|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] no-carrier on qlogic 8242 10gig with linux 3.x running xen
Please find dmesg below - do you see any hints? The onboard 1gig network cards are in fabric A, the 10gig's are in fabric B. I have disabled the onboard NICs so the 10gigs is eth0 and eth1. I have tried enabling the onboard NICs, making the 10gig's eth2 and eth3 without luck. Thanks oot@node0301:/var/log# cat dmesg.0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.9-1) (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Mar 4 22:48:17 UTC 2012 [ 0.000000] Command line: placeholder root=UUID=207d00d6-07a6-40e8-89dd-f0dd8a0cdbd1 ro quiet [ 0.000000] Freeing a0-100 pfn range: 96 pages freed [ 0.000000] 1-1 mapping on a0->100 [ 0.000000] Freeing cf379-100000 pfn range: 199815 pages freed [ 0.000000] 1-1 mapping on cf379->100000 [ 0.000000] Released 199911 pages of unused memory [ 0.000000] Set 199911 page(s) to 1-1 mapping [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000cf379000 (usable) [ 0.000000] Xen: 00000000cf379000 - 00000000cf38f000 (reserved) [ 0.000000] Xen: 00000000cf38f000 - 00000000cf3ce000 (ACPI data) [ 0.000000] Xen: 00000000cf3ce000 - 00000000d0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 0000000c30000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge M610/0V56FN, BIOS 6.0.7 08/18/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0xc30000 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xcf379 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] initial memory mapped : 0 - 02017000 [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf379000 [ 0.000000] 0000000000 - 00cf379000 page 4k [ 0.000000] kernel direct mapping tables up to cf379000 @ 981000-1000000 [ 0.000000] xen: setting RW the range fba000 - 1000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000c30000000 [ 0.000000] 0100000000 - 0c30000000 page 4k [ 0.000000] kernel direct mapping tables up to c30000000 @ c91c7000-cf379000 [ 0.000000] xen: setting RW the range ceb74000 - cf379000 [ 0.000000] RAMDISK: 0193b000 - 02017000 [ 0.000000] ACPI: RSDP 00000000000f1840 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f1944 0009C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000cf3b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000cf38f000 039D9 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cf3b6000 00040 [ 0.000000] ACPI: APIC 00000000cf3b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000cf3b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000cf3b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: XMAR 00000000cf3b3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000cf3b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: WD__ 00000000cf3b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SLIC 00000000cf3b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: ERST 00000000cf392b5c 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HEST 00000000cf392dcc 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: BERT 00000000cf3929dc 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: EINJ 00000000cf392a0c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SRAT 00000000cf3b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: TCPA 00000000cf3b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SSDT 00000000cf3b7000 065DC (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000c30000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000c30000000 [ 0.000000] NODE_DATA [0000000bcf691000 - 0000000bcf695fff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00c30000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000cf379 [ 0.000000] 0: 0x00100000 -> 0x00c30000 [ 0.000000] On node 0 totalpages: 12579593 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1598 pages reserved [ 0.000000] DMA zone: 2330 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 830385 pages, LIFO batch:31 [ 0.000000] Normal zone: 160384 pages used for memmap [ 0.000000] Normal zone: 11570560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 1/0x20, fixing up to 0x10 [ 0.000000] BIOS bug: APIC version mismatch, boot CPU: 0, CPU 1: version 10 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32]) [ 0.000000] IOAPIC[1]: apic_id 1, version 255, address 0xfec80000, GSI 32-287 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 32 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 304 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cf379000 - 00000000cf38f000 [ 0.000000] PM: Registered nosave memory: 00000000cf38f000 - 00000000cf3ce000 [ 0.000000] PM: Registered nosave memory: 00000000cf3ce000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.2 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880bcf2be000 s82304 r8192 d24192 u114688 [ 0.000000] pcpu-alloc: s82304 r8192 d24192 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 [ 9.437371] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12403275 [ 9.437373] Policy zone: Normal [ 9.437376] Kernel command line: placeholder root=UUID=207d00d6-07a6-40e8-89dd-f0dd8a0cdbd1 ro quiet [ 9.437424] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 9.470012] Placing 64MB software IO TLB between ffff880bcae00000 - ffff880bcee00000 [ 9.470016] software IO TLB at phys 0xbcae00000 - 0xbcee00000 [ 9.708326] Memory: 47765528k/51118080k available (3371k kernel code, 799708k absent, 2552844k reserved, 3360k data, 568k init) [ 9.708508] Hierarchical RCU implementation. [ 9.708510] RCU dyntick-idle grace-period acceleration is enabled. [ 9.708550] NR_IRQS:33024 nr_irqs:5424 16 [ 9.708659] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 9.708662] xen: registering gsi 9 triggering 0 polarity 0 [ 9.708674] xen: --> pirq=9 -> irq=9 (gsi=9) [ 9.708707] xen: acpi sci 9 [ 9.708711] xen: --> pirq=1 -> irq=1 (gsi=1) [ 9.708715] xen: --> pirq=2 -> irq=2 (gsi=2) [ 9.708718] xen: --> pirq=3 -> irq=3 (gsi=3) [ 9.708721] xen: --> pirq=4 -> irq=4 (gsi=4) [ 9.708724] xen: --> pirq=5 -> irq=5 (gsi=5) [ 9.708728] xen: --> pirq=6 -> irq=6 (gsi=6) [ 9.708731] xen: --> pirq=7 -> irq=7 (gsi=7) [ 9.708734] xen: --> pirq=8 -> irq=8 (gsi=8) [ 9.708737] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 9.708739] xen: --> pirq=9 -> irq=9 (gsi=9) [ 9.708742] xen: --> pirq=10 -> irq=10 (gsi=10) [ 9.708745] xen: --> pirq=11 -> irq=11 (gsi=11) [ 9.708749] xen: --> pirq=12 -> irq=12 (gsi=12) [ 9.708752] xen: --> pirq=13 -> irq=13 (gsi=13) [ 9.708756] xen: --> pirq=14 -> irq=14 (gsi=14) [ 9.708759] xen: --> pirq=15 -> irq=15 (gsi=15) [ 9.714847] Console: colour VGA+ 80x25 [ 9.714873] console [tty0] enabled [ 9.714932] Xen: using vcpuop timer interface [ 9.714938] installing Xen timer for CPU 0 [ 9.714963] Detected 2394.050 MHz processor. [ 9.714977] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.10 BogoMIPS (lpj=9576200) [ 9.714981] pid_max: default: 32768 minimum: 301 [ 9.715038] Security Framework initialized [ 9.715044] AppArmor: AppArmor disabled by boot time parameter [ 9.731180] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 9.754400] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 9.762236] Mount-cache hash table entries: 256 [ 9.762443] Initializing cgroup subsys cpuacct [ 9.762451] Initializing cgroup subsys memory [ 9.762476] Initializing cgroup subsys devices [ 9.762479] Initializing cgroup subsys freezer [ 9.762482] Initializing cgroup subsys net_cls [ 9.762484] Initializing cgroup subsys blkio [ 9.762494] Initializing cgroup subsys perf_event [ 9.762569] CPU: Physical Processor ID: 1 [ 9.762571] CPU: Processor Core ID: 0 [ 9.763087] ACPI: Core revision 20110623 [ 9.774492] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. [ 9.774695] NMI watchdog disabled (cpu0): hardware events not enabled [ 9.774835] installing Xen timer for CPU 1 [ 9.775022] NMI watchdog disabled (cpu1): hardware events not enabled [ 9.775154] installing Xen timer for CPU 2 [ 9.775277] NMI watchdog disabled (cpu2): hardware events not enabled [ 9.775405] installing Xen timer for CPU 3 [ 9.775521] NMI watchdog disabled (cpu3): hardware events not enabled [ 9.775651] installing Xen timer for CPU 4 [ 9.775773] NMI watchdog disabled (cpu4): hardware events not enabled [ 9.775898] installing Xen timer for CPU 5 [ 9.776016] NMI watchdog disabled (cpu5): hardware events not enabled [ 9.776145] installing Xen timer for CPU 6 [ 9.776267] NMI watchdog disabled (cpu6): hardware events not enabled [ 9.776393] installing Xen timer for CPU 7 [ 9.776511] NMI watchdog disabled (cpu7): hardware events not enabled [ 9.776638] installing Xen timer for CPU 8 [ 9.776760] NMI watchdog disabled (cpu8): hardware events not enabled [ 9.776889] installing Xen timer for CPU 9 [ 9.777009] NMI watchdog disabled (cpu9): hardware events not enabled [ 9.777136] installing Xen timer for CPU 10 [ 9.777259] NMI watchdog disabled (cpu10): hardware events not enabled [ 9.777390] installing Xen timer for CPU 11 [ 9.777507] NMI watchdog disabled (cpu11): hardware events not enabled [ 9.777644] installing Xen timer for CPU 12 [ 9.777826] NMI watchdog disabled (cpu12): hardware events not enabled [ 9.777960] installing Xen timer for CPU 13 [ 9.778111] NMI watchdog disabled (cpu13): hardware events not enabled [ 9.778243] installing Xen timer for CPU 14 [ 9.778400] NMI watchdog disabled (cpu14): hardware events not enabled [ 9.778535] installing Xen timer for CPU 15 [ 9.778686] NMI watchdog disabled (cpu15): hardware events not enabled [ 9.778815] installing Xen timer for CPU 16 [ 9.778977] NMI watchdog disabled (cpu16): hardware events not enabled [ 9.779107] installing Xen timer for CPU 17 [ 9.779260] NMI watchdog disabled (cpu17): hardware events not enabled [ 9.779394] installing Xen timer for CPU 18 [ 9.779554] NMI watchdog disabled (cpu18): hardware events not enabled [ 9.779683] installing Xen timer for CPU 19 [ 9.779837] NMI watchdog disabled (cpu19): hardware events not enabled [ 9.779969] installing Xen timer for CPU 20 [ 9.780127] NMI watchdog disabled (cpu20): hardware events not enabled [ 9.780256] installing Xen timer for CPU 21 [ 9.780408] NMI watchdog disabled (cpu21): hardware events not enabled [ 9.780540] installing Xen timer for CPU 22 [ 9.780699] NMI watchdog disabled (cpu22): hardware events not enabled [ 9.780828] installing Xen timer for CPU 23 [ 9.780982] NMI watchdog disabled (cpu23): hardware events not enabled [ 9.781006] Brought up 24 CPUs [ 9.781867] devtmpfs: initialized [ 9.789356] Grant table initialized [ 9.789440] print_constraints: dummy: [ 9.789642] NET: Registered protocol family 16 [ 9.789890] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 9.789893] ACPI: bus type pci registered [ 9.790011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 9.790015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 9.850148] PCI: Using configuration type 1 for base access [ 9.853088] bio: create slab <bio-0> at 0 [ 9.853502] ACPI: Added _OSI(Module Device) [ 9.853506] ACPI: Added _OSI(Processor Device) [ 9.853509] ACPI: Added _OSI(3.0 _SCP Extensions) [ 9.853511] ACPI: Added _OSI(Processor Aggregator Device) [ 9.854952] ACPI: EC: Look up EC in DSDT [ 9.857408] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 9.865597] ACPI: Interpreter enabled [ 9.865602] ACPI: (supports S0 S4 S5) [ 9.865618] ACPI: Using IOAPIC for interrupt routing [ 9.871351] ACPI: No dock devices found. [ 9.871638] HEST: Table parsing has been initialized. [ 9.871642] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 9.872209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 9.872677] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 9.872680] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 9.872683] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 9.872685] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfdffffff] [ 9.872688] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 9.872715] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600 [ 9.872829] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 9.872835] pci 0000:00:00.0: PME# disabled [ 9.872881] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 9.873000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 9.873006] pci 0000:00:01.0: PME# disabled [ 9.873058] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 9.873179] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 9.873184] pci 0000:00:07.0: PME# disabled [ 9.873231] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 9.873351] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 9.873357] pci 0000:00:09.0: PME# disabled [ 9.873409] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 9.873550] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 9.873689] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 9.873854] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 9.873932] pci 0000:00:1a.0: reg 20: [io 0xe8c0-0xe8df] [ 9.874026] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 9.874104] pci 0000:00:1a.1: reg 20: [io 0xe8e0-0xe8ff] [ 9.874215] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 9.874251] pci 0000:00:1a.7: reg 10: [mem 0xdffff800-0xdffffbff] [ 9.874410] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 9.874417] pci 0000:00:1a.7: PME# disabled [ 9.874454] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 9.874589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 9.874594] pci 0000:00:1c.0: PME# disabled [ 9.874646] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 9.874724] pci 0000:00:1d.0: reg 20: [io 0xec00-0xec1f] [ 9.874818] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 9.874897] pci 0000:00:1d.1: reg 20: [io 0xec20-0xec3f] [ 9.874990] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 9.875068] pci 0000:00:1d.2: reg 20: [io 0xec40-0xec5f] [ 9.875178] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 9.875214] pci 0000:00:1d.7: reg 10: [mem 0xdffffc00-0xdfffffff] [ 9.875373] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 9.875380] pci 0000:00:1d.7: PME# disabled [ 9.875414] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 9.875532] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601 [ 9.875666] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 9.875670] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 9.875675] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f) [ 9.875758] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 [ 9.875787] pci 0000:00:1f.5: reg 10: [io 0xece0-0xece7] [ 9.875801] pci 0000:00:1f.5: reg 14: [io 0xecf8-0xecfb] [ 9.875815] pci 0000:00:1f.5: reg 18: [io 0xece8-0xecef] [ 9.875830] pci 0000:00:1f.5: reg 1c: [io 0xecfc-0xecff] [ 9.875844] pci 0000:00:1f.5: reg 20: [io 0xecb0-0xecbf] [ 9.875859] pci 0000:00:1f.5: reg 24: [io 0xecc0-0xeccf] [ 9.876012] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 9.876127] pci 0000:03:00.0: [1077:8020] type 0 class 0x000200 [ 9.876153] pci 0000:03:00.0: reg 10: [mem 0xdf800000-0xdf9fffff 64bit] [ 9.876198] pci 0000:03:00.0: reg 20: [mem 0xdfde0000-0xdfdeffff 64bit] [ 9.876213] pci 0000:03:00.0: reg 30: [mem 0xdfd80000-0xdfdbffff pref] [ 9.876297] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 9.876303] pci 0000:03:00.0: PME# disabled [ 9.876353] pci 0000:03:00.1: [1077:8020] type 0 class 0x000200 [ 9.876379] pci 0000:03:00.1: reg 10: [mem 0xdfa00000-0xdfbfffff 64bit] [ 9.876424] pci 0000:03:00.1: reg 20: [mem 0xdfdf0000-0xdfdfffff 64bit] [ 9.876439] pci 0000:03:00.1: reg 30: [mem 0xdfd80000-0xdfdbffff pref] [ 9.876523] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 9.876529] pci 0000:03:00.1: PME# disabled [ 9.881935] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 9.881948] pci 0000:00:07.0: bridge window [mem 0xdf800000-0xdfdfffff] [ 9.882041] pci 0000:00:09.0: PCI bridge to [bus 04-04] [ 9.882152] pci 0000:02:00.0: [1000:0079] type 0 class 0x000104 [ 9.882176] pci 0000:02:00.0: reg 10: [io 0xfc00-0xfcff] [ 9.882202] pci 0000:02:00.0: reg 14: [mem 0xdfefc000-0xdfefffff 64bit] [ 9.882229] pci 0000:02:00.0: reg 1c: [mem 0xdfe40000-0xdfe7ffff 64bit] [ 9.882262] pci 0000:02:00.0: reg 30: [mem 0xdfe80000-0xdfebffff pref] [ 9.882368] pci 0000:02:00.0: supports D1 D2 [ 9.890028] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 9.890038] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff] [ 9.890046] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 9.890133] pci 0000:05:03.0: [102b:0532] type 0 class 0x000300 [ 9.890162] pci 0000:05:03.0: reg 10: [mem 0xde000000-0xde7fffff pref] [ 9.890178] pci 0000:05:03.0: reg 14: [mem 0xdf7fc000-0xdf7fffff] [ 9.890194] pci 0000:05:03.0: reg 18: [mem 0xde800000-0xdeffffff] [ 9.890251] pci 0000:05:03.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 9.890364] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 9.890374] pci 0000:00:1e.0: bridge window [mem 0xde800000-0xdf7fffff] [ 9.890383] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xde7fffff 64bit pref] [ 9.890387] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 9.890390] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 9.890393] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 9.890396] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff] (subtractive decode) [ 9.890399] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 9.890440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.891385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 9.891559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 9.891725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT] [ 9.891887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] [ 9.892044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] [ 9.892454] pci0000:00: Requesting ACPI _OSC control (0x15) [ 9.893138] pci0000:00: ACPI _OSC control (0x15) granted [ 9.898687] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15) [ 9.898815] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15) [ 9.898943] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15) [ 9.899066] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15) [ 9.899188] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 9.899311] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15) [ 9.899433] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 9.899557] ACPI: PCI Interrupt Link [LK07] (IRQs 3 *4 5 6 7 10 11 14 15) [ 9.899623] xen/balloon: Initialising balloon driver. [ 9.907655] xen-balloon: Initialising balloon driver. [ 9.907830] vgaarb: device added: PCI:0000:05:03.0,decodes=io+mem,owns=io+mem,locks=none [ 9.907833] vgaarb: loaded [ 9.907835] vgaarb: bridge control possible 0000:05:03.0 [ 9.907884] PCI: Using ACPI for IRQ routing [ 9.919996] PCI: Discovered peer bus fe [ 9.920065] pci 0000:fe:00.0: [8086:2c70] type 0 class 0x000600 [ 9.920129] pci 0000:fe:00.1: [8086:2d81] type 0 class 0x000600 [ 9.920194] pci 0000:fe:02.0: [8086:2d90] type 0 class 0x000600 [ 9.920251] pci 0000:fe:02.1: [8086:2d91] type 0 class 0x000600 [ 9.920307] pci 0000:fe:02.2: [8086:2d92] type 0 class 0x000600 [ 9.920363] pci 0000:fe:02.3: [8086:2d93] type 0 class 0x000600 [ 9.920420] pci 0000:fe:02.4: [8086:2d94] type 0 class 0x000600 [ 9.920476] pci 0000:fe:02.5: [8086:2d95] type 0 class 0x000600 [ 9.920535] pci 0000:fe:03.0: [8086:2d98] type 0 class 0x000600 [ 9.920591] pci 0000:fe:03.1: [8086:2d99] type 0 class 0x000600 [ 9.920647] pci 0000:fe:03.2: [8086:2d9a] type 0 class 0x000600 [ 9.920705] pci 0000:fe:03.4: [8086:2d9c] type 0 class 0x000600 [ 9.920765] pci 0000:fe:04.0: [8086:2da0] type 0 class 0x000600 [ 9.920821] pci 0000:fe:04.1: [8086:2da1] type 0 class 0x000600 [ 9.920877] pci 0000:fe:04.2: [8086:2da2] type 0 class 0x000600 [ 9.920933] pci 0000:fe:04.3: [8086:2da3] type 0 class 0x000600 [ 9.920995] pci 0000:fe:05.0: [8086:2da8] type 0 class 0x000600 [ 9.921051] pci 0000:fe:05.1: [8086:2da9] type 0 class 0x000600 [ 9.921107] pci 0000:fe:05.2: [8086:2daa] type 0 class 0x000600 [ 9.921166] pci 0000:fe:05.3: [8086:2dab] type 0 class 0x000600 [ 9.921232] pci 0000:fe:06.0: [8086:2db0] type 0 class 0x000600 [ 9.921289] pci 0000:fe:06.1: [8086:2db1] type 0 class 0x000600 [ 9.921345] pci 0000:fe:06.2: [8086:2db2] type 0 class 0x000600 [ 9.921401] pci 0000:fe:06.3: [8086:2db3] type 0 class 0x000600 [ 9.922214] PCI: Discovered peer bus ff [ 9.922260] pci 0000:ff:00.0: [8086:2c70] type 0 class 0x000600 [ 9.922320] pci 0000:ff:00.1: [8086:2d81] type 0 class 0x000600 [ 9.922388] pci 0000:ff:02.0: [8086:2d90] type 0 class 0x000600 [ 9.922447] pci 0000:ff:02.1: [8086:2d91] type 0 class 0x000600 [ 9.922506] pci 0000:ff:02.2: [8086:2d92] type 0 class 0x000600 [ 9.922564] pci 0000:ff:02.3: [8086:2d93] type 0 class 0x000600 [ 9.922623] pci 0000:ff:02.4: [8086:2d94] type 0 class 0x000600 [ 9.922682] pci 0000:ff:02.5: [8086:2d95] type 0 class 0x000600 [ 9.922743] pci 0000:ff:03.0: [8086:2d98] type 0 class 0x000600 [ 9.922802] pci 0000:ff:03.1: [8086:2d99] type 0 class 0x000600 [ 9.922860] pci 0000:ff:03.2: [8086:2d9a] type 0 class 0x000600 [ 9.922920] pci 0000:ff:03.4: [8086:2d9c] type 0 class 0x000600 [ 9.922983] pci 0000:ff:04.0: [8086:2da0] type 0 class 0x000600 [ 9.923042] pci 0000:ff:04.1: [8086:2da1] type 0 class 0x000600 [ 9.923100] pci 0000:ff:04.2: [8086:2da2] type 0 class 0x000600 [ 9.923159] pci 0000:ff:04.3: [8086:2da3] type 0 class 0x000600 [ 9.923223] pci 0000:ff:05.0: [8086:2da8] type 0 class 0x000600 [ 9.923282] pci 0000:ff:05.1: [8086:2da9] type 0 class 0x000600 [ 9.923341] pci 0000:ff:05.2: [8086:2daa] type 0 class 0x000600 [ 9.923399] pci 0000:ff:05.3: [8086:2dab] type 0 class 0x000600 [ 9.923465] pci 0000:ff:06.0: [8086:2db0] type 0 class 0x000600 [ 9.923524] pci 0000:ff:06.1: [8086:2db1] type 0 class 0x000600 [ 9.923582] pci 0000:ff:06.2: [8086:2db2] type 0 class 0x000600 [ 9.923643] pci 0000:ff:06.3: [8086:2db3] type 0 class 0x000600 [ 9.924469] PCI: pci_cache_line_size set to 64 bytes [ 9.924766] reserve RAM buffer: 00000000cf379000 - 00000000cfffffff [ 9.924963] Switching to clocksource xen [ 9.927723] pnp: PnP ACPI init [ 9.927740] ACPI: bus type pnp registered [ 9.928034] pnp 00:00: [bus 00-ff] [ 9.928037] pnp 00:00: [io 0x0cf8-0x0cff] [ 9.928040] pnp 00:00: [io 0x0000-0x0cf7 window] [ 9.928044] pnp 00:00: [io 0x0d00-0xffff window] [ 9.928047] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 9.928050] pnp 00:00: [mem 0xd0000000-0xfdffffff window] [ 9.928052] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 9.928144] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 9.928236] pnp 00:01: [io 0x0080-0x009f] [ 9.928239] pnp 00:01: [io 0x0000-0x001f] [ 9.928242] pnp 00:01: [io 0x00c0-0x00df] [ 9.928244] pnp 00:01: [dma 4] [ 9.928287] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 9.928328] pnp 00:02: [io 0x00f0-0x00ff] [ 9.928332] xen: registering gsi 13 triggering 1 polarity 0 [ 9.928338] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 9.928341] xen: --> pirq=13 -> irq=13 (gsi=13) [ 9.928374] pnp 00:02: [irq 13] [ 9.928418] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 9.928461] pnp 00:03: [io 0x0061] [ 9.928554] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 9.928596] pnp 00:04: [io 0x0070-0x007f] [ 9.928599] xen: registering gsi 8 triggering 1 polarity 0 [ 9.928602] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 9.928604] xen: --> pirq=8 -> irq=8 (gsi=8) [ 9.928634] pnp 00:04: [irq 8] [ 9.928676] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 9.928913] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled) [ 9.929754] pnp 00:06: [io 0x0800-0x087f] [ 9.929757] pnp 00:06: [io 0x00e0-0x00e7] [ 9.929759] pnp 00:06: [io 0x0880-0x08ff] [ 9.929762] pnp 00:06: [io 0x0900-0x091f] [ 9.929764] pnp 00:06: [io 0x0920-0x0923] [ 9.929767] pnp 00:06: [io 0x0924] [ 9.929769] pnp 00:06: [io 0x0ca0-0x0ca7] [ 9.929773] pnp 00:06: [io 0x0ca9-0x0cab] [ 9.929775] pnp 00:06: [io 0x0cad-0x0caf] [ 9.929778] pnp 00:06: [io 0x0060-0x005f disabled] [ 9.929781] pnp 00:06: [io 0x0064-0x0063 disabled] [ 9.929882] system 00:06: [io 0x0800-0x087f] has been reserved [ 9.929885] system 00:06: [io 0x0880-0x08ff] has been reserved [ 9.929888] system 00:06: [io 0x0900-0x091f] has been reserved [ 9.929892] system 00:06: [io 0x0920-0x0923] has been reserved [ 9.929895] system 00:06: [io 0x0924] has been reserved [ 9.929898] system 00:06: [io 0x0ca0-0x0ca7] has been reserved [ 9.929901] system 00:06: [io 0x0ca9-0x0cab] has been reserved [ 9.929904] system 00:06: [io 0x0cad-0x0caf] has been reserved [ 9.929908] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 9.930002] pnp 00:07: [io 0x0ca8] [ 9.930004] pnp 00:07: [io 0x0cac] [ 9.930007] pnp 00:07: [irq 0 disabled] [ 9.930098] system 00:07: [io 0x0ca8] has been reserved [ 9.930102] system 00:07: [io 0x0cac] has been reserved [ 9.930105] system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 9.931369] pnp 00:08: [mem 0xe0000000-0xefffffff] [ 9.931473] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 9.931477] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.931578] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 9.931625] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) [ 9.931652] pnp 00:0a: [mem 0xfed90000-0xfed91fff] [ 9.931745] system 00:0a: [mem 0xfed90000-0xfed91fff] has been reserved [ 9.931749] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.932093] pnp: PnP ACPI: found 11 devices [ 9.932095] ACPI: ACPI bus type pnp unregistered [ 9.939973] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 9.939990] pci 0000:03:00.1: address space collision: [mem 0xdfd80000-0xdfdbffff pref] conflicts with 0000:03:00.0 [mem 0xdfd80000-0xdfdbffff pref] [ 9.940022] PCI: max bus depth: 1 pci_try_num: 2 [ 9.940090] pci 0000:00:07.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff pref] [ 9.940094] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 9.940111] pci 0000:03:00.1: BAR 6: assigned [mem 0xd0000000-0xd003ffff pref] [ 9.940114] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 9.940121] pci 0000:00:07.0: bridge window [mem 0xdf800000-0xdfdfffff] [ 9.940127] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xd00fffff pref] [ 9.940136] pci 0000:00:09.0: PCI bridge to [bus 04-04] [ 9.940152] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 9.940156] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff] [ 9.940164] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 9.940178] pci 0000:05:03.0: BAR 6: assigned [mem 0xdf000000-0xdf00ffff pref] [ 9.940180] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 9.940188] pci 0000:00:1e.0: bridge window [mem 0xde800000-0xdf7fffff] [ 9.940194] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xde7fffff 64bit pref] [ 9.940212] xen: registering gsi 53 triggering 0 polarity 1 [ 9.940233] xen: --> pirq=53 -> irq=53 (gsi=53) [ 9.940264] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 9.940271] pci 0000:00:01.0: setting latency timer to 64 [ 9.940280] xen: registering gsi 53 triggering 0 polarity 1 [ 9.940283] xen_map_pirq_gsi: returning irq 53 for gsi 53 [ 9.940285] xen: --> pirq=53 -> irq=53 (gsi=53) [ 9.940287] Already setup the GSI :53 [ 9.940289] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 9.940295] pci 0000:00:07.0: setting latency timer to 64 [ 9.940303] xen: registering gsi 53 triggering 0 polarity 1 [ 9.940306] xen_map_pirq_gsi: returning irq 53 for gsi 53 [ 9.940308] xen: --> pirq=53 -> irq=53 (gsi=53) [ 9.940310] Already setup the GSI :53 [ 9.940312] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 9.940318] pci 0000:00:09.0: setting latency timer to 64 [ 9.940327] xen: registering gsi 16 triggering 0 polarity 1 [ 9.940339] xen: --> pirq=16 -> irq=16 (gsi=16) [ 9.940367] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.940373] pci 0000:00:1c.0: setting latency timer to 64 [ 9.940384] pci 0000:00:1e.0: setting latency timer to 64 [ 9.940390] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 9.940392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 9.940395] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 9.940397] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff] [ 9.940400] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 9.940403] pci_bus 0000:03: resource 1 [mem 0xdf800000-0xdfdfffff] [ 9.940405] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff pref] [ 9.940408] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 9.940410] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff] [ 9.940413] pci_bus 0000:05: resource 1 [mem 0xde800000-0xdf7fffff] [ 9.940416] pci_bus 0000:05: resource 2 [mem 0xde000000-0xde7fffff 64bit pref] [ 9.940418] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 9.940421] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 9.940423] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 9.940426] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xfdffffff] [ 9.940428] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff] [ 9.940430] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 9.940433] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff] [ 9.940436] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 9.940438] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff] [ 9.940731] NET: Registered protocol family 2 [ 9.941979] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 9.945109] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 9.947245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 9.947498] TCP: Hash tables configured (established 524288 bind 65536) [ 9.947501] TCP reno registered [ 9.947762] UDP hash table entries: 32768 (order: 8, 1048576 bytes) [ 9.948303] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) [ 9.948922] NET: Registered protocol family 1 [ 9.948973] xen: registering gsi 17 triggering 0 polarity 1 [ 9.948999] xen: --> pirq=17 -> irq=17 (gsi=17) [ 9.949034] pci 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.949060] pci 0000:00:1a.0: PCI INT A disabled [ 9.949069] xen: registering gsi 18 triggering 0 polarity 1 [ 9.949077] xen: --> pirq=18 -> irq=18 (gsi=18) [ 9.949121] pci 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 9.949145] pci 0000:00:1a.1: PCI INT B disabled [ 9.949155] xen: registering gsi 19 triggering 0 polarity 1 [ 9.949164] xen: --> pirq=19 -> irq=19 (gsi=19) [ 9.949193] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 9.965133] pci 0000:00:1a.7: PCI INT C disabled [ 9.965152] xen: registering gsi 21 triggering 0 polarity 1 [ 9.965174] xen: --> pirq=21 -> irq=21 (gsi=21) [ 9.965203] pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.965228] pci 0000:00:1d.0: PCI INT A disabled [ 9.965237] xen: registering gsi 20 triggering 0 polarity 1 [ 9.965245] xen: --> pirq=20 -> irq=20 (gsi=20) [ 9.965273] pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 9.965298] pci 0000:00:1d.1: PCI INT B disabled [ 9.965306] xen: registering gsi 21 triggering 0 polarity 1 [ 9.965310] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 9.965312] xen: --> pirq=21 -> irq=21 (gsi=21) [ 9.965313] Already setup the GSI :21 [ 9.965316] pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 9.965340] pci 0000:00:1d.2: PCI INT C disabled [ 9.965350] xen: registering gsi 21 triggering 0 polarity 1 [ 9.965353] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 9.965355] xen: --> pirq=21 -> irq=21 (gsi=21) [ 9.965357] Already setup the GSI :21 [ 9.965360] pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.965428] pci 0000:00:1d.7: PCI INT A disabled [ 9.965460] pci 0000:05:03.0: Boot video device [ 9.965589] PCI: CLS 64 bytes, default 64 [ 9.965654] Unpacking initramfs... [ 9.973773] Freeing initrd memory: 7024k freed [ 9.977353] audit: initializing netlink socket (disabled) [ 9.977372] type=2000 audit(1332837366.954:1): initialized [ 10.085691] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 10.086520] VFS: Disk quotas dquot_6.5.2 [ 10.086605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 10.086754] msgmni has been set to 32768 [ 10.087049] alg: No test for stdrng (krng) [ 10.087130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 10.087134] io scheduler noop registered [ 10.087137] io scheduler deadline registered [ 10.087230] io scheduler cfq registered (default) [ 10.087524] pcieport 0000:00:01.0: setting latency timer to 64 [ 10.087747] pcieport 0000:00:07.0: setting latency timer to 64 [ 10.087931] pcieport 0000:00:09.0: setting latency timer to 64 [ 10.088112] pcieport 0000:00:1c.0: setting latency timer to 64 [ 10.088384] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 10.088391] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 10.088434] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 10.088437] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 10.088440] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt [ 10.088446] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded [ 10.088488] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 10.088495] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 10.088536] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 10.088539] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 10.088546] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 10.088889] ERST: Error Record Serialization Table (ERST) support is initialized. [ 10.089314] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 10.089794] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 10.281389] serial 00:05: [io 0x03f8-0x03ff] [ 10.281682] serial 00:05: [irq 4] [ 10.282732] serial 00:05: activated [ 10.303488] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.345589] hpet_acpi_add: no address or irqs in _CRS [ 10.345610] Linux agpgart interface v0.103 [ 10.346005] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 10.346899] i8042: No controller found [ 10.347135] mousedev: PS/2 mouse device common for all mice [ 10.347209] rtc_cmos 00:04: RTC can wake from S4 [ 10.347419] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 10.347505] rtc0: alarms up to one day, y3k, 242 bytes nvram [ 10.347888] TCP cubic registered [ 10.348243] NET: Registered protocol family 10 [ 10.349231] Mobile IPv6 [ 10.349236] NET: Registered protocol family 17 [ 10.349244] Registering the dns_resolver key type [ 10.349528] PM: Hibernation image not present or could not be loaded. [ 10.349544] registered taskstats version 1 [ 10.350564] rtc_cmos 00:04: setting system clock to 2012-03-27 08:36:06 UTC (1332837366) [ 10.350629] Initializing network drop monitor service [ 10.351155] Freeing unused kernel memory: 568k freed [ 10.351327] Write protecting the kernel read-only data: 6144k [ 10.355543] Freeing unused kernel memory: 708k freed [ 10.356179] Freeing unused kernel memory: 684k freed [ 10.399054] udevd[137]: starting version 175 [ 10.459886] SCSI subsystem initialized [ 10.463090] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [ 10.463140] megasas: 0x1000:0x0079:0x1028:0x1f18: bus 2:slot 0:func 0 [ 10.463176] xen: registering gsi 16 triggering 0 polarity 1 [ 10.463192] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 10.463200] xen: --> pirq=16 -> irq=16 (gsi=16) [ 10.463208] Already setup the GSI :16 [ 10.463217] megaraid_sas 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.463237] megaraid_sas 0000:02:00.0: setting latency timer to 64 [ 10.463521] megasas: FW now in Ready state [ 10.493120] megasas_init_mfi: fw_support_ieee=67108864 [ 10.493124] megasas: INIT adapter done [ 10.565189] scsi0 : LSI SAS based MegaRAID driver [ 10.566278] scsi 0:0:0:0: Direct-Access SEAGATE ST9600205SS CS05 PQ: 0 ANSI: 5 [ 10.566872] scsi 0:0:1:0: Direct-Access SEAGATE ST9600205SS CS05 PQ: 0 ANSI: 5 [ 10.621790] scsi 0:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5 [ 10.645346] scsi 0:2:0:0: Direct-Access DELL PERC H700 2.10 PQ: 0 ANSI: 5 [ 10.673255] sd 0:2:0:0: [sda] 1170997248 512-byte logical blocks: (599 GB/558 GiB) [ 10.673377] sd 0:2:0:0: [sda] Write Protect is off [ 10.673382] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08 [ 10.673460] sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.674583] sda: sda1 sda2 sda3 [ 10.675266] sd 0:2:0:0: [sda] Attached SCSI disk [ 11.001691] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.002597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.021365] device-mapper: uevent: version 1.0.3 [ 11.021562] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 11.237755] PM: Starting manual resume from disk [ 11.237761] PM: Hibernation image partition 8:2 present [ 11.237764] PM: Looking for hibernation image. [ 11.237953] PM: Image not found (code -22) [ 11.237956] PM: Hibernation image not present or could not be loaded. [ 11.254893] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 11.254898] EXT4-fs (sda1): write access will be enabled during recovery [ 11.280435] EXT4-fs (sda1): recovery complete [ 11.280594] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 12.225576] udevd[386]: starting version 175 [ 12.502908] ACPI Error: No handler for Region [IPMI] (ffff880b9a0c6420) [IPMI] (20110623/evregion-373) [ 12.502923] ACPI Error: Region IPMI (ID=7) has no handler (20110623/exfldio-292) [ 12.502938] ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff880b9a0c54c0), AE_NOT_EXIST (20110623/psparse-536) [ 12.502964] ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff880b9a0c5560), AE_NOT_EXIST (20110623/psparse-536) [ 12.502995] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20110623/power_meter-773) [ 12.569083] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 12.569101] ACPI: Power Button [PWRF] [ 12.593188] libata version 3.00 loaded. [ 12.599014] ata_piix 0000:00:1f.5: version 2.13 [ 12.599040] xen: registering gsi 17 triggering 0 polarity 1 [ 12.599054] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 12.599058] xen: --> pirq=17 -> irq=17 (gsi=17) [ 12.599062] Already setup the GSI :17 [ 12.599067] ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 12.599078] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 12.605513] usbcore: registered new interface driver usbfs [ 12.605563] usbcore: registered new interface driver hub [ 12.605654] usbcore: registered new device driver usb [ 12.629687] EDAC MC: Ver: 2.1.0 [ 12.631709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.636599] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 12.639344] iTCO_vendor_support: vendor-support=0 [ 12.642455] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 12.642595] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 12.642715] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.646309] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 12.696167] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25 [ 12.696278] xen: registering gsi 38 triggering 0 polarity 1 [ 12.696304] xen: --> pirq=38 -> irq=38 (gsi=38) [ 12.696340] qlcnic 0000:03:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 [ 12.696355] qlcnic 0000:03:00.0: setting latency timer to 64 [ 12.697214] qlcnic 0000:03:00.0: 2MB memory map [ 12.706141] Error: Driver 'pcspkr' is already registered, aborting... [ 12.724504] ses 0:0:32:0: Attached Enclosure device [ 12.753170] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 12.753758] scsi1 : ata_piix [ 12.753916] scsi2 : ata_piix [ 12.754013] ata1: SATA max UDMA/133 cmd 0xece0 ctl 0xecf8 bmdma 0xecb0 irq 17 [ 12.754021] ata2: SATA max UDMA/133 cmd 0xece8 ctl 0xecfc bmdma 0xecb8 irq 17 [ 12.754076] xen: registering gsi 19 triggering 0 polarity 1 [ 12.754089] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 12.754093] xen: --> pirq=19 -> irq=19 (gsi=19) [ 12.754097] Already setup the GSI :19 [ 12.754102] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 12.754203] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 12.754211] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 12.754260] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 12.754342] ehci_hcd 0000:00:1a.7: debug port 1 [ 12.758246] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 12.758338] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdffff800 [ 12.773129] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 12.773166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.773170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.773174] usb usb1: Product: EHCI Host Controller [ 12.773178] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd [ 12.773181] usb usb1: SerialNumber: 0000:00:1a.7 [ 12.773367] hub 1-0:1.0: USB hub found [ 12.773374] hub 1-0:1.0: 4 ports detected [ 12.773531] xen: registering gsi 21 triggering 0 polarity 1 [ 12.773539] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 12.773542] xen: --> pirq=21 -> irq=21 (gsi=21) [ 12.773545] Already setup the GSI :21 [ 12.773550] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 12.773637] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 12.773644] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 12.773658] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 12.773735] ehci_hcd 0000:00:1d.7: debug port 1 [ 12.777625] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 12.777699] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdffffc00 [ 12.793120] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 12.793153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.793158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.793162] usb usb2: Product: EHCI Host Controller [ 12.793165] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd [ 12.793169] usb usb2: SerialNumber: 0000:00:1d.7 [ 12.793349] hub 2-0:1.0: USB hub found [ 12.793356] hub 2-0:1.0: 6 ports detected [ 12.794027] EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1': DEV 0000:fe:03.0 [ 12.794072] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED) [ 12.794706] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0 [ 12.794734] EDAC PCI1: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED) [ 12.795151] EDAC i7core: Driver loaded, 2 memory controller(s) found. [ 12.841807] uhci_hcd: USB Universal Host Controller Interface driver [ 12.841908] xen: registering gsi 17 triggering 0 polarity 1 [ 12.841917] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 12.841920] xen: --> pirq=17 -> irq=17 (gsi=17) [ 12.841923] Already setup the GSI :17 [ 12.841928] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 12.841945] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 12.841952] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 12.841966] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 12.842013] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000e8c0 [ 12.842096] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.842101] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.842105] usb usb3: Product: UHCI Host Controller [ 12.842108] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd [ 12.842112] usb usb3: SerialNumber: 0000:00:1a.0 [ 12.842318] hub 3-0:1.0: USB hub found [ 12.842330] hub 3-0:1.0: 2 ports detected [ 12.842497] xen: registering gsi 18 triggering 0 polarity 1 [ 12.842505] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 12.842510] xen: --> pirq=18 -> irq=18 (gsi=18) [ 12.842513] Already setup the GSI :18 [ 12.842518] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 12.842534] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 12.842540] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 12.842552] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 12.842666] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e8e0 [ 12.842753] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.842757] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.842761] usb usb4: Product: UHCI Host Controller [ 12.842765] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd [ 12.842768] usb usb4: SerialNumber: 0000:00:1a.1 [ 12.842946] hub 4-0:1.0: USB hub found [ 12.842957] hub 4-0:1.0: 2 ports detected [ 12.843105] xen: registering gsi 21 triggering 0 polarity 1 [ 12.843113] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 12.843116] xen: --> pirq=21 -> irq=21 (gsi=21) [ 12.843119] Already setup the GSI :21 [ 12.843124] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 12.843138] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 12.843145] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.843156] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 12.843197] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec00 [ 12.843282] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.843287] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.843291] usb usb5: Product: UHCI Host Controller [ 12.843294] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd [ 12.843298] usb usb5: SerialNumber: 0000:00:1d.0 [ 12.843479] hub 5-0:1.0: USB hub found [ 12.843488] hub 5-0:1.0: 2 ports detected [ 12.843645] xen: registering gsi 20 triggering 0 polarity 1 [ 12.843653] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 12.843657] xen: --> pirq=20 -> irq=20 (gsi=20) [ 12.843660] Already setup the GSI :20 [ 12.843664] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 12.843679] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 12.843685] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.843698] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 12.843804] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ec20 [ 12.843895] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.843902] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.843906] usb usb6: Product: UHCI Host Controller [ 12.843911] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd [ 12.843916] usb usb6: SerialNumber: 0000:00:1d.1 [ 12.844107] hub 6-0:1.0: USB hub found [ 12.844116] hub 6-0:1.0: 2 ports detected [ 12.844281] xen: registering gsi 21 triggering 0 polarity 1 [ 12.844289] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 12.844293] xen: --> pirq=21 -> irq=21 (gsi=21) [ 12.844296] Already setup the GSI :21 [ 12.844300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 12.844317] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 12.844324] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.844336] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 12.844378] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ec40 [ 12.844483] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.844487] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.844491] usb usb7: Product: UHCI Host Controller [ 12.844495] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd [ 12.844498] usb usb7: SerialNumber: 0000:00:1d.2 [ 12.844677] hub 7-0:1.0: USB hub found [ 12.844685] hub 7-0:1.0: 2 ports detected [ 13.077174] ata1: SATA link down (SStatus 0 SControl 300) [ 13.077266] ata2: SATA link down (SStatus 0 SControl 300) [ 13.221115] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 13.345114] qlcnic 0000:03:00.0: phy port: 0 switch_mode: 0, [ 13.345116] max_tx_q: 1 max_rx_q: 8 min_tx_bw: 0x0, [ 13.345117] max_tx_bw: 0x64 max_mtu:0x2580, capabilities: 0x6affae [ 13.361103] qlcnic 0000:03:00.0: failed card response code:0x10 [ 13.361162] qlcnic 0000:03:00.0: Can't get template size 16 [ 13.361167] qlcnic 0000:03:00.0: firmware v4.7.83 [ 13.371640] usb 2-3: New USB device found, idVendor=046b, idProduct=ff90 [ 13.371646] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.371650] usb 2-3: Product: Composite Device [ 13.371653] usb 2-3: Manufacturer: American Megatrends Inc. [ 13.371657] usb 2-3: SerialNumber: serial [ 13.393138] qlcnic: 24:b6:fd:64:1e:45: QME8242-k 10GbE Dual Port Mezzanine Card Board Chip rev 0x54 [ 13.393460] usbcore: registered new interface driver uas [ 13.393559] qlcnic 0000:03:00.0: using msi-x interrupts [ 13.394251] qlcnic 0000:03:00.0: eth0: XGbE port initialized [ 13.394290] xen: registering gsi 38 triggering 0 polarity 1 [ 13.394304] xen_map_pirq_gsi: returning irq 38 for gsi 38 [ 13.394308] xen: --> pirq=38 -> irq=38 (gsi=38) [ 13.394311] Already setup the GSI :38 [ 13.394316] qlcnic 0000:03:00.1: PCI INT A -> GSI 38 (level, low) -> IRQ 38 [ 13.394331] qlcnic 0000:03:00.1: setting latency timer to 64 [ 13.395317] qlcnic 0000:03:00.1: 2MB memory map [ 13.404052] Initializing USB Mass Storage driver... [ 13.404264] scsi3 : usb-storage 2-3:1.0 [ 13.404487] scsi4 : usb-storage 2-3:1.1 [ 13.404693] scsi5 : usb-storage 2-3:1.2 [ 13.404799] usbcore: registered new interface driver usb-storage [ 13.404802] USB Mass Storage support registered. [ 13.409136] qlcnic 0000:03:00.1: phy port: 1 switch_mode: 0, [ 13.409138] max_tx_q: 1 max_rx_q: 8 min_tx_bw: 0x0, [ 13.409139] max_tx_bw: 0x64 max_mtu:0x2580, capabilities: 0x6affae [ 13.425118] qlcnic 0000:03:00.1: failed card response code:0x10 [ 13.425174] qlcnic 0000:03:00.1: Can't get template size 16 [ 13.425178] qlcnic 0000:03:00.1: firmware v4.7.83 [ 13.449525] qlcnic 0000:03:00.1: using msi-x interrupts [ 13.450132] qlcnic 0000:03:00.1: eth1: XGbE port initialized [ 13.677120] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 13.840290] usb 5-2: New USB device found, idVendor=046b, idProduct=ff10 [ 13.840296] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.840300] usb 5-2: Product: Virtual Keyboard and Mouse [ 13.840304] usb 5-2: Manufacturer: American Megatrends Inc. [ 13.840307] usb 5-2: SerialNumber: serial [ 13.905626] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2 [ 13.905800] generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-2/input0 [ 13.912572] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input3 [ 13.912816] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-2/input1 [ 13.912843] usbcore: registered new interface driver usbhid [ 13.912846] usbhid: USB HID core driver [ 14.085125] usb 6-2: new low-speed USB device number 2 using uhci_hcd [ 14.262910] usb 6-2: New USB device found, idVendor=0624, idProduct=de11 [ 14.262915] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.262919] usb 6-2: Product: Avocent KVM [ 14.262923] usb 6-2: Manufacturer: Avocent [ 14.298214] input: Avocent Avocent KVM as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input4 [ 14.298395] generic-usb 0003:0624:DE11.0003: input,hidraw2: USB HID v1.10 Keyboard [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input0 [ 14.307733] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k [ 14.319436] EXT4-fs (sda1): re-mounted. Opts: (null) [ 14.328276] input: Avocent Avocent KVM as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input5 [ 14.328523] generic-usb 0003:0624:DE11.0004: input,hidraw3: USB HID v1.10 Mouse [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input1 [ 14.445936] scsi 3:0:0:0: Direct-Access iDRAC LCDRIVE 1.00 PQ: 0 ANSI: 0 CCS [ 14.449814] scsi 4:0:0:0: CD-ROM iDRAC Virtual CDROM 1.00 PQ: 0 ANSI: 0 CCS [ 14.450813] scsi 5:0:0:0: Direct-Access iDRAC Virtual Floppy 1.00 PQ: 0 ANSI: 0 CCS [ 14.460804] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 14.462790] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 14.557541] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.562159] sr0: scsi-1 drive [ 14.562164] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 14.562421] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 14.642111] Event-channel device installed. [ 14.805454] loop: module loaded [ 15.261328] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 16.987146] openvswitch_mod: Open vSwitch switching datapath 1.4.0, built Mar 6 2012 12:16:33 [ 18.325633] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.434036] device xenbr0 entered promiscuous mode [ 18.445825] device eth1 entered promiscuous mode [ 18.446092] device eth0 entered promiscuous mode [ 18.457027] device vlan100 entered promiscuous mode [ 18.484409] device vlan900 entered promiscuous mode [ 18.508746] device vlan500 entered promiscuous mode [ 18.629208] qlcnic 0000:03:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100406) [ 19.374883] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.481194] qlcnic 0000:03:00.1: restoring config space at offset 0x1 (was 0x100400, writing 0x100406) [ 20.382891] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 20.688307] RPC: Registered named UNIX socket transport module. [ 20.688312] RPC: Registered udp transport module. [ 20.688315] RPC: Registered tcp transport module. [ 20.688318] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 20.715885] FS-Cache: Loaded [ 20.741906] FS-Cache: Netfs 'nfs' registered for caching [ 20.755536] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). -- View this message in context: http://xen.1045712.n5.nabble.com/no-carrier-on-qlogic-8242-10gig-with-linux-3-x-running-xen-tp5597283p5597400.html Sent from the Xen - Dev mailing list archive at Nabble.com. _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |