[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [RFC PATCH] vga: Start supporting resolution not multiple of 16 correctly.
On Fri, Mar 15, 2013 at 06:14:30PM +0000, Frediano Ziglio wrote: > Modern notebook support 136x768 resolution. The resolution width is > not multiple of 16 causing some problems. > > Qemu VGA emulation require width resolution to be multiple of 8. > > VNC implementation require width resolution to be multiple of 16. > > This patch remove these limits. Was tested with a Windows machine with > standard vga and 1366x768 as resolution. I had to update vgabios as > version in qemu (pc-bios/vgabios-stdvga.bin) is quite old. I also had > to add some patches on top of VGABIOS 0.7a to add some new > resolutions. > > I have some doubt about this patch > - are other UI (sdl, cocoa, qxl) happy if resolution is not multiple of 16 ? > - scanline is computed exactly without any alignment (so 1366 8 bit is > 1366 bytes) while getting vesa information from a laptop it seems to > use some kind of alignment (if became 0x580 which is 1408 bytes). > Perhaps should I change either VGABIOS and Qemu to make this > alignment? > Any plans to re-send the patch with Stefano's comments addressed? Thanks, -- Pasi > Signed-off-by: Frediano Ziglio <frediano.ziglio@xxxxxxxxxx> > > --- > hw/vga.c | 2 +- > ui/vnc.c | 27 +++++++++++++-------------- > 2 files changed, 14 insertions(+), 15 deletions(-) > > diff --git a/hw/vga.c b/hw/vga.c > index 1caf23d..d229f06 100644 > --- a/hw/vga.c > +++ b/hw/vga.c > @@ -651,7 +651,7 @@ void vbe_ioport_write_data(void *opaque, uint32_t > addr, uint32_t val) > } > break; > case VBE_DISPI_INDEX_XRES: > - if ((val <= VBE_DISPI_MAX_XRES) && ((val & 7) == 0)) { > + if ((val <= VBE_DISPI_MAX_XRES) && ((val & 1) == 0)) { > s->vbe_regs[s->vbe_index] = val; > } > break; > diff --git a/ui/vnc.c b/ui/vnc.c > index ff4e2ae..328d14d 100644 > --- a/ui/vnc.c > +++ b/ui/vnc.c > @@ -907,26 +907,27 @@ static int vnc_update_client(VncState *vs, int > has_dirty) > for (y = 0; y < height; y++) { > int x; > int last_x = -1; > - for (x = 0; x < width / 16; x++) { > - if (test_and_clear_bit(x, vs->dirty[y])) { > + for (x = 0; x < width; x += 16) { > + if (test_and_clear_bit(x/16, vs->dirty[y])) { > if (last_x == -1) { > last_x = x; > } > } else { > if (last_x != -1) { > - int h = find_and_clear_dirty_height(vs, y, last_x, x, > + int h = find_and_clear_dirty_height(vs, y, > last_x/16, x/16, > height); > > - n += vnc_job_add_rect(job, last_x * 16, y, > - (x - last_x) * 16, h); > + n += vnc_job_add_rect(job, last_x, y, > + (x - last_x), h); > } > last_x = -1; > } > } > if (last_x != -1) { > - int h = find_and_clear_dirty_height(vs, y, last_x, x, > height); > - n += vnc_job_add_rect(job, last_x * 16, y, > - (x - last_x) * 16, h); > + int h = find_and_clear_dirty_height(vs, y, last_x/16, > x/16, height); > + if (x > width) x = width; > + n += vnc_job_add_rect(job, last_x, y, > + (x - last_x), h); > } > } > > @@ -1771,7 +1772,7 @@ static void framebuffer_update_request(VncState > *vs, int incremental, > int w, int h) > { > int i; > - const size_t width = ds_get_width(vs->ds) / 16; > + const size_t width = (ds_get_width(vs->ds)+15) / 16; > > if (y_position > ds_get_height(vs->ds)) > y_position = ds_get_height(vs->ds); > @@ -2595,10 +2596,6 @@ static int vnc_refresh_server_surface(VncDisplay *vd) > * Check and copy modified bits from guest to server surface. > * Update server dirty map. > */ > - cmp_bytes = 64; > - if (cmp_bytes > vnc_server_fb_stride(vd)) { > - cmp_bytes = vnc_server_fb_stride(vd); > - } > if (vd->guest.format != VNC_SERVER_FB_FORMAT) { > int width = pixman_image_get_width(vd->server); > tmpbuf = qemu_pixman_linebuf_create(VNC_SERVER_FB_FORMAT, width); > @@ -2619,8 +2616,10 @@ static int vnc_refresh_server_surface(VncDisplay *vd) > } > server_ptr = server_row; > > - for (x = 0; x + 15 < width; > + cmp_bytes = 64; > + for (x = 0; x < width; > x += 16, guest_ptr += cmp_bytes, server_ptr += > cmp_bytes) { > + if (width - x < 16) cmp_bytes = 4 * (width - x); > if (!test_and_clear_bit((x / 16), vd->guest.dirty[y])) > continue; > if (memcmp(server_ptr, guest_ptr, cmp_bytes) == 0) > -- > 1.7.10.4 > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxx > http://lists.xen.org/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |