|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Xen disk write slowness in kernel 3.8.x
On 03/04/13 23:29, Felipe Franciosi wrote: Do you know the size of your requests? You used "iostat -m". Perhaps "iostat -xm" could be more meaningful as it will tell you the average request size in sectors. Good call. I started just a sequential write with dd from /dev/zero on the DomU:
# dd if=/dev/zero of=/mnt/fileshare/output.zero bs=1M count=4096
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 91.269 s, 47.1 MB/s
iostat -xm shows:
avg-cpu: %user %nice %system %iowait %steal %idle
0.11 0.00 2.71 0.23 0.56 96.38
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s
avgrq-sz avgqu-sz await svctm %util
sdc 1208.40 5337.80 150.00 645.20 5.35 23.39
74.00 6.47 8.15 0.91 72.72
sdf 1199.80 5350.80 148.00 643.40 5.30 23.34
74.12 6.88 8.68 0.96 76.06
sdd 1203.40 5304.60 148.80 638.60 5.28 23.21
74.11 5.42 6.88 0.78 61.38
sde 1213.80 5382.40 148.40 652.40 5.37 23.59
74.08 6.40 8.00 0.94 75.20
md3 0.00 0.00 1.60 1312.20 0.05 42.68
66.60 0.00 0.00 0.00 0.00
Shutting down the DomU, mounting /dev/md3 in and doing this directly from the Dom0 shows:
# dd if=/dev/zero of=/mnt/fileshare/output.zero bs=1M count=4096
4096+0 records in
4096+0 records out
4294967296 bytes (4.3 GB) copied, 44.2801 s, 97.0 MB/s
details from iostat -xm:
avg-cpu: %user %nice %system %iowait %steal %idle
0.00 0.00 2.16 0.00 0.57 97.27
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s
avgrq-sz avgqu-sz await svctm %util
sdc 1175.40 5220.60 143.40 633.60 5.13 22.85
73.76 6.01 7.73 0.87 67.60
sdf 1175.20 5154.00 147.40 624.40 5.14 22.55
73.46 6.87 8.88 0.97 74.90
sdd 1183.40 5133.80 145.40 625.20 5.19 22.50
73.60 5.19 6.73 0.77 59.60
sde 1176.40 5229.60 146.00 637.00 5.16 22.99
73.62 7.39 9.51 0.99 77.90
md3 0.00 0.00 0.60 1277.40 0.02 41.56
66.63 0.00 0.00 0.00 0.00
This about ties in with what bonnie++ gets as the write speed:Version 1.96 ------Sequential Output------ --Sequential Input- --Random- Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xenhost.lan.crc. 2G 635 91 97526 15 67864 16 952 97 295833 35 409.6 10 bonnie++ maxes out at about the same as dd in the DomU. I still didn't understand your environment. I think this is the first time you mention NFS/SMB. /dev/md3 is passed through as a phy device to a DomU. This DomU runs both samba and NFS shares. It doesn't seem to matter what method is the source of the writes to the drive (dd, bonnie++, sending a file via NFS or Samba), the max write speed seems to be bottlenecking at ~50Mb/sec - which I believe is purely the write speed to the array via the DomU. Weren't you testing copies from /dev/zero to your device? I have tested many ways - this being just one of them. I'd also recommend you run "oprofile" to see if there are any time sinks that we are overlooking. You can find out how to use it here: http://wiki.xen.org/wiki/Xen_Profiling:_oprofile_and_perf I ran 'perf top' on the Dom0, then started a write (dd if=/dev/zero of=/mnt/fileshare/output.zero bs=1M count=4096) on the DomU. This is what I'd see as the relevant output: Samples: 574K of event 'cpu-clock', Event count (approx.): 60028 88.37% [kernel] [k] xen_hypercall_sched_op 4.73% [kernel] [k] xen_hypercall_xen_version 1.00% [kernel] [k] xen_hypercall_grant_table_op 0.99% [raid456] [k] handle_stripe 0.77% [raid6_pq] [k] raid6_sse24_gen_syndrome 0.66% [raid456] [k] ops_run_io 0.57% [kernel] [k] memcpy 0.21% [kernel] [k] xen_restore_fl_direct 0.18% [raid456] [k] raid5_end_write_request 0.18% [raid456] [k] __raid_run_ops 0.14% [kernel] [k] xen_hypercall_event_channel_op 0.11% [kernel] [k] get_phys_to_machine 0.09% [raid456] [k] schedule_reconstruction Now repeated, with the same on the DomU:Samples: 300K of event 'cpu-clock', Event count (approx.): 84845 97.63% [kernel] [k] hypercall_page 0.44% [kernel] [k] copy_user_generic_string 0.41% [kernel] [k] __clear_user 0.08% [kernel] [k] __wake_up_bit 0.07% [kernel] [k] xen_restore_fl_direct 0.07% [kernel] [k] __mem_cgroup_commit_chargeNow, interestingly enough... The root drive (xvda) of the DomU in question is on a separate RAID1. This is passed as an LV. # dd if=/dev/zero of=/output.bin bs=1M count=4096 4096+0 records in 4096+0 records out 4294967296 bytes (4.3 GB) copied, 69.7036 s, 61.6 MB/s Then from the Dom0 to the same RAID1: # dd if=/dev/zero of=output.zero bs=1M count=4096 4096+0 records in 4096+0 records out 4294967296 bytes (4.3 GB) copied, 48.4407 s, 88.7 MB/sI don't really know what else I can do to try and see where the slowdown is here - I am open to suggestions though :) -- Steven Haigh Email: netwiz@xxxxxxxxx Web: https://www.crc.id.au Phone: (03) 9001 6090 - 0412 935 897 Fax: (03) 8338 0299 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |