Re: [Xen-devel] Please help on Xen installation

[Keir Fraser <Keir.Fraser@xxxxxxxxxxxx>]

> Initially it seemed ok.
>   Booting 'Xen (2.4.22)'
> 
> kernel /image.gz dom0_mem=131072 ser_baud=115200 noht
>    [Multiboot-elf, <0x100000:0xce3f0:0x1c430>, shtab=0x1eb258,
> entry=0x100000]
> module /xenolinux.gz root=/dev/sda4 console=tty0
>    [Multiboot-module @ 0x206000, 0x18b8cc bytes]
> 
> Then I can see many strange characters on the screen. Then the machine
> rebooted. Any suggestions?

A few thoughts:

What hardware are you using? The output of 'dmesg' from a working
Linux kernel might be useful.

Does the CD work if you boot from it directly?

Do you have a VGA-compatible video card? Xen assumes you do and things
will not be pretty otherwise.

Do you see random garbage on the monitor, or over the serial line? I
assume the former, in which case you may get useful information out by
reading console output from the first serial port (COM1) --- it will
be 115200 baud, 8 data bits, 1 stop bit, no parity.

I hope this helps --- we really need more info and for you to try some
of the above tests to pin down what the problem might be.

 Regards,
 Keir


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel