|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-bugs] Debian Lenny 5.0.2 -- XEN Hypervisor 3.2.1 ; linux-image-2.6.26-2-xen-amd64 ; Hang under boot
I have an new installed Debian Lenny 5.0.2 (AMD64) install, I use stock debian kernel and Hypervisor; DomO OS: Debian Lenny 5.0.3 Kernel: 2.6.26-2-xen-amd64 Hyper: 3.2.1 PCI-backend: yes Name: master DomU OS: Debian Lenny 5.0.3 Kernel: 2.6.26-2-xen-amd64 Name: webserver The problem is that I wants to pass-throe to NIC's and one ISDN card to DomU. And it works when I passes one NIC and the ISDN card, but when I try to pass the 2x NIC it starts normally, and then suddenly just hang up. With the only message in the console: /sbin/dhclient-script: line 139: 1265 Segmentation fault ifconfig $interface inet 0 up [ 16.013890] eth0: no IPv6 routers present At first the to NIC was from same vendor and batch, so I thought it might had something to do with that, so I changed one of the NIC's to a 3Com 10/100 instead. But it is still same error. #### LOG with to identical NIC's: # xm start webserver -c [ 0.680186] Initializing cgroup subsys ns [ 0.680191] Initializing cgroup subsys cpuacct [ 0.680194] Initializing cgroup subsys devices [ 0.680212] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.680217] CPU: L2 Cache: 512K (64 bytes/line) [ 0.680222] CPU: Physical Processor ID: 0 [ 0.680224] CPU: Processor Core ID: 3 [ 0.680235] SMP alternatives: switching to UP code [ 0.685734] Freeing SMP alternatives: 21k freed [ 0.685825] Brought up 1 CPUs [ 0.688573] net_namespace: 1224 bytes [ 0.688698] NET: Registered protocol family 16 [ 0.689506] Brought up 1 CPUs [ 0.689519] PCI: Fatal: No config space access function found [ 0.689524] PCI: setting up Xen PCI frontend stub [ 0.689925] ACPI: Interpreter disabled. [ 0.689932] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.689953] pnp: PnP ACPI: disabled [ 0.690126] suspend: event channel 7 [ 0.690441] xen_mem: Initialising balloon driver. [ 0.692429] usbcore: registered new interface driver usbfs [ 0.692474] usbcore: registered new interface driver hub [ 0.692510] usbcore: registered new device driver usb [ 0.692628] PCI: System does not support PCI [ 0.692632] PCI: System does not support PCI [ 0.692937] pcifront pci-0: Installing PCI frontend [ 0.693022] pcifront pci-0: Creating PCI Frontend Bus 0000:00 [ 0.704735] NET: Registered protocol family 2 [ 0.740470] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.740631] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.741215] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.741512] TCP: Hash tables configured (established 131072 bind 65536) [ 0.741517] TCP reno registered [ 0.752477] NET: Registered protocol family 1 [ 0.752544] checking if image is initramfs... it is [ 0.765260] Freeing initrd memory: 22036k freed [ 0.771426] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.771642] audit: initializing netlink socket (disabled) [ 0.771654] type=2000 audit(1253380351.924:1): initialized [ 0.771798] VFS: Disk quotas dquot_6.5.1 [ 0.771816] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.771831] msgmni has been set to 2091 [ 0.771889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.771894] io scheduler noop registered [ 0.771897] io scheduler anticipatory registered [ 0.771899] io scheduler deadline registered [ 0.771905] io scheduler cfq registered (default) [ 0.772773] Linux agpgart interface v0.103 [ 0.772802] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.773598] brd: module loaded [ 0.773643] input: Macintosh mouse button emulation as /class/input/input0 [ 0.773687] Xen virtual console successfully installed as hvc0 [ 0.773717] Event-channel device installed. [ 0.779980] netfront: Initialising virtual ethernet driver. [ 0.783113] PNP: No PS/2 controller found. Probing ports directly. [ 0.783929] i8042.c: No controller found. [ 0.784464] xen-vbd: registered block device major 202 [ 0.784475] blkfront: xvda1: barriers enabled [ 0.788666] blkfront: xvda2: barriers enabled [ 0.792074] mice: PS/2 mouse device common for all mice [ 0.792146] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.792217] No iBFT detected. [ 0.792475] TCP cubic registered [ 0.792479] NET: Registered protocol family 17 [ 0.792533] registered taskstats version 1 [ 0.792561] XENBUS: Device with no driver: device/console/0 [ 0.792564] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.792571] Freeing unused kernel memory: 216k freed Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/fan.ko): No such device WARNING: Error inserting processor (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/processor.ko): No such device [ 0.888575] thermal: Unknown symbol acpi_processor_set_thermal_limit FATAL: Error inserting thermal (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ 1.079030] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 1.079221] r8169 0000:00:01.0: enabling device (0000 -> 0003) [ 1.079684] eth1: RTL8169sb/8110sb at 0xffffc20000024800, 00:14:d1:17:6c:74, XID 10000000 IRQ 21 [ 1.080269] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 1.080404] r8169 0000:00:02.0: enabling device (0000 -> 0003) [ 1.080800] eth2: RTL8169sb/8110sb at 0xffffc20000026400, 00:14:d1:17:fb:b8, XID 10000000 IRQ 22 done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Loading[ 1.128810] md: raid1 personality registered for level 1 Success: loaded module raid1. [ 1.132390] xor: automatically using best checksumming function: generic_sse [ 1.152002] generic_sse: 8805.000 MB/sec [ 1.152006] xor: using function: generic_sse (8805.000 MB/sec) [ 1.153152] async_tx: api initialized (async) [ 1.220010] raid6: int64x1 3094 MB/s [ 1.288017] raid6: int64x2 3916 MB/s [ 1.356023] raid6: int64x4 3750 MB/s [ 1.424020] raid6: int64x8 2244 MB/s [ 1.492040] raid6: sse2x1 3862 MB/s [ 1.560042] raid6: sse2x2 5979 MB/s [ 1.628044] raid6: sse2x4 6638 MB/s [ 1.628047] raid6: using algorithm sse2x4 (6638 MB/s) [ 1.628053] md: raid6 personality registered for level 6 [ 1.628056] md: raid5 personality registered for level 5 [ 1.628059] md: raid4 personality registered for level 4 Success: loaded module raid456. done. Begin: Assembling all MD arrays ... [ 1.638999] md: md0 stopped. mdadm: no devices found for /dev/md0 [ 1.642798] md: md1 stopped. mdadm: no devices found for /dev/md1 [ 1.646302] md: md2 stopped. mdadm: no devices found for /dev/md2 [ 1.649940] md: md3 stopped. mdadm: no devices found for /dev/md3 [ 1.653559] md: md4 stopped. mdadm: no devices found for /dev/md4 Failure: failed to assemble all arrays. done. Begin: Waiting for udev to process events ... done. [ 1.674302] device-mapper: uevent: version 1.0.3 [ 1.675094] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx done. Begin: Running /scripts/local-premount ... done. [ 1.716286] kjournald starting. Commit interval 5 seconds [ 1.716296] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd[ 2.809611] udevd version 125 started . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 3.347531] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded [ 3.391419] HiSax: Linux Driver for passive ISDN cards [ 3.391430] HiSax: Version 3.5 (module) [ 3.391433] HiSax: Layer1 Revision 2.46.2.5 [ 3.391436] HiSax: Layer2 Revision 2.30.2.4 [ 3.391438] HiSax: TeiMgr Revision 2.20.2.3 [ 3.391440] HiSax: Layer3 Revision 2.22.2.3 [ 3.391443] HiSax: LinkLayer Revision 2.59.2.4 done. Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Sat Sep 19 17:12:34 UTC 2009 (warning). Activating swap...[ 3.519771] Adding 131064k swap on /dev/xvda1. Priority:-1 extents:1 across:131064k done. Checking root file system...fsck 1.41.3 (12-Oct-2008) /dev/xvda2: clean, 286203/10485760 files, 8393649/41943040 blocks done. [ 3.833244] EXT3 FS on xvda2, internal journal Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Sat Sep 19 17:12:35 UTC 2009 (warning). Cleaning up ifupdown.... Loading kernel modules...done. Setting up LVM Volume Groups Reading all physical volumes. This may take a while... . Checking file systems...fsck 1.41.3 (12-Oct-2008) done. Setting kernel variables (/etc/sysctl.conf)...done. Mounting local filesystems...mount: none already mounted or /dev/pts busy mount: according to mtab, devpts is already mounted on /dev/pts failed. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...[ 5.890618] NET: Registered protocol family 10 [ 5.890893] lo: Disabled Privacy Extensions if-up.d/mountnfs[eth0]: waiting for interface eth3 before doing NFS mounts (warning). if-up.d/mountnfs[eth0]: waiting for interface eth2 before doing NFS mounts (warning). Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ SIOCSIFADDR: No such device eth3: ERROR while getting interface flags: No such device eth3: ERROR while getting interface flags: No such device Bind socket to interface: No such device Failed to bring up eth3. Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ [ 7.611998] Fatal DMA error! Please use 'swiotlb=force' [ 7.612033] ------------[ cut here ]------------ [ 7.612036] kernel BUG at arch/x86/kernel/pci-nommu-xen.c:70! [ 7.612040] invalid opcode: 0000 [1] SMP [ 7.612044] CPU 0 [ 7.612046] Modules linked in: ipv6 hisax crc_ccitt isdn slhc evdev ext3 jbd mbcache dm_mirror dm_log dm_snapshot dm_mod raid456 async_xor async_memcpy async_tx xor raid1 md_mod r8169 thermal_sys [ 7.612073] Pid: 1259, comm: ifconfig Not tainted 2.6.26-1-xen-amd64 #1 [ 7.612076] RIP: e030:[<ffffffff80210dba>] [<ffffffff80210dba>] gnttab_map_single+0xf8/0x104 [ 7.612085] RSP: e02b:ffff88003e8f9ce8 EFLAGS: 00010292 [ 7.612089] RAX: 000000000000003e RBX: 000000020c7de000 RCX: 00003232000027d8 [ 7.612093] RDX: ffffffffff5f7000 RSI: 0000000000000000 RDI: 0000000000000000 [ 7.612101] RBP: 0000000000000812 R08: 0000000000000000 R09: ffff880001bc9080 [ 7.612105] R10: 000000000000003c R11: 000001000000003b R12: 0000000000000600 [ 7.612108] R13: ffff88003fd5b870 R14: 00000000000000e0 R15: 0000000000000600 [ 7.612114] FS: 00007f2852d866e0(0000) GS:ffffffff80539000(0000) knlGS:0000000000000000 [ 7.612119] CS: e033 DS: 0000 ES: 0000 [ 7.612122] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.612126] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 7.612130] Process ifconfig (pid: 1259, threadinfo ffff88003e8f8000, task ffff880001472a80) [ 7.612134] Stack: 0000000000000000 ffff88003e48c880 ffff880001488e00 0000000000000000 [ 7.612141] 0000000000000002 ffffffffa000634f 0000002000000000 0000000000007ff0 [ 7.612147] ffff88003e338000 ffff88003e338700 000000e03e338000 ffff88003fd5b800 [ 7.612152] Call Trace: [ 7.612160] [<ffffffffa000634f>] ? :r8169:rtl8169_rx_fill+0x13a/0x1ae [ 7.612169] [<ffffffffa00071b1>] ? :r8169:rtl8169_init_ring+0x64/0x93 [ 7.612175] [<ffffffffa000748f>] ? :r8169:rtl8169_open+0xaf/0x1d8 [ 7.612180] [<ffffffff803c7dc2>] ? dev_open+0x6c/0xa0 [ 7.612185] [<ffffffff803c696a>] ? dev_change_flags+0xa6/0x15c [ 7.612190] [<ffffffff80409959>] ? devinet_ioctl+0x242/0x59d [ 7.612197] [<ffffffff802766b4>] ? handle_mm_fault+0x5f8/0xc46 [ 7.612202] [<ffffffff803ba825>] ? sock_ioctl+0x1d4/0x1f8 [ 7.612206] [<ffffffff80296659>] ? vfs_ioctl+0x21/0x6b [ 7.612210] [<ffffffff802968eb>] ? do_vfs_ioctl+0x248/0x261 [ 7.612215] [<ffffffff80296955>] ? sys_ioctl+0x51/0x70 [ 7.612219] [<ffffffff8020b528>] ? system_call+0x68/0x6d [ 7.612223] [<ffffffff8020b4c0>] ? system_call+0x0/0x6d [ 7.612226] [ 7.612228] [ 7.612230] Code: eb 05 ba ff ff ff ff 48 c1 e3 0c 81 e5 ff 0f 00 00 48 f7 d2 48 8d 04 2b 48 85 d0 74 12 48 c7 c7 a6 c0 4a 80 31 c0 e8 a6 c8 01 00 <0f> 0b eb fe 5a 5b 5d 41 5c 41 5d c3 55 48 89 f7 89 d5 53 31 db [ 7.612267] RIP [<ffffffff80210dba>] gnttab_map_single+0xf8/0x104 [ 7.612271] RSP <ffff88003e8f9ce8> [ 7.612285] ---[ end trace 4a6d1b9c8782a2b3 ]--- /sbin/dhclient-script: line 139: 1259 Segmentation fault ifconfig $interface inet 0 up [ 16.449985] eth0: no IPv6 routers present #### LOG with to different NIC's: # xm start webserver -c [ ... ] Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/fan.ko): No such device WARNING: Error inserting processor (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/processor.ko): No such device [ 1.128572] thermal: Unknown symbol acpi_processor_set_thermal_limit FATAL: Error inserting thermal (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ 1.334723] 3c59x 0000:00:01.0: enabling device (0000 -> 0003) [ 1.335048] 3c59x: Donald Becker and others. [ 1.335053] 0000:00:01.0: 3Com PCI 3c905C Tornado at ffffc20000024800. [ 1.365028] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 1.365208] r8169 0000:00:02.0: enabling device (0000 -> 0003) [ 1.365747] eth2: RTL8169sb/8110sb at 0xffffc20000026400, 00:14:d1:17:fb:b8, XID 10000000 IRQ 22 done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Loading[ 1.428317] md: raid1 personality registered for level 1 Success: loaded module raid1. [ ... ] The rest of the log is identical. # cat /etc/xen/webserver.cfg # # Networking # #dhcp = 'dhcp' #vif = [ 'mac=00:16:3E:39:2D:0A', 'mac=00:16:3e:66:bf:1f' ] vif = [ 'mac=00:16:3E:39:2D:0A' ] pci = [ '0000:03:05.0', '0000:03:06.0', '0000:03:07.0' ] #pci = [ '0000:03:05.0', '0000:03:06.0' ] # DomO (master) extended info: # lspci: 03:05.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) 03:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 03:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) # cat /boot/grub/menu.lst [ ... ] title Xen 3.2-1-amd64 / Debian GNU/Linux, kernel 2.6.26-2-xen-amd64 root (hd0,1) kernel /xen-3.2-1-amd64.gz module /vmlinuz-2.6.26-2-xen-amd64 root=/dev/mapper/system-server ro console=tty0 pciback.hide=(0000:03:07.0)(0000:03:06.0)(0000:03:05.0) module /initrd.img-2.6.26-2-xen-amd64 title Xen 3.2-1-amd64 / Debian GNU/Linux, kernel 2.6.26-1-xen-amd64 root (hd0,1) kernel /xen-3.2-1-amd64.gz module /vmlinuz-2.6.26-1-xen-amd64 root=/dev/mapper/system-server ro console=tty0 pciback.hide=(0000:03:07.0)(0000:03:06.0)(0000:03:05.0) module /initrd.img-2.6.26-1-xen-amd64 [ ... ] I don't know where to send this error, so I have sende it to XEN-Bugs and Debian Bugs. -- Med Venlig Hilsen / Best regards Henrik Dige Semark Attachment:
hds.vcf Attachment:
smime.p7s _______________________________________________ Xen-bugs mailing list Xen-bugs@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-bugs
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |