Re: [Xen-devel] [PATCH] disable virtfs compilation by default in upstream QEMU

[Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx>]

Ian Jackson writes ("Re: [Xen-devel] [PATCH] disable virtfs compilation by 
default in upstream QEMU"):
> Stefano Stabellini writes ("[Xen-devel] [PATCH] disable virtfs compilation by 
> default in upstream QEMU"):
> > Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> 
> Committed-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>

In fact I did a build test before pushing and it failed.  See below.

The source directory /u/iwj/work/1/qemu-upstream-unstable.git contains
6d8b472233779c2a028a03843603030d2b1aee86 and I did a hg/git clean
before the build test.

So I have stripped out that changeset.

Ian.

make[3]: Leaving directory 
`/u/iwj/work/xen-unstable-tools.hg/tools/qemu-xen-traditional-dir'
make[2]: Leaving directory `/u/iwj/work/xen-unstable-tools.hg/tools'
make[2]: Entering directory `/u/iwj/work/xen-unstable-tools.hg/tools'
if test -d /u/iwj/work/1/qemu-upstream-unstable.git ; then \
                mkdir -p qemu-xen-dir; \
        else \
                export GIT=git; \
                
/u/iwj/work/xen-unstable-tools.hg/tools/../scripts/git-checkout.sh 
/u/iwj/work/1/qemu-upstream-unstable.git master qemu-xen-dir ; \
        fi
if test -d /u/iwj/work/1/qemu-upstream-unstable.git ; then \
                source=/u/iwj/work/1/qemu-upstream-unstable.git; \
        else \
                source=.; \
        fi; \
        cd qemu-xen-dir; \
        $source/configure --enable-xen --target-list=i386-softmmu \
                --source-path=$source \
                
--extra-cflags="-I/u/iwj/work/xen-unstable-tools.hg/tools/../tools/include \
                -I/u/iwj/work/xen-unstable-tools.hg/tools/../tools/libxc \
                -I/u/iwj/work/xen-unstable-tools.hg/tools/../tools/xenstore \
                
-I/u/iwj/work/xen-unstable-tools.hg/tools/../tools/xenstore/compat" \
                
--extra-ldflags="-L/u/iwj/work/xen-unstable-tools.hg/tools/../tools/libxc \
                -L/u/iwj/work/xen-unstable-tools.hg/tools/../tools/xenstore" \
                --bindir=/usr/lib/xen/bin \
                --datadir=/usr/share/qemu-xen \
                --disable-kvm \
                --disable-virtfs \
                --python=python \
                ; \
        make install
ERROR: unknown option --disable-virtfs

Usage: configure [options]
Options: [defaults in brackets after descriptions]

Standard options:
  --help                   print this message
  --prefix=PREFIX          install in PREFIX [/usr/local]
  --interp-prefix=PREFIX   where to find shared libraries, etc.
                           use %M for cpu name [/usr/gnemul/qemu-%M]
  --target-list=LIST       set target list (default: build everything)
                           Available targets: i386-softmmu x86_64-softmmu 
                           alpha-softmmu arm-softmmu cris-softmmu lm32-softmmu 
                           m68k-softmmu microblaze-softmmu microblazeel-softmmu 
                           mips-softmmu mipsel-softmmu mips64-softmmu 
                           mips64el-softmmu ppc-softmmu ppcemb-softmmu 
                           ppc64-softmmu sh4-softmmu sh4eb-softmmu 
                           sparc-softmmu sparc64-softmmu s390x-softmmu 
                           xtensa-softmmu xtensaeb-softmmu i386-linux-user 
                           x86_64-linux-user alpha-linux-user arm-linux-user 
                           armeb-linux-user cris-linux-user m68k-linux-user 
                           microblaze-linux-user microblazeel-linux-user 
                           mips-linux-user mipsel-linux-user ppc-linux-user 
                           ppc64-linux-user ppc64abi32-linux-user 
                           sh4-linux-user sh4eb-linux-user sparc-linux-user 
                           sparc64-linux-user sparc32plus-linux-user 
                           unicore32-linux-user s390x-linux-user 

Advanced options (experts only):
  --source-path=PATH       path of source code 
[/u/iwj/work/1/qemu-upstream-unstable.git]
  --cross-prefix=PREFIX    use PREFIX for compile tools []
  --cc=CC                  use C compiler CC [gcc]
  --host-cc=CC             use C compiler CC [gcc] for code run at
                           build time
  --extra-cflags=CFLAGS    append extra C compiler flags QEMU_CFLAGS
  --extra-ldflags=LDFLAGS  append extra linker flags LDFLAGS
  --make=MAKE              use specified make [make]
  --install=INSTALL        use specified install [install]
  --python=PYTHON          use specified python [python]
  --smbd=SMBD              use specified smbd [/usr/sbin/smbd]
  --static                 enable static build [no]
  --mandir=PATH            install man pages in PATH
  --datadir=PATH           install firmware in PATH
  --docdir=PATH            install documentation in PATH
  --bindir=PATH            install binaries in PATH
  --sysconfdir=PATH        install config in PATH/qemu
  --enable-debug-tcg       enable TCG debugging
  --disable-debug-tcg      disable TCG debugging (default)
  --enable-debug           enable common debug build options
  --enable-sparse          enable sparse checker
  --disable-sparse         disable sparse checker (default)
  --disable-strip          disable stripping binaries
  --disable-werror         disable compilation abort on warning
  --disable-sdl            disable SDL
  --enable-sdl             enable SDL
  --disable-vnc            disable VNC
  --enable-vnc             enable VNC
  --enable-cocoa           enable COCOA (Mac OS X only)
  --audio-drv-list=LIST    set audio drivers list:
                           Available drivers: oss alsa sdl esd pa fmod
  --audio-card-list=LIST   set list of emulated audio cards [ac97 es1370 sb16 
hda]
                           Available cards: ac97 es1370 sb16 cs4231a adlib gus 
hda
  --block-drv-whitelist=L  set block driver whitelist
                           (affects only QEMU, not qemu-img)
  --enable-mixemu          enable mixer emulation
  --disable-xen            disable xen backend driver support
  --enable-xen             enable xen backend driver support
  --disable-brlapi         disable BrlAPI
  --enable-brlapi          enable BrlAPI
  --disable-vnc-tls        disable TLS encryption for VNC server
  --enable-vnc-tls         enable TLS encryption for VNC server
  --disable-vnc-sasl       disable SASL encryption for VNC server
  --enable-vnc-sasl        enable SASL encryption for VNC server
  --disable-vnc-jpeg       disable JPEG lossy compression for VNC server
  --enable-vnc-jpeg        enable JPEG lossy compression for VNC server
  --disable-vnc-png        disable PNG compression for VNC server (default)
  --enable-vnc-png         enable PNG compression for VNC server
  --disable-vnc-thread     disable threaded VNC server
  --enable-vnc-thread      enable threaded VNC server
  --disable-curses         disable curses output
  --enable-curses          enable curses output
  --disable-curl           disable curl connectivity
  --enable-curl            enable curl connectivity
  --disable-fdt            disable fdt device tree
  --enable-fdt             enable fdt device tree
  --disable-check-utests   disable check unit-tests
  --enable-check-utests    enable check unit-tests
  --disable-bluez          disable bluez stack connectivity
  --enable-bluez           enable bluez stack connectivity
  --disable-slirp          disable SLIRP userspace network connectivity
  --disable-kvm            disable KVM acceleration support
  --enable-kvm             enable KVM acceleration support
  --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
  --disable-nptl           disable usermode NPTL support
  --enable-nptl            enable usermode NPTL support
  --enable-system          enable all system emulation targets
  --disable-system         disable all system emulation targets
  --enable-user            enable supported user emulation targets
  --disable-user           disable all user emulation targets
  --enable-linux-user      enable all linux usermode emulation targets
  --disable-linux-user     disable all linux usermode emulation targets
  --enable-darwin-user     enable all darwin usermode emulation targets
  --disable-darwin-user    disable all darwin usermode emulation targets
  --enable-bsd-user        enable all BSD usermode emulation targets
  --disable-bsd-user       disable all BSD usermode emulation targets
  --enable-guest-base      enable GUEST_BASE support for usermode
                           emulation targets
  --disable-guest-base     disable GUEST_BASE support
  --enable-pie             build Position Independent Executables
  --disable-pie            do not build Position Independent Executables
  --fmod-lib               path to FMOD library
  --fmod-inc               path to FMOD includes
  --oss-lib                path to OSS library
  --enable-uname-release=R Return R for uname -r in usermode emulation
  --cpu=CPU                Build for host CPU [i386]
  --sparc_cpu=V            Build qemu for Sparc architecture v7, v8, v8plus, 
v8plusa, v9
  --disable-uuid           disable uuid support
  --enable-uuid            enable uuid support
  --disable-vde            disable support for vde network
  --enable-vde             enable support for vde network
  --disable-linux-aio      disable Linux AIO support
  --enable-linux-aio       enable Linux AIO support
  --disable-attr           disables attr and xattr support
  --enable-attr            enable attr and xattr support
  --disable-blobs          disable installing provided firmware blobs
  --enable-docs            enable documentation build
  --disable-docs           disable documentation build
  --disable-vhost-net      disable vhost-net acceleration support
  --enable-vhost-net       enable vhost-net acceleration support
  --enable-trace-backend=B Set trace backend
                           Available backends: nop simple stderr ust dtrace
  --with-trace-file=NAME   Full PATH,NAME of file to store traces
                           Default:trace-<pid>
  --disable-spice          disable spice
  --enable-spice           enable spice
  --enable-rbd             enable building the rados block device (rbd)
  --disable-libiscsi       disable iscsi support
  --enable-libiscsi        enable iscsi support
  --disable-smartcard      disable smartcard support
  --enable-smartcard       enable smartcard support
  --disable-smartcard-nss  disable smartcard nss support
  --enable-smartcard-nss   enable smartcard nss support
  --disable-usb-redir      disable usb network redirection support
  --enable-usb-redir       enable usb network redirection support
  --disable-guest-agent    disable building of the QEMU Guest Agent
  --enable-guest-agent     enable building of the QEMU Guest Agent

NOTE: The object files are built at the place where configure is launched
make[3]: Entering directory 
`/u/iwj/work/xen-unstable-tools.hg/tools/qemu-xen-dir'
make[3]: *** No rule to make target `install'.  Stop.
make[3]: Leaving directory 
`/u/iwj/work/xen-unstable-tools.hg/tools/qemu-xen-dir'
make[2]: *** [subdir-install-qemu-xen-dir] Error 2
make[2]: Leaving directory `/u/iwj/work/xen-unstable-tools.hg/tools'
make[1]: *** [subdirs-install] Error 2
make[1]: Leaving directory `/u/iwj/work/xen-unstable-tools.hg/tools'
make: *** [install-tools] Error 2

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel