] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   13.589200] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   13.589203] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   13.589204] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.219989] [drm:drm_crtc_helper_set_config],
> >> [   19.219992] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.220008] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.220010] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.220011] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.291242] [drm:drm_stub_open],
> >> [   19.291251] [drm:drm_open_helper], pid = 4078, minor = 0
> >> [   19.291258] [drm:drm_setup],
> >> [   19.291282] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291343] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291356] [drm:drm_release], open_count = 1
> >> [   19.291358] [drm:drm_release], pid = 4078, device = 0xe200,
> open_count = 1
> >> [   19.291456] [drm:drm_lastclose],
> >> [   19.291458] [drm:drm_lastclose], driver lastclose completed
> >> [   19.291461] [drm:drm_lastclose], lastclose completed
> >> [   19.291477] [drm:drm_stub_open],
> >> [   19.291479] [drm:drm_open_helper], pid = 4078, minor = 0
> >> [   19.291483] [drm:drm_setup],
> >> [   19.291486] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291489] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291494] [drm:drm_release], open_count = 1
> >> [   19.291495] [drm:drm_release], pid = 4078, device = 0xe200,
> open_count = 1
> >> [   19.291499] [drm:drm_lastclose],
> >> [   19.291500] [drm:drm_lastclose], driver lastclose completed
> >> [   19.291502] [drm:drm_lastclose], lastclose completed
> >> [   19.291518] [drm:drm_stub_open],
> >> [   19.291521] [drm:drm_open_helper], pid = 4078, minor = 0
> >> [   19.291524] [drm:drm_setup],
> >> [   19.291527] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291530] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291535] [drm:drm_release], open_count = 1
> >> [   19.291536] [drm:drm_release], pid = 4078, device = 0xe200,
> open_count = 1
> >> [   19.291540] [drm:drm_lastclose],
> >> [   19.291541] [drm:drm_lastclose], driver lastclose completed
> >> [   19.291543] [drm:drm_lastclose], lastclose completed
> >> [   19.291551] [drm:drm_stub_open],
> >> [   19.291554] [drm:drm_open_helper], pid = 4078, minor = 0
> >> [   19.291557] [drm:drm_setup],
> >> [   19.291560] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291563] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291567] [drm:drm_release], open_count = 1
> >> [   19.291569] [drm:drm_release], pid = 4078, device = 0xe200,
> open_count = 1
> >> [   19.291572] [drm:drm_lastclose],
> >> [   19.291573] [drm:drm_lastclose], driver lastclose completed
> >> [   19.291575] [drm:drm_lastclose], lastclose completed
> >> [   19.291587] [drm:drm_stub_open],
> >> [   19.291589] [drm:drm_open_helper], pid = 4078, minor = 0
> >> [   19.291593] [drm:drm_setup],
> >> [   19.291595] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291598] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291603] [drm:drm_release], open_count = 1
> >> [   19.291604] [drm:drm_release], pid = 4078, device = 0xe200,
> open_count = 1
> >> [   19.291608] [drm:drm_lastclose],
> >> [   19.291609] [drm:drm_lastclose], driver lastclose completed
> >> [   19.291611] [drm:drm_lastclose], lastclose completed
> >> [   19.291620] [drm:drm_stub_open],
> >> [   19.291622] [drm:drm_open_helper], pid = 4078, minor = 0
> >> [   19.291626] [drm:drm_setup],
> >> [   19.291628] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291631] [drm:drm_ioctl], pid=4078, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.291636] [drm:drm_release], open_count = 1
> >> [   19.291637] [drm:drm_release], pid = 4078, device = 0xe200,
> open_count = 1
> >> [   19.291641] [drm:drm_lastclose],
> >> [   19.291642] [drm:drm_lastclose], driver lastclose completed
> >> [   19.291644] [drm:drm_lastclose], lastclose completed
> >> [   19.302299] [drm:drm_crtc_helper_set_config],
> >> [   19.302302] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.302311] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.302313] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.302314] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.302317] [drm:drm_crtc_helper_set_config],
> >> [   19.302318] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.302321] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.302325] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.302326] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.302341] [drm:drm_crtc_helper_set_config],
> >> [   19.302343] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.302345] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.302347] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.302348] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.514543] [drm:drm_crtc_helper_set_config],
> >> [   19.514546] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.514558] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.514561] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.514563] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.585682] [drm:drm_stub_open],
> >> [   19.585691] [drm:drm_open_helper], pid = 4090, minor = 0
> >> [   19.585698] [drm:drm_setup],
> >> [   19.585714] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585723] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585736] [drm:drm_release], open_count = 1
> >> [   19.585737] [drm:drm_release], pid = 4090, device = 0xe200,
> open_count = 1
> >> [   19.585744] [drm:drm_lastclose],
> >> [   19.585746] [drm:drm_lastclose], driver lastclose completed
> >> [   19.585749] [drm:drm_lastclose], lastclose completed
> >> [   19.585761] [drm:drm_stub_open],
> >> [   19.585763] [drm:drm_open_helper], pid = 4090, minor = 0
> >> [   19.585767] [drm:drm_setup],
> >> [   19.585770] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585773] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585778] [drm:drm_release], open_count = 1
> >> [   19.585779] [drm:drm_release], pid = 4090, device = 0xe200,
> open_count = 1
> >> [   19.585783] [drm:drm_lastclose],
> >> [   19.585784] [drm:drm_lastclose], driver lastclose completed
> >> [   19.585786] [drm:drm_lastclose], lastclose completed
> >> [   19.585802] [drm:drm_stub_open],
> >> [   19.585805] [drm:drm_open_helper], pid = 4090, minor = 0
> >> [   19.585808] [drm:drm_setup],
> >> [   19.585811] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585814] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585819] [drm:drm_release], open_count = 1
> >> [   19.585820] [drm:drm_release], pid = 4090, device = 0xe200,
> open_count = 1
> >> [   19.585824] [drm:drm_lastclose],
> >> [   19.585825] [drm:drm_lastclose], driver lastclose completed
> >> [   19.585828] [drm:drm_lastclose], lastclose completed
> >> [   19.585846] [drm:drm_stub_open],
> >> [   19.585847] [drm:drm_open_helper], pid = 4090, minor = 0
> >> [   19.585851] [drm:drm_setup],
> >> [   19.585853] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585856] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585860] [drm:drm_release], open_count = 1
> >> [   19.585861] [drm:drm_release], pid = 4090, device = 0xe200,
> open_count = 1
> >> [   19.585864] [drm:drm_lastclose],
> >> [   19.585865] [drm:drm_lastclose], driver lastclose completed
> >> [   19.585867] [drm:drm_lastclose], lastclose completed
> >> [   19.585878] [drm:drm_stub_open],
> >> [   19.585880] [drm:drm_open_helper], pid = 4090, minor = 0
> >> [   19.585883] [drm:drm_setup],
> >> [   19.585885] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585888] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585892] [drm:drm_release], open_count = 1
> >> [   19.585893] [drm:drm_release], pid = 4090, device = 0xe200,
> open_count = 1
> >> [   19.585896] [drm:drm_lastclose],
> >> [   19.585898] [drm:drm_lastclose], driver lastclose completed
> >> [   19.585899] [drm:drm_lastclose], lastclose completed
> >> [   19.585907] [drm:drm_stub_open],
> >> [   19.585909] [drm:drm_open_helper], pid = 4090, minor = 0
> >> [   19.585913] [drm:drm_setup],
> >> [   19.585915] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585918] [drm:drm_ioctl], pid=4090, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.585921] [drm:drm_release], open_count = 1
> >> [   19.585923] [drm:drm_release], pid = 4090, device = 0xe200,
> open_count = 1
> >> [   19.585926] [drm:drm_lastclose],
> >> [   19.585927] [drm:drm_lastclose], driver lastclose completed
> >> [   19.585929] [drm:drm_lastclose], lastclose completed
> >> [   19.586613] [drm:drm_crtc_helper_set_config],
> >> [   19.586615] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.586620] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.586622] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.586624] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.586626] [drm:drm_crtc_helper_set_config],
> >> [   19.586627] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.586630] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.586631] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.586632] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.586653] [drm:drm_crtc_helper_set_config],
> >> [   19.586654] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.586660] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.586662] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.586663] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.763917] [drm:drm_crtc_helper_set_config],
> >> [   19.763919] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.763931] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.763933] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.763934] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.837433] [drm:drm_stub_open],
> >> [   19.837441] [drm:drm_open_helper], pid = 4093, minor = 0
> >> [   19.837449] [drm:drm_setup],
> >> [   19.837466] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837476] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837488] [drm:drm_release], open_count = 1
> >> [   19.837490] [drm:drm_release], pid = 4093, device = 0xe200,
> open_count = 1
> >> [   19.837496] [drm:drm_lastclose],
> >> [   19.837498] [drm:drm_lastclose], driver lastclose completed
> >> [   19.837501] [drm:drm_lastclose], lastclose completed
> >> [   19.837513] [drm:drm_stub_open],
> >> [   19.837515] [drm:drm_open_helper], pid = 4093, minor = 0
> >> [   19.837519] [drm:drm_setup],
> >> [   19.837522] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837525] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837529] [drm:drm_release], open_count = 1
> >> [   19.837531] [drm:drm_release], pid = 4093, device = 0xe200,
> open_count = 1
> >> [   19.837534] [drm:drm_lastclose],
> >> [   19.837536] [drm:drm_lastclose], driver lastclose completed
> >> [   19.837538] [drm:drm_lastclose], lastclose completed
> >> [   19.837560] [drm:drm_stub_open],
> >> [   19.837563] [drm:drm_open_helper], pid = 4093, minor = 0
> >> [   19.837567] [drm:drm_setup],
> >> [   19.837570] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837573] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837577] [drm:drm_release], open_count = 1
> >> [   19.837579] [drm:drm_release], pid = 4093, device = 0xe200,
> open_count = 1
> >> [   19.837582] [drm:drm_lastclose],
> >> [   19.837584] [drm:drm_lastclose], driver lastclose completed
> >> [   19.837585] [drm:drm_lastclose], lastclose completed
> >> [   19.837594] [drm:drm_stub_open],
> >> [   19.837596] [drm:drm_open_helper], pid = 4093, minor = 0
> >> [   19.837600] [drm:drm_setup],
> >> [   19.837603] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837606] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837610] [drm:drm_release], open_count = 1
> >> [   19.837612] [drm:drm_release], pid = 4093, device = 0xe200,
> open_count = 1
> >> [   19.837615] [drm:drm_lastclose],
> >> [   19.837616] [drm:drm_lastclose], driver lastclose completed
> >> [   19.837618] [drm:drm_lastclose], lastclose completed
> >> [   19.837629] [drm:drm_stub_open],
> >> [   19.837631] [drm:drm_open_helper], pid = 4093, minor = 0
> >> [   19.837635] [drm:drm_setup],
> >> [   19.837638] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837641] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837645] [drm:drm_release], open_count = 1
> >> [   19.837647] [drm:drm_release], pid = 4093, device = 0xe200,
> open_count = 1
> >> [   19.837650] [drm:drm_lastclose],
> >> [   19.837651] [drm:drm_lastclose], driver lastclose completed
> >> [   19.837653] [drm:drm_lastclose], lastclose completed
> >> [   19.837662] [drm:drm_stub_open],
> >> [   19.837664] [drm:drm_open_helper], pid = 4093, minor = 0
> >> [   19.837668] [drm:drm_setup],
> >> [   19.837671] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837674] [drm:drm_ioctl], pid=4093, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   19.837678] [drm:drm_release], open_count = 1
> >> [   19.837680] [drm:drm_release], pid = 4093, device = 0xe200,
> open_count = 1
> >> [   19.837683] [drm:drm_lastclose],
> >> [   19.837685] [drm:drm_lastclose], driver lastclose completed
> >> [   19.837686] [drm:drm_lastclose], lastclose completed
> >> [   19.838347] [drm:drm_crtc_helper_set_config],
> >> [   19.838349] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.838355] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.838358] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.838359] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.838361] [drm:drm_crtc_helper_set_config],
> >> [   19.838363] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.838365] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.838367] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.838368] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   19.838382] [drm:drm_crtc_helper_set_config],
> >> [   19.838383] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   19.838385] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   19.838387] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   19.838388] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.047717] [drm:drm_crtc_helper_set_config],
> >> [   20.047720] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.047727] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.047730] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.047731] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.133510] [drm:drm_stub_open],
> >> [   20.133519] [drm:drm_open_helper], pid = 4096, minor = 0
> >> [   20.133528] [drm:drm_setup],
> >> [   20.133547] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133558] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133576] [drm:drm_release], open_count = 1
> >> [   20.133578] [drm:drm_release], pid = 4096, device = 0xe200,
> open_count = 1
> >> [   20.133585] [drm:drm_lastclose],
> >> [   20.133587] [drm:drm_lastclose], driver lastclose completed
> >> [   20.133590] [drm:drm_lastclose], lastclose completed
> >> [   20.133604] [drm:drm_stub_open],
> >> [   20.133606] [drm:drm_open_helper], pid = 4096, minor = 0
> >> [   20.133610] [drm:drm_setup],
> >> [   20.133613] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133616] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133621] [drm:drm_release], open_count = 1
> >> [   20.133623] [drm:drm_release], pid = 4096, device = 0xe200,
> open_count = 1
> >> [   20.133626] [drm:drm_lastclose],
> >> [   20.133628] [drm:drm_lastclose], driver lastclose completed
> >> [   20.133630] [drm:drm_lastclose], lastclose completed
> >> [   20.133646] [drm:drm_stub_open],
> >> [   20.133648] [drm:drm_open_helper], pid = 4096, minor = 0
> >> [   20.133652] [drm:drm_setup],
> >> [   20.133655] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133658] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133662] [drm:drm_release], open_count = 1
> >> [   20.133664] [drm:drm_release], pid = 4096, device = 0xe200,
> open_count = 1
> >> [   20.133668] [drm:drm_lastclose],
> >> [   20.133669] [drm:drm_lastclose], driver lastclose completed
> >> [   20.133671] [drm:drm_lastclose], lastclose completed
> >> [   20.133680] [drm:drm_stub_open],
> >> [   20.133682] [drm:drm_open_helper], pid = 4096, minor = 0
> >> [   20.133686] [drm:drm_setup],
> >> [   20.133688] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133691] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133696] [drm:drm_release], open_count = 1
> >> [   20.133697] [drm:drm_release], pid = 4096, device = 0xe200,
> open_count = 1
> >> [   20.133700] [drm:drm_lastclose],
> >> [   20.133702] [drm:drm_lastclose], driver lastclose completed
> >> [   20.133704] [drm:drm_lastclose], lastclose completed
> >> [   20.133715] [drm:drm_stub_open],
> >> [   20.133718] [drm:drm_open_helper], pid = 4096, minor = 0
> >> [   20.133721] [drm:drm_setup],
> >> [   20.133724] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133727] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133731] [drm:drm_release], open_count = 1
> >> [   20.133733] [drm:drm_release], pid = 4096, device = 0xe200,
> open_count = 1
> >> [   20.133736] [drm:drm_lastclose],
> >> [   20.133738] [drm:drm_lastclose], driver lastclose completed
> >> [   20.133740] [drm:drm_lastclose], lastclose completed
> >> [   20.133749] [drm:drm_stub_open],
> >> [   20.133751] [drm:drm_open_helper], pid = 4096, minor = 0
> >> [   20.133754] [drm:drm_setup],
> >> [   20.133757] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133760] [drm:drm_ioctl], pid=4096, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.133764] [drm:drm_release], open_count = 1
> >> [   20.133766] [drm:drm_release], pid = 4096, device = 0xe200,
> open_count = 1
> >> [   20.133769] [drm:drm_lastclose],
> >> [   20.133771] [drm:drm_lastclose], driver lastclose completed
> >> [   20.133773] [drm:drm_lastclose], lastclose completed
> >> [   20.134412] [drm:drm_crtc_helper_set_config],
> >> [   20.134413] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.134420] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.134422] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.134423] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.134426] [drm:drm_crtc_helper_set_config],
> >> [   20.134427] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.134429] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.134431] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.134432] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.134445] [drm:drm_crtc_helper_set_config],
> >> [   20.134446] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.134449] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.134450] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.134451] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.316278] [drm:drm_crtc_helper_set_config],
> >> [   20.316280] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.316287] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.316290] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.316291] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.392394] [drm:drm_stub_open],
> >> [   20.392411] [drm:drm_open_helper], pid = 4099, minor = 0
> >> [   20.392418] [drm:drm_setup],
> >> [   20.392437] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392447] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392460] [drm:drm_release], open_count = 1
> >> [   20.392462] [drm:drm_release], pid = 4099, device = 0xe200,
> open_count = 1
> >> [   20.392468] [drm:drm_lastclose],
> >> [   20.392470] [drm:drm_lastclose], driver lastclose completed
> >> [   20.392472] [drm:drm_lastclose], lastclose completed
> >> [   20.392485] [drm:drm_stub_open],
> >> [   20.392488] [drm:drm_open_helper], pid = 4099, minor = 0
> >> [   20.392491] [drm:drm_setup],
> >> [   20.392494] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392497] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392502] [drm:drm_release], open_count = 1
> >> [   20.392503] [drm:drm_release], pid = 4099, device = 0xe200,
> open_count = 1
> >> [   20.392507] [drm:drm_lastclose],
> >> [   20.392508] [drm:drm_lastclose], driver lastclose completed
> >> [   20.392510] [drm:drm_lastclose], lastclose completed
> >> [   20.392527] [drm:drm_stub_open],
> >> [   20.392529] [drm:drm_open_helper], pid = 4099, minor = 0
> >> [   20.392533] [drm:drm_setup],
> >> [   20.392536] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392539] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392543] [drm:drm_release], open_count = 1
> >> [   20.392545] [drm:drm_release], pid = 4099, device = 0xe200,
> open_count = 1
> >> [   20.392548] [drm:drm_lastclose],
> >> [   20.392550] [drm:drm_lastclose], driver lastclose completed
> >> [   20.392551] [drm:drm_lastclose], lastclose completed
> >> [   20.392560] [drm:drm_stub_open],
> >> [   20.392562] [drm:drm_open_helper], pid = 4099, minor = 0
> >> [   20.392566] [drm:drm_setup],
> >> [   20.392569] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392572] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392576] [drm:drm_release], open_count = 1
> >> [   20.392578] [drm:drm_release], pid = 4099, device = 0xe200,
> open_count = 1
> >> [   20.392581] [drm:drm_lastclose],
> >> [   20.392582] [drm:drm_lastclose], driver lastclose completed
> >> [   20.392584] [drm:drm_lastclose], lastclose completed
> >> [   20.392595] [drm:drm_stub_open],
> >> [   20.392598] [drm:drm_open_helper], pid = 4099, minor = 0
> >> [   20.392601] [drm:drm_setup],
> >> [   20.392604] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392607] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392611] [drm:drm_release], open_count = 1
> >> [   20.392613] [drm:drm_release], pid = 4099, device = 0xe200,
> open_count = 1
> >> [   20.392616] [drm:drm_lastclose],
> >> [   20.392618] [drm:drm_lastclose], driver lastclose completed
> >> [   20.392620] [drm:drm_lastclose], lastclose completed
> >> [   20.392629] [drm:drm_stub_open],
> >> [   20.392631] [drm:drm_open_helper], pid = 4099, minor = 0
> >> [   20.392635] [drm:drm_setup],
> >> [   20.392637] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392640] [drm:drm_ioctl], pid=4099, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.392644] [drm:drm_release], open_count = 1
> >> [   20.392646] [drm:drm_release], pid = 4099, device = 0xe200,
> open_count = 1
> >> [   20.392649] [drm:drm_lastclose],
> >> [   20.392651] [drm:drm_lastclose], driver lastclose completed
> >> [   20.392653] [drm:drm_lastclose], lastclose completed
> >> [   20.393266] [drm:drm_crtc_helper_set_config],
> >> [   20.393268] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.393274] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.393276] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.393277] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.393279] [drm:drm_crtc_helper_set_config],
> >> [   20.393280] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.393283] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.393284] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.393285] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.393298] [drm:drm_crtc_helper_set_config],
> >> [   20.393299] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.393301] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.393303] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.393303] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.575204] [drm:drm_crtc_helper_set_config],
> >> [   20.575206] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.575213] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.575215] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.575216] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.654491] [drm:drm_stub_open],
> >> [   20.654500] [drm:drm_open_helper], pid = 4102, minor = 0
> >> [   20.654508] [drm:drm_setup],
> >> [   20.654524] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654534] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654551] [drm:drm_release], open_count = 1
> >> [   20.654553] [drm:drm_release], pid = 4102, device = 0xe200,
> open_count = 1
> >> [   20.654562] [drm:drm_lastclose],
> >> [   20.654566] [drm:drm_lastclose], driver lastclose completed
> >> [   20.654570] [drm:drm_lastclose], lastclose completed
> >> [   20.654589] [drm:drm_stub_open],
> >> [   20.654591] [drm:drm_open_helper], pid = 4102, minor = 0
> >> [   20.654595] [drm:drm_setup],
> >> [   20.654598] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654601] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654605] [drm:drm_release], open_count = 1
> >> [   20.654607] [drm:drm_release], pid = 4102, device = 0xe200,
> open_count = 1
> >> [   20.654611] [drm:drm_lastclose],
> >> [   20.654612] [drm:drm_lastclose], driver lastclose completed
> >> [   20.654614] [drm:drm_lastclose], lastclose completed
> >> [   20.654629] [drm:drm_stub_open],
> >> [   20.654631] [drm:drm_open_helper], pid = 4102, minor = 0
> >> [   20.654635] [drm:drm_setup],
> >> [   20.654638] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654641] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654645] [drm:drm_release], open_count = 1
> >> [   20.654647] [drm:drm_release], pid = 4102, device = 0xe200,
> open_count = 1
> >> [   20.654650] [drm:drm_lastclose],
> >> [   20.654652] [drm:drm_lastclose], driver lastclose completed
> >> [   20.654654] [drm:drm_lastclose], lastclose completed
> >> [   20.654662] [drm:drm_stub_open],
> >> [   20.654665] [drm:drm_open_helper], pid = 4102, minor = 0
> >> [   20.654668] [drm:drm_setup],
> >> [   20.654671] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654674] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654678] [drm:drm_release], open_count = 1
> >> [   20.654680] [drm:drm_release], pid = 4102, device = 0xe200,
> open_count = 1
> >> [   20.654683] [drm:drm_lastclose],
> >> [   20.654685] [drm:drm_lastclose], driver lastclose completed
> >> [   20.654687] [drm:drm_lastclose], lastclose completed
> >> [   20.654697] [drm:drm_stub_open],
> >> [   20.654700] [drm:drm_open_helper], pid = 4102, minor = 0
> >> [   20.654703] [drm:drm_setup],
> >> [   20.654706] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654709] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654713] [drm:drm_release], open_count = 1
> >> [   20.654715] [drm:drm_release], pid = 4102, device = 0xe200,
> open_count = 1
> >> [   20.654718] [drm:drm_lastclose],
> >> [   20.654720] [drm:drm_lastclose], driver lastclose completed
> >> [   20.654722] [drm:drm_lastclose], lastclose completed
> >> [   20.654730] [drm:drm_stub_open],
> >> [   20.654733] [drm:drm_open_helper], pid = 4102, minor = 0
> >> [   20.654736] [drm:drm_setup],
> >> [   20.654739] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654742] [drm:drm_ioctl], pid=4102, dev=0xe200, auth=1,
> DRM_IOCTL_GET_UNIQUE
> >> [   20.654746] [drm:drm_release], open_count = 1
> >> [   20.654748] [drm:drm_release], pid = 4102, device = 0xe200,
> open_count = 1
> >> [   20.654751] [drm:drm_lastclose],
> >> [   20.654753] [drm:drm_lastclose], driver lastclose completed
> >> [   20.654755] [drm:drm_lastclose], lastclose completed
> >> [   20.655318] [drm:drm_crtc_helper_set_config],
> >> [   20.655320] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.655326] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.655328] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.655329] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.655331] [drm:drm_crtc_helper_set_config],
> >> [   20.655332] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.655334] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.655336] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.655337] [drm:drm_framebuffer_unreference], FB ID: 10
> >> [   20.655350] [drm:drm_crtc_helper_set_config],
> >> [   20.655351] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:10]
> #connectors=1 (x y) (0 0)
> >> [   20.655353] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:VGA-1]
> to [CRTC:3]
> >> [   20.655355] [drm:drm_framebuffer_reference], FB ID: 10
> >> [   20.655356] [drm:drm_framebuffer_unreference], FB ID: 10
> 
> >> 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RD890
> Northbridge only single slot PCI-e GFX Hydra part [1002:5a11] (rev 02)
> >>       Subsystem: Advanced Micro Devices [AMD] nee ATI RD890
> Northbridge only single slot PCI-e GFX Hydra part [1002:5a11]
> >>       Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> >>       Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [c4] HyperTransport: Slave or Primary Interface
> >>               Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir-
> DUL-
> >>               Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> >>               Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit
> DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> >>               Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> >>               Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut-
> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> >>               Revision ID: 3.00
> >>               Link Frequency 0: [b]
> >>               Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> >>               Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
> >>               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT-
> 64bA+ UIDRD-
> >>               Link Frequency 1: 200MHz
> >>               Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> >>               Link Frequency Capability 1: 200MHz- 300MHz- 400MHz-
> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >>               Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE-
> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> >>               Prefetchable memory behind bridge Upper: 00-00
> >>               Bus Number: 00
> >>       Capabilities: [40] HyperTransport: Retry Mode
> >>       Capabilities: [54] HyperTransport: UnitID Clumping
> >>       Capabilities: [9c] HyperTransport: #1a
> >>       Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
> >>               Address: 00000000  Data: 0000
> >>
> >> 00:00.2 IOMMU [0806]: Advanced Micro Devices [AMD] nee ATI RD990 I/O
> Memory Management Unit (IOMMU) [1002:5a23]
> >>       Subsystem: Advanced Micro Devices [AMD] nee ATI RD990 I/O
> Memory Management Unit (IOMMU) [1002:5a23]
> >>       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>       Interrupt: pin A routed to IRQ 10
> >>       Capabilities: [40] Secure device <?>
> >>       Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee0100c  Data: 4128
> >>       Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
> >>
> >> 00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal
> decode])
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
> >>       I/O behind bridge: 0000e000-0000efff
> >>       Memory behind bridge: fa000000-fe9fffff
> >>       Prefetchable memory behind bridge:
> 00000000d0000000-00000000dfffffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #1, PowerLimit 25.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:03.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (PCI express gpp port C) [1002:5a17] (prog-if 00 [Normal
> decode])
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
> >>       I/O behind bridge: 0000d000-0000dfff
> >>       Memory behind bridge: f9f00000-f9ffffff
> >>       Prefetchable memory behind bridge:
> 00000000c0000000-00000000cfffffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt+
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #3, PowerLimit 25.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal
> decode])
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
> >>       I/O behind bridge: 0000c000-0000cfff
> >>       Memory behind bridge: f9e00000-f9efffff
> >>       Prefetchable memory behind bridge:
> 00000000bff00000-00000000bfffffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #5, PowerLimit 75.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal
> decode])
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
> >>       I/O behind bridge: 0000b000-0000bfff
> >>       Memory behind bridge: f9d00000-f9dfffff
> >>       Prefetchable memory behind bridge:
> 00000000bfe00000-00000000bfefffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #6, PowerLimit 75.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal
> decode])
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
> >>       I/O behind bridge: 0000f000-00000fff
> >>       Memory behind bridge: f9c00000-f9cfffff
> >>       Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #9, PowerLimit 75.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal
> decode])
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
> >>       I/O behind bridge: 0000f000-00000fff
> >>       Memory behind bridge: f9a00000-f9bfffff
> >>       Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #2, PowerLimit 75.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
> >>       I/O behind bridge: 0000a000-0000afff
> >>       Memory behind bridge: f9900000-f99fffff
> >>       Prefetchable memory behind bridge:
> 00000000a0000000-00000000afffffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #5, PowerLimit 25.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:0c.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890S
> PCI Express bridge for GPP2 port 1 [1002:5a20] (prog-if 00 [Normal decode])
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
> >>       I/O behind bridge: 0000f000-00000fff
> >>       Memory behind bridge: f9800000-f98fffff
> >>       Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #6, PowerLimit 11.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:0d.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890
> PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal
> decode])
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> >>       I/O behind bridge: 0000f000-00000fff
> >>       Memory behind bridge: f9700000-f97fffff
> >>       Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1,
> Latency L0 <1us, L1 <8us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt+ ABWMgmt+
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #4, PowerLimit 75.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
> >>                       Changed: MRL- PresDet+ LinkState+
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd+
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>               Address: fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:5a11]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [190 v1] Access Control Services
> >>               ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans+
> >>               ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+
> UpstreamFwd+ EgressCtrl- DirectTrans-
> >>       Kernel driver in use: pcieport
> >>
> >> 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if
> 01 [AHCI 1.0])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 128
> >>       Region 0: I/O ports at 6000 [size=8]
> >>       Region 1: I/O ports at 5000 [size=4]
> >>       Region 2: I/O ports at 3000 [size=8]
> >>       Region 3: I/O ports at 2000 [size=4]
> >>       Region 4: I/O ports at 1000 [size=16]
> >>       Region 5: Memory at f95ff000 (32-bit, non-prefetchable) [size=1K]
> >>       Capabilities: [50] MSI: Enable+ Count=1/8 Maskable- 64bit+
> >>               Address: 00000000fee0100c  Data: 4000
> >>       Capabilities: [70] SATA HBA v1.0 InCfgSpace
> >>       Capabilities: [a4] PCI Advanced Features
> >>               AFCap: TP+ FLR+
> >>               AFCtrl: FLR-
> >>               AFStatus: TP-
> >>       Kernel driver in use: ahci
> >>
> >> 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 18
> >>       Region 0: Memory at f95f7000 (32-bit, non-prefetchable) [size=4K]
> >>       Kernel driver in use: ohci-pci
> >>
> >> 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin B routed to IRQ 17
> >>       Region 0: Memory at f95ff400 (32-bit, non-prefetchable) [size=256]
> >>       Capabilities: [c0] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>               Bridge: PM- B3+
> >>       Capabilities: [e4] Debug port: BAR=1 offset=00e0
> >>       Kernel driver in use: ehci-pci
> >>
> >> 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 18
> >>       Region 0: Memory at f95fc000 (32-bit, non-prefetchable) [size=4K]
> >>       Kernel driver in use: ohci-pci
> >>
> >> 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin B routed to IRQ 17
> >>       Region 0: Memory at f95ff800 (32-bit, non-prefetchable) [size=256]
> >>       Capabilities: [c0] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>               Bridge: PM- B3+
> >>       Capabilities: [e4] Debug port: BAR=1 offset=00e0
> >>       Kernel driver in use: ehci-pci
> >>
> >> 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
> Controller [1002:4385] (rev 41)
> >>       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> >>       Status: Cap- 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Kernel driver in use: piix4_smbus
> >>
> >> 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00
> Azalia (Intel HDA) [1002:4383] (rev 40)
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 16
> >>       Region 0: Memory at f95f8000 (64-bit, non-prefetchable) [size=16K]
> >>       Capabilities: [50] Power Management version 2
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Kernel driver in use: snd_hda_intel
> >>
> >> 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>
> >> 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI
> to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
> >>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64
> >>       Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
> >>       I/O behind bridge: 00009000-00009fff
> >>       Memory behind bridge: fff00000-000fffff
> >>       Prefetchable memory behind bridge: fff00000-000fffff
> >>       Secondary status: 66MHz- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>
> >> 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin C routed to IRQ 18
> >>       Region 0: Memory at f95fd000 (32-bit, non-prefetchable) [size=4K]
> >>       Kernel driver in use: ohci-pci
> >>
> >> 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI
> SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00
> [Normal decode])
> >>       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> >>       I/O behind bridge: 0000f000-00000fff
> >>       Memory behind bridge: fff00000-000fffff
> >>       Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> >>       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag+ RBE+ FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 128 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep+ BwNot+
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surprise-
> >>                       Slot #32, PowerLimit 75.000W; Interlock-
> NoCompl+
> >>               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
> HPIrq- LinkChg-
> >>                       Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
> >>               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
> >>                       Changed: MRL- PresDet- LinkState-
> >>               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
> >>               RootCap: CRSVisible-
> >>               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+ ARIFwd-
> >>               DevCtl2: Completion Timeout: 65ms to 210ms,
> TimeoutDis- ARIFwd-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -3.5dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee3f00c  Data: 4000
> >>       Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee
> ATI Device [1002:0000]
> >>       Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Kernel driver in use: pcieport
> >>
> >> 00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 18
> >>       Region 0: Memory at f95fe000 (32-bit, non-prefetchable) [size=4K]
> >>       Kernel driver in use: ohci-pci
> >>
> >> 00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
> SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64, Cache Line Size: 64 bytes
> >>       Interrupt: pin B routed to IRQ 17
> >>       Region 0: Memory at f95ffc00 (32-bit, non-prefetchable) [size=256]
> >>       Capabilities: [c0] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>               Bridge: PM- B3+
> >>       Capabilities: [e4] Debug port: BAR=1 offset=00e0
> >>       Kernel driver in use: ehci-pci
> >>
> >> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
> Processor HyperTransport Configuration [1022:1200]
> >>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Capabilities: [80] HyperTransport: Host or Secondary Interface
> >>               Command: WarmRst+ DblEnd- DevNum=0 ChainSide-
> HostHide+ Slave- <EOCErr- DUL-
> >>               Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >>               Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut-
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> >>               Revision ID: 3.00
> >>               Link Frequency: [b]
> >>               Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> >>               Link Frequency Capability: 200MHz+ 300MHz- 400MHz+
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
> >>               Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT-
> 64bA+ UIDRD- ExtRS- UCnfE-
> >>
> >> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
> Processor Address Map [1022:1201]
> >>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>
> >> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
> Processor DRAM Controller [1022:1202]
> >>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>
> >> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
> Processor Miscellaneous Control [1022:1203]
> >>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Capabilities: [f0] Secure device <?>
> >>       Kernel driver in use: k10temp
> >>
> >> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
> Processor Link Control [1022:1204]
> >>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>
> >> 03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc
> CMI8738/CMI8768 PCI Audio [13f6:0111] (rev 10)
> >>       Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio
> Device [13f6:0111]
> >>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64 (500ns min, 6000ns max)
> >>       Interrupt: pin A routed to IRQ 22
> >>       Region 0: I/O ports at 9800 [size=256]
> >>       Capabilities: [c0] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Kernel driver in use: pciback
> >>
> >> 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
> Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:4257]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 40
> >>       Region 0: Memory at f97fe000 (64-bit, non-prefetchable) [size=8K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
> >>               Address: 0000000000000000  Data: 0000
> >>       Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
> >>               Vector table: BAR=0 offset=00001000
> >>               PBA: BAR=0 offset=00001080
> >>       Capabilities: [a0] Express (v2) Endpoint, MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> >>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
> >>               LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <4us, L1 unlimited
> >>                       ClockPM+ Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM+ AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Not Supported,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [100 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 14, GenCap- CGenEn-
> ChkCap- ChkEn-
> >>       Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
> >>       Capabilities: [150 v1] Latency Tolerance Reporting
> >>               Max snoop latency: 0ns
> >>               Max no snoop latency: 0ns
> >>       Kernel driver in use: pciback
> >>
> >> 05:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200A PCI
> Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
> >>       I/O behind bridge: 0000f000-00000fff
> >>       Memory behind bridge: f9800000-f98fffff
> >>       Prefetchable memory behind bridge:
> 00000000fff00000-00000000000fffff
> >>       Secondary status: 66MHz- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> >>       BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> >>               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >>       Capabilities: [50] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>               Bridge: PM- B3+
> >>       Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
> >>               Address: 0000000000000000  Data: 0000
> >>       Capabilities: [80] Subsystem: Device [0000:0000]
> >>       Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
> >>               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s
> <4us, L1 <64us
> >>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> BrConfRtry-
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr+ TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <16us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>       Capabilities: [100 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> >>               AERCap: First Error Pointer: 14, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> >>
> >> 06:01.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
> (prog-if 10 [OHCI])
> >>       Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 37
> >>       Region 0: Memory at f98fd000 (32-bit, non-prefetchable) [size=4K]
> >>       Capabilities: [40] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Kernel driver in use: pciback
> >>
> >> 06:01.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
> (prog-if 10 [OHCI])
> >>       Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
> >>       Interrupt: pin B routed to IRQ 38
> >>       Region 0: Memory at f98fe000 (32-bit, non-prefetchable) [size=4K]
> >>       Capabilities: [40] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Kernel driver in use: pciback
> >>
> >> 06:01.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
> (prog-if 20 [EHCI])
> >>       Subsystem: Device [1838:1074]
> >>       Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Interrupt: pin C routed to IRQ 39
> >>       Region 0: Memory at f98ffc00 (32-bit, non-prefetchable) [size=256]
> >>       Capabilities: [40] Power Management version 2
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Kernel driver in use: pciback
> >>
> >> 07:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
> nee ATI Turks [Radeon HD 6570] [1002:6759] (prog-if 00 [VGA controller])
> >>       Subsystem: PC Partner Limited Device [174b:e193]
> >>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Interrupt: pin A routed to IRQ 32
> >>       Region 0: Memory at a0000000 (64-bit, prefetchable) [disabled]
> [size=256M]
> >>       Region 2: Memory at f99c0000 (64-bit, non-prefetchable) [disabled]
> [size=128K]
> >>       Region 4: I/O ports at a000 [disabled] [size=256]
> >>       Expansion ROM at f99a0000 [disabled] [size=128K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
> >>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> >>               Address: 0000000000000000  Data: 0000
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [150 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 14, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> >>       Kernel driver in use: pciback
> >>
> >> 07:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
> Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
> >>       Subsystem: PC Partner Limited Device [174b:aa90]
> >>       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Interrupt: pin B routed to IRQ 33
> >>       Region 0: Memory at f99fc000 (64-bit, non-prefetchable) [disabled]
> [size=16K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
> >>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee1000c  Data: 4000
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [150 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 14, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> >>       Kernel driver in use: pciback
> >>
> >> 08:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. Device
> [14f1:8210]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 47
> >>       Region 0: Memory at f9a00000 (64-bit, non-prefetchable) [size=2M]
> >>       Capabilities: [40] Express (v1) Endpoint, MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
> >>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <2us, L1 <4us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> >>       Capabilities: [80] Power Management version 3
> >>               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [90] Vital Product Data
> >>               Unknown small resource type 00, will not decode more.
> >>       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> >>               Address: 0000000000000000  Data: 0000
> >>       Capabilities: [100 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 00, GenCap- CGenEn-
> ChkCap- ChkEn-
> >>       Capabilities: [200 v1] Virtual Channel
> >>               Caps:   LPEVC=1 RefClk=100ns PATEntryBits=1
> >>               Arb:    Fixed+ WRR32+ WRR64+ WRR128-
> >>               Ctrl:   ArbSelect=WRR64
> >>               Status: InProgress-
> >>               Port Arbitration Table [240] <?>
> >>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1
> RejSnoopTrans-
> >>                       Arb:    Fixed- WRR32- WRR64- WRR128-
> TWRR128- WRR256-
> >>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >>                       Status: NegoPending- InProgress-
> >>               VC1:    Caps:   PATOffset=00 MaxTimeSlots=1
> RejSnoopTrans-
> >>                       Arb:    Fixed- WRR32- WRR64- WRR128-
> TWRR128- WRR256-
> >>                       Ctrl:   Enable- ID=1 ArbSelect=Fixed TC/VC=00
> >>                       Status: NegoPending- InProgress-
> >>       Kernel driver in use: pciback
> >>
> >> 09:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
> Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 48
> >>       Region 0: Memory at f9cfe000 (64-bit, non-prefetchable) [size=8K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
> >>               Address: 0000000000000000  Data: 0000
> >>       Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
> >>               Vector table: BAR=0 offset=00001000
> >>               PBA: BAR=0 offset=00001080
> >>       Capabilities: [a0] Express (v2) Endpoint, MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> >>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
> AuxPwr+ TransPend-
> >>               LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <4us, L1 unlimited
> >>                       ClockPM+ Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM+ AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Not Supported,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [100 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 00, GenCap- CGenEn-
> ChkCap- ChkEn-
> >>       Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
> >>       Capabilities: [150 v1] Latency Tolerance Reporting
> >>               Max snoop latency: 0ns
> >>               Max no snoop latency: 0ns
> >>       Kernel driver in use: xhci_hcd
> >>
> >> 0a:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 130
> >>       Region 0: I/O ports at b800 [size=256]
> >>       Region 2: Memory at bfeff000 (64-bit, prefetchable) [size=4K]
> >>       Region 4: Memory at bfef8000 (64-bit, prefetchable) [size=16K]
> >>       Expansion ROM at f9de0000 [disabled] [size=128K]
> >>       Capabilities: [40] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee0100c  Data: 4000
> >>       Capabilities: [70] Express (v2) Endpoint, MSI 01
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 <64us
> >>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
> AuxPwr+ TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <512ns, L1 <64us
> >>                       ClockPM+ Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Not Supported,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
> >>               Vector table: BAR=4 offset=00000000
> >>               PBA: BAR=4 offset=00000800
> >>       Capabilities: [cc] Vital Product Data
> >>               Unknown small resource type 00, will not decode more.
> >>       Capabilities: [100 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 00, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> >>       Capabilities: [140 v1] Virtual Channel
> >>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
> >>               Arb:    Fixed- WRR32- WRR64- WRR128-
> >>               Ctrl:   ArbSelect=Fixed
> >>               Status: InProgress-
> >>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1
> RejSnoopTrans-
> >>                       Arb:    Fixed- WRR32- WRR64- WRR128-
> TWRR128- WRR256-
> >>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >>                       Status: NegoPending- InProgress-
> >>       Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00
> >>       Kernel driver in use: r8169
> >>
> >> 0b:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
> >>       Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 129
> >>       Region 0: I/O ports at c800 [size=256]
> >>       Region 2: Memory at bffff000 (64-bit, prefetchable) [size=4K]
> >>       Region 4: Memory at bfff8000 (64-bit, prefetchable) [size=16K]
> >>       Expansion ROM at f9ee0000 [disabled] [size=128K]
> >>       Capabilities: [40] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee0100c  Data: 4000
> >>       Capabilities: [70] Express (v2) Endpoint, MSI 01
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 <64us
> >>                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> >>                       MaxPayload 128 bytes, MaxReadReq 4096
> bytes
> >>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
> AuxPwr+ TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <512ns, L1 <64us
> >>                       ClockPM+ Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Not Supported,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
> >>               Vector table: BAR=4 offset=00000000
> >>               PBA: BAR=4 offset=00000800
> >>       Capabilities: [cc] Vital Product Data
> >>               Unknown small resource type 00, will not decode more.
> >>       Capabilities: [100 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout+
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 00, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> >>       Capabilities: [140 v1] Virtual Channel
> >>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
> >>               Arb:    Fixed- WRR32- WRR64- WRR128-
> >>               Ctrl:   ArbSelect=Fixed
> >>               Status: InProgress-
> >>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1
> RejSnoopTrans-
> >>                       Arb:    Fixed- WRR32- WRR64- WRR128-
> TWRR128- WRR256-
> >>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >>                       Status: NegoPending- InProgress-
> >>       Capabilities: [160 v1] Device Serial Number 04-00-00-00-68-4c-e0-00
> >>       Kernel driver in use: r8169
> >>
> >> 0c:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
> nee ATI Turks [Radeon HD 6570] [1002:6759] (prog-if 00 [VGA controller])
> >>       Subsystem: PC Partner Limited Device [174b:e193]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 127
> >>       Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
> >>       Region 2: Memory at f9fc0000 (64-bit, non-prefetchable)
> [size=128K]
> >>       Region 4: I/O ports at d000 [size=256]
> >>       Expansion ROM at f9fa0000 [disabled] [size=128K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
> >>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> >>               LnkCap: Port #1, Speed 5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Not Supported,
> TimeoutDis-
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee0100c  Data: 4000
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [150 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 00, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> >>       Kernel driver in use: radeon
> >>
> >> 0c:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
> Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
> >>       Subsystem: PC Partner Limited Device [174b:aa90]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin B routed to IRQ 138
> >>       Region 0: Memory at f9ffc000 (64-bit, non-prefetchable) [size=16K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
> >>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> >>               LnkCap: Port #1, Speed 5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Not Supported,
> TimeoutDis-
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee0100c  Data: 4000
> >>       Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> >>       Capabilities: [150 v1] Advanced Error Reporting
> >>               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >>               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >>               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >>               AERCap: First Error Pointer: 00, GenCap+ CGenEn-
> ChkCap+ ChkEn-
> >>       Kernel driver in use: snd_hda_intel
> >>
> >> 0d:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98
> [GeForce 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA controller])
> >>       Subsystem: ASUSTeK Computer Inc. Device [1043:8266]
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0, Cache Line Size: 64 bytes
> >>       Interrupt: pin A routed to IRQ 10
> >>       Region 0: Memory at fd000000 (32-bit, non-prefetchable)
> [size=16M]
> >>       Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> >>       Region 3: Memory at fa000000 (64-bit, non-prefetchable)
> [size=32M]
> >>       Region 5: I/O ports at e800 [size=128]
> >>       Expansion ROM at fe9e0000 [disabled] [size=128K]
> >>       Capabilities: [60] Power Management version 3
> >>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> >>               Address: 0000000000000000  Data: 0000
> >>       Capabilities: [78] Express (v1) Endpoint, MSI 00
> >>               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 <4us
> >>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <512ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain-
> CommClk+
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>       Capabilities: [100 v1] Virtual Channel
> >>               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
> >>               Arb:    Fixed- WRR32- WRR64- WRR128-
> >>               Ctrl:   ArbSelect=Fixed
> >>               Status: InProgress-
> >>               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1
> RejSnoopTrans-
> >>                       Arb:    Fixed- WRR32- WRR64- WRR128-
> TWRR128- WRR256-
> >>                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >>                       Status: NegoPending- InProgress-
> >>       Capabilities: [128 v1] Power Budgeting <?>
> >>       Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=024 <?>
> >>
> 
> >> 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC
> [Natoma] [8086:1237] (rev 02)
> >>       Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> >>       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>
> >> 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA
> [Natoma/Triton II] [8086:7000]
> >>       Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> >>       Physical Slot: 1
> >>       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>
> >> 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE
> [Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
> >>       Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> >>       Physical Slot: 1
> >>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>       Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
> [size=8]
> >>       Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
> [size=1]
> >>       Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
> [size=8]
> >>       Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
> [size=1]
> >>       Region 4: I/O ports at c260 [size=16]
> >>
> >> 00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB
> [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
> >>       Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> >>       Physical Slot: 1
> >>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>       Interrupt: pin D routed to IRQ 23
> >>       Region 4: I/O ports at c240 [size=32]
> >>       Kernel driver in use: uhci_hcd
> >>
> >> 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
> [8086:7113] (rev 03)
> >>       Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
> >>       Physical Slot: 1
> >>       Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>       Interrupt: pin A routed to IRQ 9
> >>
> >> 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8]
> (prog-if 00 [VGA controller])
> >>       Subsystem: Red Hat, Inc Device [1af4:1100]
> >>       Physical Slot: 2
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>       Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M]
> >>       Region 1: Memory at f3094000 (32-bit, non-prefetchable) [size=4K]
> >>       Expansion ROM at f3080000 [disabled] [size=64K]
> >>       Kernel driver in use: cirrus
> >>
> >> 00:03.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device
> [5853:0001] (rev 01)
> >>       Subsystem: XenSource, Inc. Xen Platform Device [5853:0001]
> >>       Physical Slot: 3
> >>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>       Interrupt: pin A routed to IRQ 28
> >>       Region 0: I/O ports at c000 [size=256]
> >>       Region 1: Memory at f2000000 (32-bit, prefetchable) [size=16M]
> >>       Kernel driver in use: xen-platform-pci
> >>
> >> 00:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
> nee ATI Turks [Radeon HD 6570] [1002:6759] (prog-if 00 [VGA controller])
> >>       Subsystem: PC Partner Limited Device [174b:e193]
> >>       Physical Slot: 5
> >>       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Interrupt: pin A routed to IRQ 36
> >>       Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
> >>       Region 2: Memory at f3040000 (64-bit, non-prefetchable)
> [size=128K]
> >>       Region 4: I/O ports at c100 [size=256]
> >>       Expansion ROM at f3060000 [disabled] [size=128K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
> >>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> >>               Address: 0000000000000000  Data: 0000
> >>       Capabilities: [100 v9] #1002
> >>
> >> 00:06.0 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
> Turks/Whistler HDMI Audio [Radeon HD 6000 Series] [1002:aa90]
> >>       Subsystem: PC Partner Limited Device [174b:aa90]
> >>       Physical Slot: 6
> >>       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
> >>       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >>       Latency: 0
> >>       Interrupt: pin B routed to IRQ 80
> >>       Region 0: Memory at f3090000 (64-bit, non-prefetchable) [size=16K]
> >>       Capabilities: [50] Power Management version 3
> >>               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >>               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0
> PME-
> >>       Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
> >>               DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
> >>                       ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
> FLReset-
> >>               DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >>                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >>                       MaxPayload 128 bytes, MaxReadReq 512 bytes
> >>               DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+
> AuxPwr- TransPend-
> >>               LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
> Latency L0 <64ns, L1 <1us
> >>                       ClockPM- Surprise- LLActRep- BwNot-
> >>               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> >>                       ExtSynch- ClockPM- AutWidDis- BWInt-
> AutBWInt-
> >>               LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >>               DevCap2: Completion Timeout: Range ABCD,
> TimeoutDis+
> >>               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> >>               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> >>                        Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >>                        Compliance De-emphasis: -6dB
> >>               LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >>                        EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >>       Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>               Address: 00000000fee57000  Data: 4300
> >>       Capabilities: [100 v0] #1002
> >>       Kernel driver in use: snd_hda_intel
> >>
> 
> >> libxl: debug: libxl_create.c:1233:do_domain_create: ao 0x1643f40: create:
> how=(nil) callback=(nil) poller=0x1643fa0
> >> libxl: debug: libxl_device.c:257:libxl__device_disk_set_backend: Disk
> vdev=hda spec.backend=unknown
> >> libxl: debug: libxl_device.c:296:libxl__device_disk_set_backend: Disk
> vdev=hda, using backend phy
> >> libxl: debug: libxl_create.c:678:initiate_domain_create: running bootloader
> >> libxl: debug: libxl_bootloader.c:321:libxl__bootloader_run: not a PV 
> >> domain,
> skipping bootloader
> >> libxl: debug: libxl_event.c:608:libxl__ev_xswatch_deregister: watch
> w=0x1644308: deregister unregistered
> >> xc: detail: elf_parse_binary: phdr: paddr=0x100000 memsz=0x9efa8
> >> xc: detail: elf_parse_binary: memory: 0x100000 -> 0x19efa8
> >> xc: detail: VIRTUAL MEMORY ARRANGEMENT:
> >>   Loader:        0000000000100000->000000000019efa8
> >>   Modules:       0000000000000000->0000000000000000
> >>   TOTAL:         0000000000000000->000000003f800000
> >>   ENTRY ADDRESS: 0000000000100000
> >> xc: detail: PHYSICAL MEMORY ALLOCATION:
> >>   4KB PAGES: 0x0000000000000200
> >>   2MB PAGES: 0x00000000000001fb
> >>   1GB PAGES: 0x0000000000000000
> >> xc: detail: elf_load_binary: phdr 0 at 0x7f6937d66000 -> 0x7f6937dfbe2d
> >> libxl: debug: libxl_device.c:257:libxl__device_disk_set_backend: Disk
> vdev=hda spec.backend=phy
> >> libxl: debug: libxl_event.c:559:libxl__ev_xswatch_register: watch
> w=0x1645758 wpath=/local/domain/0/backend/vbd/19/768/state token=3/0:
> register slotnum=3
> >> libxl: debug: libxl_create.c:1246:do_domain_create: ao 0x1643f40:
> inprogress: poller=0x1643fa0, flags=i
> >> libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x1645758
> wpath=/local/domain/0/backend/vbd/19/768/state token=3/0: event
> epath=/local/domain/0/backend/vbd/19/768/state
> >> libxl: debug: libxl_event.c:647:devstate_watch_callback: backend
> /local/domain/0/backend/vbd/19/768/state wanted state 2 still waiting state 1
> >> libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x1645758
> wpath=/local/domain/0/backend/vbd/19/768/state token=3/0: event
> epath=/local/domain/0/backend/vbd/19/768/state
> >> libxl: debug: libxl_event.c:643:devstate_watch_callback: backend
> /local/domain/0/backend/vbd/19/768/state wanted state 2 ok
> >> libxl: debug: libxl_event.c:596:libxl__ev_xswatch_deregister: watch
> w=0x1645758 wpath=/local/domain/0/backend/vbd/19/768/state token=3/0:
> deregister slotnum=3
> >> libxl: debug: libxl_event.c:608:libxl__ev_xswatch_deregister: watch
> w=0x1645758: deregister unregistered
> >> libxl: debug: libxl_device.c:959:device_hotplug: calling hotplug script:
> /etc/xen/scripts/block add
> >> libxl: debug: libxl_dm.c:1234:libxl__spawn_local_dm: Spawning
> device-model /usr/local/lib/xen/bin/qemu-system-i386 with arguments:
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> /usr/local/lib/xen/bin/qemu-system-i386
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -xen-domid
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   19
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -chardev
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> socket,id=libxl-cmd,path=/var/run/xen/qmp-libxl-19,server,nowait
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -mon
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> chardev=libxl-cmd,mode=control
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -name
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   xbmc
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -vnc
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> 172.16.1.1:9,password,to=99
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -global
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   isa-fdc.driveA=
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -serial
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   pty
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -vga
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   cirrus
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -global
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> vga.vram_size_mb=8
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -boot
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   order=c
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -usb
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -usbdevice
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   tablet
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -smp
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   2,maxcpus=2
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -device
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> e1000,id=nic0,netdev=net0,mac=00:16:3a:c6:76:65
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -netdev
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> type=tap,id=net0,ifname=vif19.0-emu,script=no,downscript=no
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -M
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   xenfv
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -m
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   1016
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:   -drive
> >> libxl: debug: libxl_dm.c:1236:libxl__spawn_local_dm:
> file=/dev/xen_vms/xbmc,if=ide,index=0,media=disk,format=raw,cache=writeba
> ck
> >> libxl: debug: libxl_event.c:559:libxl__ev_xswatch_register: watch
> w=0x1644540 wpath=/local/domain/0/device-model/19/state token=3/1:
> register slotnum=3
> >> libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x1644540
> wpath=/local/domain/0/device-model/19/state token=3/1: event
> epath=/local/domain/0/device-model/19/state
> >> libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x1644540
> wpath=/local/domain/0/device-model/19/state token=3/1: event
> epath=/local/domain/0/device-model/19/state
> >> libxl: debug: libxl_event.c:596:libxl__ev_xswatch_deregister: watch
> w=0x1644540 wpath=/local/domain/0/device-model/19/state token=3/1:
> deregister slotnum=3
> >> libxl: debug: libxl_event.c:608:libxl__ev_xswatch_deregister: watch
> w=0x1644540: deregister unregistered
> >> libxl: debug: libxl_qmp.c:707:libxl__qmp_initialize: connected to
> /var/run/xen/qmp-libxl-19
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: qmp
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "qmp_capabilities",
> >>     "id": 1
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "query-chardev",
> >>     "id": 2
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "change",
> >>     "id": 3,
> >>     "arguments": {
> >>         "device": "vnc",
> >>         "target": "password",
> >>         "arg": "test"
> >>     }
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "query-vnc",
> >>     "id": 4
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_event.c:559:libxl__ev_xswatch_register: watch
> w=0x16439b8 wpath=/local/domain/0/backend/vif/19/0/state token=3/2:
> register slotnum=3
> >> libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x16439b8
> wpath=/local/domain/0/backend/vif/19/0/state token=3/2: event
> epath=/local/domain/0/backend/vif/19/0/state
> >> libxl: debug: libxl_event.c:647:devstate_watch_callback: backend
> /local/domain/0/backend/vif/19/0/state wanted state 2 still waiting state 1
> >> libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x16439b8
> wpath=/local/domain/0/backend/vif/19/0/state token=3/2: event
> epath=/local/domain/0/backend/vif/19/0/state
> >> libxl: debug: libxl_event.c:643:devstate_watch_callback: backend
> /local/domain/0/backend/vif/19/0/state wanted state 2 ok
> >> libxl: debug: libxl_event.c:596:libxl__ev_xswatch_deregister: watch
> w=0x16439b8 wpath=/local/domain/0/backend/vif/19/0/state token=3/2:
> deregister slotnum=3
> >> libxl: debug: libxl_event.c:608:libxl__ev_xswatch_deregister: watch
> w=0x16439b8: deregister unregistered
> >> libxl: debug: libxl_device.c:959:device_hotplug: calling hotplug script:
> /etc/xen/scripts/vif-bridge online
> >> libxl: debug: libxl_device.c:959:device_hotplug: calling hotplug script:
> /etc/xen/scripts/vif-bridge add
> >> libxl: debug: libxl_qmp.c:707:libxl__qmp_initialize: connected to
> /var/run/xen/qmp-libxl-19
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: qmp
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "qmp_capabilities",
> >>     "id": 1
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "device_add",
> >>     "id": 2,
> >>     "arguments": {
> >>         "driver": "xen-pci-passthrough",
> >>         "id": "pci-pt-07_00.0",
> >>         "hostaddr": "0000:07:00.0"
> >>     }
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "query-pci",
> >>     "id": 3
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:707:libxl__qmp_initialize: connected to
> /var/run/xen/qmp-libxl-19
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: qmp
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "qmp_capabilities",
> >>     "id": 1
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "device_add",
> >>     "id": 2,
> >>     "arguments": {
> >>         "driver": "xen-pci-passthrough",
> >>         "id": "pci-pt-07_00.1",
> >>         "hostaddr": "0000:07:00.1"
> >>     }
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{
> >>     "execute": "query-pci",
> >>     "id": 3
> >> }
> >> '
> >> libxl: debug: libxl_qmp.c:299:qmp_handle_response: message type: return
> >> libxl: debug: libxl_pci.c:81:libxl__create_pci_backend: Creating pci 
> >> backend
> >> libxl: debug: libxl_event.c:1737:libxl__ao_progress_report: ao 0x1643f40:
> progress report: ignored
> >> libxl: debug: libxl_event.c:1569:libxl__ao_complete: ao 0x1643f40: 
> >> complete,
> rc=0
> >> libxl: debug: libxl_event.c:1541:libxl__ao__destroy: ao 0x1643f40: destroy
> >> xc: debug: hypercall buffer: total allocations:518 total releases:518
> >> xc: debug: hypercall buffer: current allocations:0 maximum allocations:2
> >> xc: debug: hypercall buffer: cache current size:2
> >> xc: debug: hypercall buffer: cache hits:514 misses:2 toobig:2
> >> Parsing config from /etc/xen/domU/production/xbmc.cfg
> >> Daemon running with PID 2901
> 
> >> (XEN) [2013-09-17 09:14:57] io.c:280: d19: bind: m_gsi=32 g_gsi=36
> device=5 intx=0
> >> (XEN) [2013-09-17 09:14:57] AMD-Vi: Disable: device id = 0x700, domain = 0,
> paging mode = 3
> >> (XEN) [2013-09-17 09:14:57] AMD-Vi: Setup I/O page table: device id = 
> >> 0x700,
> root table = 0x47e8a2000, domain = 19, paging mode = 4
> >> (XEN) [2013-09-17 09:14:57] AMD-Vi: Re-assign 0000:07:00.0 from dom0 to
> dom19
> >> (XEN) [2013-09-17 09:14:57] io.c:280: d19: bind: m_gsi=33 g_gsi=41
> device=6 intx=1
> >> (XEN) [2013-09-17 09:14:57] AMD-Vi: Disable: device id = 0x701, domain = 0,
> paging mode = 3
> >> (XEN) [2013-09-17 09:14:57] AMD-Vi: Setup I/O page table: device id = 
> >> 0x701,
> root table = 0x47e8a2000, domain = 19, paging mode = 4
> >> (XEN) [2013-09-17 09:14:57] AMD-Vi: Re-assign 0000:07:00.1 from dom0 to
> dom19
> >> (d19) [2013-09-17 09:14:57] HVM Loader
> >> (d19) [2013-09-17 09:14:57] Detected Xen v4.4-unstable
> >> (d19) [2013-09-17 09:14:57] Xenbus rings @0xfeffc000, event channel 4
> >> (d19) [2013-09-17 09:14:57] System requested SeaBIOS
> >> (d19) [2013-09-17 09:14:57] CPU speed is 3200 MHz
> >> (d19) [2013-09-17 09:14:57] Relocating guest memory for lowmem MMIO
> space disabled
> >> (XEN) [2013-09-17 09:14:57] irq.c:270: Dom19 PCI link 0 changed 0 -> 5
> >> (d19) [2013-09-17 09:14:57] PCI-ISA link 0 routed to IRQ5
> >> (XEN) [2013-09-17 09:14:57] irq.c:270: Dom19 PCI link 1 changed 0 -> 10
> >> (d19) [2013-09-17 09:14:57] PCI-ISA link 1 routed to IRQ10
> >> (XEN) [2013-09-17 09:14:57] irq.c:270: Dom19 PCI link 2 changed 0 -> 11
> >> (d19) [2013-09-17 09:14:57] PCI-ISA link 2 routed to IRQ11
> >> (XEN) [2013-09-17 09:14:57] irq.c:270: Dom19 PCI link 3 changed 0 -> 5
> >> (d19) [2013-09-17 09:14:57] PCI-ISA link 3 routed to IRQ5
> >> (d19) [2013-09-17 09:14:57] pci dev 01:2 INTD->IRQ5
> >> (d19) [2013-09-17 09:14:57] pci dev 01:3 INTA->IRQ10
> >> (d19) [2013-09-17 09:14:57] pci dev 03:0 INTA->IRQ5
> >> (d19) [2013-09-17 09:14:57] pci dev 04:0 INTA->IRQ5
> >> (d19) [2013-09-17 09:14:57] pci dev 05:0 INTA->IRQ10
> >> (d19) [2013-09-17 09:14:57] pci dev 06:0 INTB->IRQ5
> >> (d19) [2013-09-17 09:14:57] No RAM in high memory; setting high_mem
> resource base to 100000000
> >> (d19) [2013-09-17 09:14:57] pci dev 05:0 bar 10 size 010000000: 0e000000c
> >> (XEN) [2013-09-17 09:14:57] memory_map:add: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (d19) [2013-09-17 09:14:57] pci dev 02:0 bar 10 size 002000000: 0f0000008
> >> (d19) [2013-09-17 09:14:57] pci dev 03:0 bar 14 size 001000000: 0f2000008
> >> (d19) [2013-09-17 09:14:57] pci dev 04:0 bar 10 size 000020000: 0f3000000
> >> (d19) [2013-09-17 09:14:57] pci dev 04:0 bar 30 size 000020000: 0f3020000
> >> (XEN) [2013-09-17 09:14:57] memory_map:add: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (d19) [2013-09-17 09:14:57] pci dev 05:0 bar 18 size 000020000: 0f3040004
> >> (d19) [2013-09-17 09:14:57] pci dev 05:0 bar 30 size 000020000: 0f3060000
> >> (d19) [2013-09-17 09:14:57] pci dev 02:0 bar 30 size 000010000: 0f3080000
> >> (d19) [2013-09-17 09:14:57] pci dev 06:0 bar 10 size 000004000: 0f3090004
> >> (XEN) [2013-09-17 09:14:57] memory_map:add: dom19 gfn=f3090 mfn=f99fc
> nr=4
> >> (d19) [2013-09-17 09:14:57] pci dev 02:0 bar 14 size 000001000: 0f3094000
> >> (d19) [2013-09-17 09:14:57] pci dev 03:0 bar 10 size 000000100: 00000c001
> >> (d19) [2013-09-17 09:14:57] pci dev 05:0 bar 20 size 000000100: 00000c101
> >> (XEN) [2013-09-17 09:14:57] ioport_map:add: dom19 gport=c100
> mport=a000 nr=100
> >> (d19) [2013-09-17 09:14:57] pci dev 04:0 bar 14 size 000000040: 00000c201
> >> (d19) [2013-09-17 09:14:57] pci dev 01:2 bar 20 size 000000020: 00000c241
> >> (d19) [2013-09-17 09:14:57] pci dev 01:1 bar 20 size 000000010: 00000c261
> >> (d19) [2013-09-17 09:14:57] Multiprocessor initialisation:
> >> (d19) [2013-09-17 09:14:57]  - CPU0 ... 48-bit phys ... fixed MTRRs ... var
> MTRRs [3/8] ... done.
> >> (d19) [2013-09-17 09:14:57]  - CPU1 ... 48-bit phys ... fixed MTRRs ... var
> MTRRs [3/8] ... done.
> >> (d19) [2013-09-17 09:14:57] Testing HVM environment:
> >> (d19) [2013-09-17 09:14:57]  - REP INSB across page boundaries ... passed
> >> (d19) [2013-09-17 09:14:57]  - GS base MSRs and SWAPGS ... passed
> >> (d19) [2013-09-17 09:14:57] Passed 2 of 2 tests
> >> (d19) [2013-09-17 09:14:57] Writing SMBIOS tables ...
> >> (d19) [2013-09-17 09:14:57] Loading SeaBIOS ...
> >> (d19) [2013-09-17 09:14:57] Creating MP tables ...
> >> (d19) [2013-09-17 09:14:57] Loading ACPI ...
> >> (d19) [2013-09-17 09:14:57] vm86 TSS at fc00a080
> >> (d19) [2013-09-17 09:14:57] BIOS map:
> >> (d19) [2013-09-17 09:14:57]  10000-100d3: Scratch space
> >> (d19) [2013-09-17 09:14:57]  e0000-fffff: Main BIOS
> >> (d19) [2013-09-17 09:14:57] E820 table:
> >> (d19) [2013-09-17 09:14:57]  [00]: 00000000:00000000 -
> 00000000:000a0000: RAM
> >> (d19) [2013-09-17 09:14:57]  HOLE: 00000000:000a0000 -
> 00000000:000e0000
> >> (d19) [2013-09-17 09:14:57]  [01]: 00000000:000e0000 -
> 00000000:00100000: RESERVED
> >> (d19) [2013-09-17 09:14:57]  [02]: 00000000:00100000 -
> 00000000:3f800000: RAM
> >> (d19) [2013-09-17 09:14:57]  HOLE: 00000000:3f800000 -
> 00000000:fc000000
> >> (d19) [2013-09-17 09:14:57]  [03]: 00000000:fc000000 -
> 00000001:00000000: RESERVED
> >> (d19) [2013-09-17 09:14:57] Invoking SeaBIOS ...
> >> (d19) [2013-09-17 09:14:57] SeaBIOS (version
> rel-1.7.1-3-g3a28511-20130917_103837-serveerstertje)
> >> (d19) [2013-09-17 09:14:57]
> >> (d19) [2013-09-17 09:14:57] Found Xen hypervisor signature at 40000000
> >> (d19) [2013-09-17 09:14:57] xen: copy e820...
> >> (d19) [2013-09-17 09:14:57] Ram Size=0x3f800000 (0x0000000000000000
> high)
> >> (d19) [2013-09-17 09:14:57] Relocating low data from 0x000e42d0 to
> 0x000ef790 (size 2153)
> >> (d19) [2013-09-17 09:14:57] Relocating init from 0x000e4b39 to 0x3f7e2e80
> (size 53335)
> >> (d19) [2013-09-17 09:14:57] CPU Mhz=3200
> >> (d19) [2013-09-17 09:14:57] Found 10 PCI devices (max PCI bus is 00)
> >> (d19) [2013-09-17 09:14:57] Allocated Xen hypercall page at 3f7ff000
> >> (d19) [2013-09-17 09:14:57] Detected Xen v4.4-unstable
> >> (d19) [2013-09-17 09:14:57] xen: copy BIOS tables...
> >> (d19) [2013-09-17 09:14:57] Copying SMBIOS entry point from 0x00010010
> to 0x000fdbd0
> >> (d19) [2013-09-17 09:14:57] Copying MPTABLE from 0xfc001160/fc001170 to
> 0x000fdad0
> >> (d19) [2013-09-17 09:14:57] Copying PIR from 0x00010030 to 0x000fda50
> >> (d19) [2013-09-17 09:14:57] Copying ACPI RSDP from 0x000100b0 to
> 0x000fda20
> >> (d19) [2013-09-17 09:14:57] Scan for VGA option rom
> >> (d19) [2013-09-17 09:14:57] Running option rom at c000:0003
> >> (XEN) [2013-09-17 09:14:57] stdvga.c:147:d19 entering stdvga and caching
> modes
> >> (d19) [2013-09-17 09:14:57] Turning on vga text mode console
> >> (d19) [2013-09-17 09:14:57] SeaBIOS (version
> rel-1.7.1-3-g3a28511-20130917_103837-serveerstertje)
> >> (d19) [2013-09-17 09:14:57]
> >> (d19) [2013-09-17 09:14:57] UHCI init on dev 00:01.2 (io=c240)
> >> (d19) [2013-09-17 09:14:57] Found 1 lpt ports
> >> (d19) [2013-09-17 09:14:57] Found 1 serial ports
> >> (d19) [2013-09-17 09:14:57] ATA controller 1 at 1f0/3f4/c260 (irq 14 dev 9)
> >> (d19) [2013-09-17 09:14:57] ATA controller 2 at 170/374/c268 (irq 15 dev 9)
> >> (d19) [2013-09-17 09:14:57] ata0-0: QEMU HARDDISK ATA-7 Hard-Disk
> (20480 MiBytes)
> >> (d19) [2013-09-17 09:14:57] Searching bootorder for:
> /pci@i0cf8/*@1,1/drive@0/disk@0
> >> (d19) [2013-09-17 09:14:57] DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4
> DVD/CD]
> >> (d19) [2013-09-17 09:14:57] Searching bootorder for:
> /pci@i0cf8/*@1,1/drive@1/disk@0
> >> (d19) [2013-09-17 09:14:57] PS2 keyboard initialized
> >> (d19) [2013-09-17 09:14:57] All threads complete.
> >> (d19) [2013-09-17 09:14:57] Scan for option roms
> >> (d19) [2013-09-17 09:14:57] Running option rom at c900:0003
> >> (d19) [2013-09-17 09:14:57] pmm call arg1=1
> >> (d19) [2013-09-17 09:14:57] pmm call arg1=0
> >> (d19) [2013-09-17 09:14:57] pmm call arg1=1
> >> (d19) [2013-09-17 09:14:57] pmm call arg1=0
> >> (d19) [2013-09-17 09:14:57] Searching bootorder for: /pci@i0cf8/*@4
> >> (d19) [2013-09-17 09:14:57] Press F12 for boot menu.
> >> (d19) [2013-09-17 09:14:57]
> >> (d19) [2013-09-17 09:15:00] drive 0x000fd9d0: PCHS=16383/16/63
> translation=lba LCHS=1024/255/63 s=41943040
> >> (d19) [2013-09-17 09:15:00] Space available for UMB: 000ca000-000ee800
> >> (d19) [2013-09-17 09:15:00] Returned 61440 bytes of ZoneHigh
> >> (d19) [2013-09-17 09:15:00] e820 map has 6 items:
> >> (d19) [2013-09-17 09:15:00]   0: 0000000000000000 - 000000000009fc00 =
> 1 RAM
> >> (d19) [2013-09-17 09:15:00]   1: 000000000009fc00 - 00000000000a0000 =
> 2 RESERVED
> >> (d19) [2013-09-17 09:15:00]   2: 00000000000f0000 - 0000000000100000
> = 2 RESERVED
> >> (d19) [2013-09-17 09:15:00]   3: 0000000000100000 - 000000003f7ff000 =
> 1 RAM
> >> (d19) [2013-09-17 09:15:00]   4: 000000003f7ff000 - 000000003f800000 =
> 2 RESERVED
> >> (d19) [2013-09-17 09:15:00]   5: 00000000fc000000 - 0000000100000000 =
> 2 RESERVED
> >> (d19) [2013-09-17 09:15:00] enter handle_19:
> >> (d19) [2013-09-17 09:15:00]   NULL
> >> (d19) [2013-09-17 09:15:00] Booting from Hard Disk...
> >> (d19) [2013-09-17 09:15:00] Booting from 0000:7c00
> >> (XEN) [2013-09-17 09:15:03] stdvga.c:151:d19 leaving stdvga
> >> (XEN) [2013-09-17 09:15:09] stdvga.c:147:d19 entering stdvga and caching
> modes
> >> (XEN) [2013-09-17 09:15:11] irq.c:375: Dom19 callback via changed to Direct
> Vector 0xf3
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:remove: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:add: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:remove: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:add: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:remove: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:add: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:remove: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:13] memory_map:add: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:13] ioport_map:add: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:13] memory_map:remove: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:14] memory_map:remove: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:14] ioport_map:remove: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=e0000
> mfn=a0000 nr=10000
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=f3040
> mfn=f99c0 nr=20
> >> (XEN) [2013-09-17 09:15:14] ioport_map:add: dom19 gport=c100
> mport=a000 nr=100
> >> (XEN) [2013-09-17 09:15:14] memory_map:remove: dom19 gfn=f3090
> mfn=f99fc nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=f3090 mfn=f99fc
> nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:remove: dom19 gfn=f3090
> mfn=f99fc nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=f3090 mfn=f99fc
> nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:remove: dom19 gfn=f3090
> mfn=f99fc nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=f3090 mfn=f99fc
> nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:remove: dom19 gfn=f3090
> mfn=f99fc nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=f3090 mfn=f99fc
> nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:remove: dom19 gfn=f3090
> mfn=f99fc nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=f3090 mfn=f99fc
> nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:remove: dom19 gfn=f3090
> mfn=f99fc nr=4
> >> (XEN) [2013-09-17 09:15:14] memory_map:add: dom19 gfn=f3090 mfn=f99fc
> nr=4
> >> (XEN) [2013-09-17 09:15:14] irq.c:270: Dom19 PCI link 0 changed 5 -> 0
> >> (XEN) [2013-09-17 09:15:14] irq.c:270: Dom19 PCI link 1 changed 10 -> 0
> >> (XEN) [2013-09-17 09:15:14] irq.c:270: Dom19 PCI link 2 changed 11 -> 0
> >> (XEN) [2013-09-17 09:15:14] irq.c:270: Dom19 PCI link 3 changed 5 -> 0
> 
> 
> >> _______________________________________________
> >> Xen-devel mailing list
> >> Xen-devel@xxxxxxxxxxxxx
> >> http://lists.xen.org/xen-devel
> 
> 
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel

Thanks,
Feng

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.