[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] dom0 won't boot
Your Grub config shows you're passing: com1=115200 to Xen. I suspect Xen would reject that format and not produce any serial output. You really do need the full: com1=115200,8n1 or it might not work. Unfortunately, having the serial console working in Linux is not quite enough because Xen has control of the serial port and XenLinux has to go through Xen. You should at least be seeing something of Xen output on the serial line even if Linux isn't booting. Thanks for your patience, you should be up and running again soon. HTH, Mark ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |