[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Problems in running XenARM on Cortex-A15 Fast Models
2013/9/20 Ian Campbell <ian.campbell@xxxxxxxxxx>
Hi Ian. How can see the pl011 UART? In the window after I type "sgcanvas FVP_VE_Cortex-A15x1.sgproj"? I built the model like this: xiaoguang@dophine:~/ARM/FastModelsPortfolio_8.2/examples/FVP_VE/Build_Cortex-A15x1$ sgcanvas FVP_VE_Cortex-A15x1.sgproj
And then build. The building log shows: -------------------------------------------------------------------- Model Build process completed successfully. --------------------------------------------------------------------
I can run a linux in this Fast Model following the instructions in this guide: www.virtualopensystems.com/media/kvm-resources/kvm-arm-guide.pdf
The command to run linux like: $ model_shell ~/ARM/FastModelsPortfolio_8.2/examples/FVP_VE/Build_Cortex-A15x1/Linux64-Release-GCC-4.4/cadi_system_Linux64-Release-GCC-4.4.so -C motherboard.smsc_91c111.enabled=1 -C motherboard.hostbridge.userNetworking=1 -C cluster.cpu0.semihosting-cmd_line="--kernel linux/arch/arm/boot/zImage --dtb vexpress-v2p-ca15-tc1.dtb -- earlyprintk console=ttyAMA0 mem=2048M root=/dev/nfs nfsroot=192.158.1.15:/home/xiaoguang/nfsroot/ rw ip=dhcp" boot-wrapper/linux-system-semi.axf
So I'm wondering if I have to build a boot loader? Or if I have sth. wrong to build a correct xen image? Next step would be to run the model in modeldebugger instead of I think I have to read the modeldebugger manual first. Ian. Thanks! Sincerely, Xiaoguang _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |