|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Freeze with 2.6.32.19 and xen-4.0.1rc5, acpi problems
I checked out these options, following result >>> - acpi=ht noapic => worked >>> - noapic => didn't work, disk errors while booting, no >>> functional system >>> - acpi=ht apic=debug => worked >>> >>> So it seems i definitly need the option acpi=ht or acpi=off or something >>> like that. >>> >> Keir, Jeremy: Any idea why acpi=ht is needed to make Intel DQ45CB (Q45 >> chipset) work? >> >> Without "acpi=ht" the system freezes randomly without any >> log/debug/serialconsole output.. > At a random guess, there's something strange about the SCI interrupt. > When booting native, does "acpi" get irq 9 or something else? Is there > a BIOS setting relating to SCI or ACPI interrupts? > The kernel was running native without that problems, i attached dmesg. I didn't find any BIOS options like that. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.19 (root@jupiter) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Mon Aug 16 15:43:54 CEST 2010 [ 0.000000] Command line: root=/dev/md0 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cbb77000 (usable) [ 0.000000] BIOS-e820: 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbbfa000 - 00000000cbd28000 (reserved) [ 0.000000] BIOS-e820: 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbd3c000 - 00000000cbe43000 (reserved) [ 0.000000] BIOS-e820: 00000000cbe43000 - 00000000cbe4b000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbe66000 - 00000000cbe88000 (reserved) [ 0.000000] BIOS-e820: 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cbe8e000 - 00000000cc000000 (usable) [ 0.000000] BIOS-e820: 00000000cdc00000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x22c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0CC000000 mask FFC000000 uncachable [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 22C000000 mask FFC000000 uncachable [ 0.000000] 6 base 230000000 mask FF0000000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cc000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcc000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cc000000 [ 0.000000] 0000000000 - 00cc000000 page 2M [ 0.000000] kernel direct mapping tables up to cc000000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-000000022c000000 [ 0.000000] 0100000000 - 022c000000 page 2M [ 0.000000] kernel direct mapping tables up to 22c000000 @ b000-15000 [ 0.000000] RAMDISK: 3779a000 - 37fefed1 [ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000cbe49e18 00064 (v01 INTEL DQ45CB 0000007B MSFT 00010013) [ 0.000000] ACPI: FACP 00000000cbe48d98 000F4 (v04 INTEL A M I 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - CBE4CF40/00000000CBE51F40, using 32 (20090903/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000cbe43018 04B53 (v01 INTEL DQ45CB 0000007B INTL 20051117) [ 0.000000] ACPI: FACS 00000000cbe4cf40 00040 [ 0.000000] ACPI: APIC 00000000cbe48f18 0006C (v02 INTEL DQ45CB 0000007B MSFT 00010013) [ 0.000000] ACPI: MCFG 00000000cbe53e18 0003C (v01 INTEL DQ45CB 0000007B MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000cbe52d18 000A0 (v32 INTEL DQ45CB 0000007B TFSM 000F4240) [ 0.000000] ACPI: HPET 00000000cbe53d98 00038 (v01 INTEL DQ45CB 0000007B AMI. 00000003) [ 0.000000] ACPI: SPCR 00000000cbe53d18 00050 (v01 INTEL DQ45CB 0000007B AMI. 00000003) [ 0.000000] ACPI: TCPA 00000000cbe53c98 00032 (v02 INTEL DQ45CB 0000007B MSFT 01000013) [ 0.000000] ACPI: DMAR 00000000cbbf9d98 00108 (v01 INTEL DQ45CB 0000007B INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000022c000000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000022c000000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000005d7ff] pages 46 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 022c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001680514] TEXT DATA BSS ==> [0001000000 - 0001680514] [ 0.000000] #3 [003779a000 - 0037fefed1] RAMDISK ==> [003779a000 - 0037fefed1] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [0001681000 - 00016811a8] BRK ==> [0001681000 - 00016811a8] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000] [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0022c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cbb77 [ 0.000000] 0: 0x000cbe8e -> 0x000cc000 [ 0.000000] 0: 0x00100000 -> 0x0022c000 [ 0.000000] On node 0 totalpages: 2063495 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 108 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 816417 pages, LIFO batch:31 [ 0.000000] Normal zone: 16800 pages used for memmap [ 0.000000] Normal zone: 1212000 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cbb77000 - 00000000cbbfa000 [ 0.000000] PM: Registered nosave memory: 00000000cbbfa000 - 00000000cbd28000 [ 0.000000] PM: Registered nosave memory: 00000000cbd28000 - 00000000cbd3c000 [ 0.000000] PM: Registered nosave memory: 00000000cbd3c000 - 00000000cbe43000 [ 0.000000] PM: Registered nosave memory: 00000000cbe43000 - 00000000cbe4b000 [ 0.000000] PM: Registered nosave memory: 00000000cbe4b000 - 00000000cbe66000 [ 0.000000] PM: Registered nosave memory: 00000000cbe66000 - 00000000cbe88000 [ 0.000000] PM: Registered nosave memory: 00000000cbe88000 - 00000000cbe8e000 [ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000cdc00000 [ 0.000000] PM: Registered nosave memory: 00000000cdc00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880008c00000 s90008 r8192 d20584 u524288 [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032251 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/md0 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8055172k/9109504k available (3115k kernel code, 855524k absent, 198808k reserved, 1859k data, 592k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 25 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 26 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 27 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2933.058 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.11 BogoMIPS (lpj=11732232) [ 0.004021] Security Framework initialized [ 0.004026] SELinux: Disabled at boot. [ 0.004492] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010819] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012409] Mount-cache hash table entries: 256 [ 0.012534] Initializing cgroup subsys ns [ 0.012538] Initializing cgroup subsys cpuacct [ 0.012540] Initializing cgroup subsys devices [ 0.012542] Initializing cgroup subsys freezer [ 0.012543] Initializing cgroup subsys net_cls [ 0.012562] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012563] CPU: L2 cache: 2048K [ 0.012566] CPU 0/0x0 -> Node 0 [ 0.012568] CPU: Physical Processor ID: 0 [ 0.012569] CPU: Processor Core ID: 0 [ 0.012571] mce: CPU supports 6 MCE banks [ 0.012577] CPU0: Thermal monitoring enabled (TM2) [ 0.012580] using mwait in idle threads. [ 0.012582] Performance Events: Core2 events, Intel PMU driver. [ 0.012586] ... version: 2 [ 0.012587] ... bit width: 40 [ 0.012588] ... generic registers: 2 [ 0.012589] ... value mask: 000000ffffffffff [ 0.012591] ... max period: 000000007fffffff [ 0.012592] ... fixed-purpose events: 3 [ 0.012593] ... event mask: 0000000700000003 [ 0.013398] ACPI: Core revision 20090903 [ 0.020038] DMAR: Host address width 36 [ 0.020040] DMAR: DRHD base: 0x000000fed91000 flags: 0x0 [ 0.020045] IOMMU fed91000: ver 1:0 cap c0000020630272 ecap 1000 [ 0.020047] DMAR: DRHD base: 0x000000fed92000 flags: 0x0 [ 0.020052] IOMMU fed92000: ver 1:0 cap c0000020630272 ecap 1000 [ 0.020054] DMAR: DRHD base: 0x000000fed93000 flags: 0x1 [ 0.020057] IOMMU fed93000: ver 1:0 cap c9008020630272 ecap 1000 [ 0.020059] DMAR: RMRR base: 0x000000cbe27000 end: 0x000000cbe3bfff [ 0.020062] DMAR: RMRR base: 0x000000cdc00000 end: 0x000000cfffffff [ 0.020063] DMAR: No ATSR found [ 0.020071] Setting APIC routing to flat [ 0.020392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060076] CPU0: Intel Pentium(R) Dual-Core CPU E6500 @ 2.93GHz stepping 0a [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU 1/0x1 -> Node 0 [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.148055] CPU1: Intel Pentium(R) Dual-Core CPU E6500 @ 2.93GHz stepping 0a [ 0.148061] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.152015] Brought up 2 CPUs [ 0.152017] Total of 2 processors activated (11732.86 BogoMIPS). [ 0.152402] CPU0 attaching sched-domain: [ 0.152405] domain 0: span 0-1 level MC [ 0.152407] groups: 0 1 [ 0.152412] CPU1 attaching sched-domain: [ 0.152413] domain 0: span 0-1 level MC [ 0.152414] groups: 1 0 [ 0.152482] devtmpfs: initialized [ 0.154350] regulator: core version 0.5 [ 0.154350] NET: Registered protocol family 16 [ 0.154350] ACPI: bus type pci registered [ 0.154350] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.154350] PCI: Not using MMCONFIG. [ 0.154350] PCI: Using configuration type 1 for base access [ 0.154350] bio: create slab <bio-0> at 0 [ 0.156151] ACPI: EC: Look up EC in DSDT [ 0.157316] ACPI: Executed 1 blocks of module-level executable AML code [ 0.159726] ACPI: BIOS _OSI(Linux) query ignored [ 0.161138] ACPI: Interpreter enabled [ 0.161140] ACPI: (supports S0 S3 S4 S5) [ 0.161154] ACPI: Using IOAPIC for interrupt routing [ 0.161253] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.161308] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 0.165761] PCI: Using MMCONFIG at f0000000 - f7ffffff [ 0.170381] ACPI: No dock devices found. [ 0.170564] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.170626] pci 0000:00:02.0: reg 10 64bit mmio: [0xe0000000-0xe03fffff] [ 0.170631] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.170634] pci 0000:00:02.0: reg 20 io port: [0xf220-0xf227] [ 0.170658] pci 0000:00:02.1: reg 10 64bit mmio: [0xe0400000-0xe04fffff] [ 0.170713] pci 0000:00:03.0: reg 10 64bit mmio: [0xe0525000-0xe052500f] [ 0.170761] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.170765] pci 0000:00:03.0: PME# disabled [ 0.170789] pci 0000:00:03.2: reg 10 io port: [0xf210-0xf217] [ 0.170792] pci 0000:00:03.2: reg 14 io port: [0xf200-0xf203] [ 0.170796] pci 0000:00:03.2: reg 18 io port: [0xf1f0-0xf1f7] [ 0.170799] pci 0000:00:03.2: reg 1c io port: [0xf1e0-0xf1e3] [ 0.170802] pci 0000:00:03.2: reg 20 io port: [0xf1d0-0xf1df] [ 0.170844] pci 0000:00:03.3: reg 10 io port: [0xf1c0-0xf1c7] [ 0.170848] pci 0000:00:03.3: reg 14 32bit mmio: [0xe0524000-0xe0524fff] [ 0.170923] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0500000-0xe051ffff] [ 0.170928] pci 0000:00:19.0: reg 14 32bit mmio: [0xe0523000-0xe0523fff] [ 0.170933] pci 0000:00:19.0: reg 18 io port: [0xf0e0-0xf0ff] [ 0.170964] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.170967] pci 0000:00:19.0: PME# disabled [ 0.171008] pci 0000:00:1a.0: reg 20 io port: [0xf0c0-0xf0df] [ 0.171064] pci 0000:00:1a.1: reg 20 io port: [0xf0a0-0xf0bf] [ 0.171122] pci 0000:00:1a.2: reg 20 io port: [0xf080-0xf09f] [ 0.171182] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0522000-0xe05223ff] [ 0.171227] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.171231] pci 0000:00:1a.7: PME# disabled [ 0.171275] pci 0000:00:1d.0: reg 20 io port: [0xf060-0xf07f] [ 0.171332] pci 0000:00:1d.1: reg 20 io port: [0xf040-0xf05f] [ 0.171390] pci 0000:00:1d.2: reg 20 io port: [0xf020-0xf03f] [ 0.171451] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0521000-0xe05213ff] [ 0.171496] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.171500] pci 0000:00:1d.7: PME# disabled [ 0.171643] pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7] [ 0.171648] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3] [ 0.171652] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197] [ 0.171657] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183] [ 0.171661] pci 0000:00:1f.2: reg 20 io port: [0xf170-0xf17f] [ 0.171665] pci 0000:00:1f.2: reg 24 io port: [0xf160-0xf16f] [ 0.171703] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe0520000-0xe05200ff] [ 0.171714] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 0.171750] pci 0000:00:1f.5: reg 10 io port: [0xf150-0xf157] [ 0.171754] pci 0000:00:1f.5: reg 14 io port: [0xf140-0xf143] [ 0.171758] pci 0000:00:1f.5: reg 18 io port: [0xf130-0xf137] [ 0.171763] pci 0000:00:1f.5: reg 1c io port: [0xf120-0xf123] [ 0.171767] pci 0000:00:1f.5: reg 20 io port: [0xf110-0xf11f] [ 0.171772] pci 0000:00:1f.5: reg 24 io port: [0xf100-0xf10f] [ 0.171835] pci 0000:00:1e.0: transparent bridge [ 0.171848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.171953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.178034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.178107] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.178180] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.178251] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.178324] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.178396] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.178469] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.178541] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.178621] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.178629] vgaarb: loaded [ 0.178651] PCI: Using ACPI for IRQ routing [ 0.178651] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0 [ 0.178651] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.184018] hpet: hpet2 irq 24 for MSI [ 0.184023] hpet: hpet3 irq 25 for MSI [ 0.184032] Switching to clocksource tsc [ 0.184910] pnp: PnP ACPI init [ 0.184917] ACPI: bus type pnp registered [ 0.186635] pnp: PnP ACPI: found 11 devices [ 0.186637] ACPI: ACPI bus type pnp unregistered [ 0.186644] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.186646] system 00:01: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.186648] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved [ 0.186652] system 00:02: ioport range 0xa20-0xa3f has been reserved [ 0.186654] system 00:02: ioport range 0xa00-0xa1f has been reserved [ 0.186656] system 00:02: ioport range 0xb78-0xb7f has been reserved [ 0.186658] system 00:02: ioport range 0xf78-0xf7f has been reserved [ 0.186662] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.186666] system 00:09: ioport range 0x400-0x47f has been reserved [ 0.186668] system 00:09: ioport range 0x1180-0x119f has been reserved [ 0.186670] system 00:09: ioport range 0x500-0x57f has been reserved [ 0.186672] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.186674] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.186676] system 00:09: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.186678] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.186680] system 00:09: iomem range 0xfed45000-0xfed9ffff has been reserved [ 0.186682] system 00:09: iomem range 0xff000000-0xffffffff has been reserved [ 0.191380] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.191381] pci 0000:00:1e.0: IO window: disabled [ 0.191385] pci 0000:00:1e.0: MEM window: disabled [ 0.191388] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.191397] pci 0000:00:1e.0: setting latency timer to 64 [ 0.191400] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.191402] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.191404] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.191406] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.191429] NET: Registered protocol family 2 [ 0.191604] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.192783] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.195906] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.196317] TCP: Hash tables configured (established 524288 bind 65536) [ 0.196320] TCP reno registered [ 0.196426] NET: Registered protocol family 1 [ 0.196449] pci 0000:00:02.0: Boot video device [ 1.796014] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.396014] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.396188] Unpacking initramfs... [ 3.535334] Freeing initrd memory: 8535k freed [ 3.538245] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.538250] DMA: Placing 64MB software IO TLB between ffff880008d9d000 - ffff88000cd9d000 [ 3.538251] DMA: software IO TLB at phys 0x8d9d000 - 0xcd9d000 [ 3.538560] audit: initializing netlink socket (disabled) [ 3.538571] type=2000 audit(1282670447.536:1): initialized [ 3.539129] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.540167] VFS: Disk quotas dquot_6.5.2 [ 3.540206] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.540266] msgmni has been set to 15749 [ 3.540397] alg: No test for stdrng (krng) [ 3.540431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.540434] io scheduler noop registered [ 3.540435] io scheduler anticipatory registered [ 3.540437] io scheduler deadline registered [ 3.540458] io scheduler cfq registered (default) [ 3.541519] Linux agpgart interface v0.103 [ 3.541532] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset [ 3.542076] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 3.558107] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 3.558143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.558236] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.558460] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.558547] alloc irq_desc for 17 on node -1 [ 3.558549] alloc kstat_irqs on node -1 [ 3.558555] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.558602] 0000:00:03.3: ttyS1 at I/O 0xf1c0 (irq = 17) is a 16550A [ 3.558666] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 3.558715] PNP: No PS/2 controller found. Probing ports directly. [ 3.563431] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.563435] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.563509] mice: PS/2 mouse device common for all mice [ 3.563548] rtc_cmos 00:05: RTC can wake from S4 [ 3.563577] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.563600] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 3.563608] cpuidle: using governor ladder [ 3.563609] cpuidle: using governor menu [ 3.563612] No iBFT detected. [ 3.563842] TCP cubic registered [ 3.563934] NET: Registered protocol family 10 [ 3.564253] lo: Disabled Privacy Extensions [ 3.564442] Mobile IPv6 [ 3.564444] NET: Registered protocol family 17 [ 3.564500] PM: Resume from disk failed. [ 3.564511] registered taskstats version 1 [ 3.564803] rtc_cmos 00:05: setting system clock to 2010-08-24 17:20:48 UTC (1282670448) [ 3.564838] Initalizing network drop monitor service [ 3.564855] Freeing unused kernel memory: 592k freed [ 3.564961] Write protecting the kernel read-only data: 4252k [ 3.802712] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.802714] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.802758] alloc irq_desc for 20 on node -1 [ 3.802759] alloc kstat_irqs on node -1 [ 3.802767] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.802775] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.802861] alloc irq_desc for 28 on node -1 [ 3.802862] alloc kstat_irqs on node -1 [ 3.802871] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 3.804679] SCSI subsystem initialized [ 3.814913] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to SOL/IDER session. [ 3.820476] usbcore: registered new interface driver usbfs [ 3.820496] usbcore: registered new interface driver hub [ 3.836056] usbcore: registered new device driver usb [ 3.931299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.932424] uhci_hcd: USB Universal Host Controller Interface driver [ 3.932688] libata version 3.00 loaded. [ 4.207590] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:7e:5d:23 [ 4.207592] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.207646] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff [ 4.207679] alloc irq_desc for 18 on node -1 [ 4.207680] alloc kstat_irqs on node -1 [ 4.207686] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.207716] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.207719] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.207735] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.207760] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.211657] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.211673] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0522000 [ 4.224017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.224043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.224047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.224049] usb usb1: Product: EHCI Host Controller [ 4.224052] usb usb1: Manufacturer: Linux 2.6.32.19 ehci_hcd [ 4.224054] usb usb1: SerialNumber: 0000:00:1a.7 [ 4.224146] usb usb1: configuration #1 chosen from 1 choice [ 4.224182] hub 1-0:1.0: USB hub found [ 4.224190] hub 1-0:1.0: 6 ports detected [ 4.224248] alloc irq_desc for 16 on node -1 [ 4.224249] alloc kstat_irqs on node -1 [ 4.224253] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.224260] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.224262] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.224269] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 4.224297] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 4.224323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.224324] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.224326] usb usb2: Product: UHCI Host Controller [ 4.224327] usb usb2: Manufacturer: Linux 2.6.32.19 uhci_hcd [ 4.224328] usb usb2: SerialNumber: 0000:00:1a.0 [ 4.224367] usb usb2: configuration #1 chosen from 1 choice [ 4.224386] hub 2-0:1.0: USB hub found [ 4.224391] hub 2-0:1.0: 2 ports detected [ 4.224444] alloc irq_desc for 23 on node -1 [ 4.224446] alloc kstat_irqs on node -1 [ 4.224449] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.224468] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.224470] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.224476] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 4.224499] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.228383] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 4.228392] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0521000 [ 4.244011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.244029] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.244032] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.244035] usb usb3: Product: EHCI Host Controller [ 4.244037] usb usb3: Manufacturer: Linux 2.6.32.19 ehci_hcd [ 4.244040] usb usb3: SerialNumber: 0000:00:1d.7 [ 4.244114] usb usb3: configuration #1 chosen from 1 choice [ 4.244147] hub 3-0:1.0: USB hub found [ 4.244154] hub 3-0:1.0: 6 ports detected [ 4.244214] alloc irq_desc for 21 on node -1 [ 4.244216] alloc kstat_irqs on node -1 [ 4.244219] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.244224] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.244226] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.244232] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.244258] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0 [ 4.244283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.244284] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.244286] usb usb4: Product: UHCI Host Controller [ 4.244287] usb usb4: Manufacturer: Linux 2.6.32.19 uhci_hcd [ 4.244288] usb usb4: SerialNumber: 0000:00:1a.1 [ 4.244326] usb usb4: configuration #1 chosen from 1 choice [ 4.244344] hub 4-0:1.0: USB hub found [ 4.244348] hub 4-0:1.0: 2 ports detected [ 4.244390] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.244394] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4.244396] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.244401] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.244421] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080 [ 4.244445] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.244446] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.244448] usb usb5: Product: UHCI Host Controller [ 4.244449] usb usb5: Manufacturer: Linux 2.6.32.19 uhci_hcd [ 4.244450] usb usb5: SerialNumber: 0000:00:1a.2 [ 4.244488] usb usb5: configuration #1 chosen from 1 choice [ 4.244505] hub 5-0:1.0: USB hub found [ 4.244509] hub 5-0:1.0: 2 ports detected [ 4.247169] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.247177] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.247179] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.247188] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.247212] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060 [ 4.247243] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.247245] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.247246] usb usb6: Product: UHCI Host Controller [ 4.247248] usb usb6: Manufacturer: Linux 2.6.32.19 uhci_hcd [ 4.247249] usb usb6: SerialNumber: 0000:00:1d.0 [ 4.247298] usb usb6: configuration #1 chosen from 1 choice [ 4.247319] hub 6-0:1.0: USB hub found [ 4.247324] hub 6-0:1.0: 2 ports detected [ 4.247360] ata_piix 0000:00:1f.2: version 2.13 [ 4.247372] alloc irq_desc for 19 on node -1 [ 4.247374] alloc kstat_irqs on node -1 [ 4.247379] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.247383] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 4.247425] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 4.248110] scsi0 : ata_piix [ 4.248622] scsi1 : ata_piix [ 4.248664] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma 0xf170 irq 19 [ 4.248668] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma 0xf178 irq 19 [ 4.248693] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.248700] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.248703] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.248712] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.248736] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040 [ 4.248774] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.248775] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.248777] usb usb7: Product: UHCI Host Controller [ 4.248778] usb usb7: Manufacturer: Linux 2.6.32.19 uhci_hcd [ 4.248780] usb usb7: SerialNumber: 0000:00:1d.1 [ 4.248835] usb usb7: configuration #1 chosen from 1 choice [ 4.248858] hub 7-0:1.0: USB hub found [ 4.248863] hub 7-0:1.0: 2 ports detected [ 4.248918] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.248922] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 4.248958] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 4.249021] scsi2 : ata_piix [ 4.249264] scsi3 : ata_piix [ 4.249295] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 19 [ 4.249299] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 19 [ 4.249327] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.249332] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.249334] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.249341] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.249366] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020 [ 4.249394] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.249396] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.249397] usb usb8: Product: UHCI Host Controller [ 4.249399] usb usb8: Manufacturer: Linux 2.6.32.19 uhci_hcd [ 4.249400] usb usb8: SerialNumber: 0000:00:1d.2 [ 4.249444] usb usb8: configuration #1 chosen from 1 choice [ 4.249464] hub 8-0:1.0: USB hub found [ 4.249469] hub 8-0:1.0: 2 ports detected [ 4.578805] ata3: SATA link down (SStatus 0 SControl 300) [ 4.589584] ata4: SATA link down (SStatus 0 SControl 300) [ 5.044065] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.044077] ata1.01: SATA link down (SStatus 0 SControl 300) [ 5.052865] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133 [ 5.052869] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.064064] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.064076] ata2.01: SATA link down (SStatus 0 SControl 300) [ 5.068818] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133 [ 5.068821] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.068962] ata1.00: configured for UDMA/133 [ 5.069050] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5 [ 5.076865] ata2.00: configured for UDMA/133 [ 5.076947] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5 [ 5.110530] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.110561] sd 0:0:0:0: [sda] Write Protect is off [ 5.110563] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.110578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.110668] sda: [ 5.110904] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.110932] sd 1:0:0:0: [sdb] Write Protect is off [ 5.110934] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.110949] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.111024] sdb: sdb1 sdb2 sdb3 [ 5.121767] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.136586] sda1 sda2 sda3 [ 5.136797] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.364591] md: raid1 personality registered for level 1 [ 5.368527] md: md0 stopped. [ 5.433357] md: bind<sdb1> [ 5.433535] md: bind<sda1> [ 5.439319] raid1: raid set md0 active with 2 out of 2 mirrors [ 5.439335] md0: detected capacity change from 0 to 1998585856 [ 5.439560] md: md1 stopped. [ 5.439616] md0: unknown partition table [ 5.474508] md: bind<sdb2> [ 5.474684] md: bind<sda2> [ 5.480568] raid1: raid set md1 active with 2 out of 2 mirrors [ 5.480584] md1: detected capacity change from 0 to 17190748160 [ 5.480783] md: md2 stopped. [ 5.480838] md1: unknown partition table [ 5.505766] md: bind<sdb3> [ 5.505944] md: bind<sda3> [ 5.511814] raid1: raid set md2 active with 2 out of 2 mirrors [ 5.511831] md2: detected capacity change from 0 to 981012578304 [ 5.511997] md2: unknown partition table [ 5.640575] device-mapper: uevent: version 1.0.3 [ 5.640671] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 5.696970] kjournald starting. Commit interval 5 seconds [ 5.696977] EXT3-fs: mounted filesystem with ordered data mode. [ 6.328140] udevd version 125 started [ 6.640862] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 6.910370] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.047400] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 7.047409] ACPI: Sleep Button [SLPB] [ 7.047444] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 7.047449] ACPI: Power Button [PWRB] [ 7.047482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 7.047484] ACPI: Power Button [PWRF] [ 7.053221] Error: Driver 'pcspkr' is already registered, aborting... [ 7.060596] ACPI: SSDT 00000000cbe4cc18 002CC (v01 AMI IST 00000001 MSFT 03000001) [ 7.061008] Marking TSC unstable due to TSC halts in idle [ 7.061079] processor LNXCPU:00: registered as cooling_device0 [ 7.061420] processor LNXCPU:01: registered as cooling_device1 [ 7.128017] Switching to clocksource hpet [ 9.388921] EXT3 FS on md0, internal journal [ 10.222278] loop: module loaded [ 11.551853] kjournald starting. Commit interval 5 seconds [ 11.552251] EXT3 FS on md1, internal journal [ 11.552257] EXT3-fs: mounted filesystem with ordered data mode. [ 11.610679] kjournald starting. Commit interval 5 seconds [ 11.610700] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [ 11.663177] EXT3 FS on dm-25, internal journal [ 11.663179] EXT3-fs: mounted filesystem with ordered data mode. [ 11.736152] Adding 2097144k swap on /dev/mapper/vgrp1-orion.swap. Priority:-1 extents:1 across:2097144k [ 12.383288] Bridge firewalling registered [ 12.462079] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx> [ 12.462081] All bugs added by David S. Miller <davem@xxxxxxxxxx> [ 12.500820] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 12.556208] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 12.557125] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.559244] device eth0.100 entered promiscuous mode [ 12.559934] device eth0 entered promiscuous mode [ 12.561076] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.562004] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.565799] xenbr100: port 1(eth0.100) entering learning state [ 21.564175] xenbr100: port 1(eth0.100) entering forwarding state [ 21.673428] device eth0.200 entered promiscuous mode [ 21.681420] xenbr200: port 1(eth0.200) entering learning state [ 22.880174] xenbr100: no IPv6 routers present [ 23.368171] eth0: no IPv6 routers present [ 23.424174] eth0.100: no IPv6 routers present [ 30.680176] xenbr200: port 1(eth0.200) entering forwarding state [ 32.196013] xenbr200: no IPv6 routers present [ 32.584513] eth0.200: no IPv6 routers present _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |