[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] no-carrier on qlogic 8242 10gig with linux 3.x running xen


  • To: xen-devel@xxxxxxxxxxxxxxxxxxx
  • From: Kristoffer Harthing Egefelt <k@xxxxxxx>
  • Date: Tue, 27 Mar 2012 14:31:43 -0700 (PDT)
  • Delivery-date: Tue, 27 Mar 2012 21:32:26 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xen.org>

Diffing the dmesg's from native linux 3.x and linux 3.x with xen shows 4 more
lines on the native:

Native:
 qlcnic 0000:03:00.0: phy port: 0 switch_mode: 0,
    max_tx_q: 1 max_rx_q: 8 min_tx_bw: 0x0,
    max_tx_bw: 0x64 max_mtu:0x2580, capabilities: 0x6affae
 qlcnic 0000:03:00.0: failed card response code:0x10
 qlcnic 0000:03:00.0: Can't get template size 16
 qlcnic 0000:03:00.0: firmware v4.7.83
 qlcnic: 24:b6:fd:64:1e:45: QME8242-k 10GbE Dual Port Mezzanine Card Board
Chip rev 0x54
* qlcnic 0000:03:00.0: irq 78 for MSI/MSI-X
 qlcnic 0000:03:00.0: irq 79 for MSI/MSI-X
 qlcnic 0000:03:00.0: irq 80 for MSI/MSI-X
 qlcnic 0000:03:00.0: irq 81 for MSI/MSI-X*
 qlcnic 0000:03:00.0: using msi-x interrupts
 qlcnic 0000:03:00.0: eth0: XGbE port initialized

The xen version of dmesg does not have these irq's:

XEN:
 qlcnic 0000:03:00.0: phy port: 0 switch_mode: 0,
    max_tx_q: 1 max_rx_q: 8 min_tx_bw: 0x0,
    max_tx_bw: 0x64 max_mtu:0x2580, capabilities: 0x6affae
 qlcnic 0000:03:00.0: failed card response code:0x10
 qlcnic 0000:03:00.0: Can't get template size 16
 qlcnic 0000:03:00.0: firmware v4.7.83
 qlcnic: 24:b6:fd:64:1e:45: QME8242-k 10GbE Dual Port Mezzanine Card Board
Chip rev 0x54
 qlcnic 0000:03:00.0: using msi-x interrupts
 qlcnic 0000:03:00.0: eth0: XGbE port initialized
 xen: registering gsi 38 triggering 0 polarity 1
 xen_map_pirq_gsi: returning irq 38 for gsi 38
 xen: --> pirq=38 -> irq=38 (gsi=38)
 Already setup the GSI :38

Does this make any sense?
I'm able to mod probe the qlcnic driver with options:
use_msi=0 and
use_msi_x=0
but this has no effect.



--
View this message in context: 
http://xen.1045712.n5.nabble.com/no-carrier-on-qlogic-8242-10gig-with-linux-3-x-running-xen-tp5597283p5598955.html
Sent from the Xen - Dev mailing list archive at Nabble.com.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.