Xen project Mailing List

2013/3/19 Agi Subagio <agi@xxxxxxxxx>

Is there any direct download link to that xs-tools.iso or the pv driver .exe file? I'm still unable to apply the XS61E010 hotfix.
This is the last try before I switch back to XCP 1.1, because I already compiled i350's driver for it.

On 19/03/2013 4:08 PM, hook wrote:

> I already use "Citrix Tools for Virtual Machines" for my W2K3R2 VM which is XS61 Legacy Tools. But still hang when I try to copy very big files (>5GB).
> I could not manage to apply XS61E010 patch. So I use "xenlegacy.exe" signed by Citrix Systems Inc. at 24 November 2012. I took that file from XCP 1.6 iso, folder client_install.
> Is it the same file?
>

No, they dos not.

Problem with various Windows VMs exactly inÂÂ"xenlegacy.exe" signed by Citrix Systems Inc. at 24 November 2012

Just to check issue reduce number of vCPU to 1 in mentioned VM and try copy process again. Everything should work fine... and slow...

So, you have to get xen-tools fromÂXS61E010 hotfix. It is different version - just renamed XS 60Exx hotfix.

2013/3/19 Agi Subagio <agi@xxxxxxxxx>

Quote from CTX135009:

How Can I Check Whether My VM is Running Legacy or Standard Tools?

To check what Tools a Windows VM is running, click theÂStartÂbutton, thenÂControl Panel, then (depending on the version of Windows)Add/Remove Programs, orÂPrograms and Features, orÂUninstall a Program. If "Citrix Tools for Virtual machines" is listed the Legacy Tools are installed. If "Windows Driver Package Citrix Systems Inc. (xenbus) System" is listed then the Standard Tools are installed.

I already use "Citrix Tools for Virtual Machines" for my W2K3R2 VM which is XS61 Legacy Tools. But still hang when I try to copy very big files (>5GB).
I could not manage to apply XS61E010 patch. So I use "xenlegacy.exe" signed by Citrix Systems Inc. at 24 November 2012. I took that file from XCP 1.6 iso, folder client_install.
Is it the same file?

I think I'm going back to XCP 1.1 until XCP 2.0 is out. It's much easier to prepare i350 driver compilation then patching XCP 1.6 VM.

On 19/03/2013 2:16 PM, hook wrote:

AFAIK, You can't installÂXS61E009ÂUpdate on to XCP 1.6. I've already asked here about the way to implement binary update from Citrix to XCP, but no luck.

So you just would install lecacy xen-tools (orÂXS61E010) to your Windows system to avoid known bugs in some configuration.

2013/3/19 Agi Subagio <agi@xxxxxxxxx>

Hi,

I tried to digest the posts in the thread and looked into this Citrix's KB:
http://support.citrix.com/article/CTX135099
http://support.citrix.com/article/CTX136252
http://support.citrix.com/article/CTX136253

Let me clarify, I must doing these steps:
- install XCP 1.6 from the beginning
- install hotfix XS61E009 and hotfix XS61E010, then I have two version of xs-tools iso in my host (standard and legacy)
- import W2K3R2 VM
- make sure there is no XCP 1.1 Standard Tools or XCP 1.6 Standard Tools in it
- install XS61E010 Legacy Tools into W2K3R2 VM
- and I have to do this on each W2K3R2 VM

I would try first.

regards,
Agi

On 18/03/2013 8:53 PM, Denis Cardon wrote:

Hi Agi,

Thanks for reply... I will read it first.
Do you mean p2v drivers is in xs-tools.iso?
fyi, all of my W2K3 VMs use 2-4 VCPUs.

Yes that's it, you should re-install the pv driver with a recent enough build of xs-tools.iso.

I have a dozen win2k3 running fine on XCP 1.6, so "it should work"(tm) for you too! In the citrix thread I sent you, you can find the exact build that address this issue.

The recompilation of a driver is not very hard either once you got used to it, but it would be a pity not to get on with XCP1.6, the Citrix team did a tremendous work on this release.

Cheers,

Denis

On 18/03/2013 5:04 PM, Denis Cardon wrote:

Hi Agi,

> I have a new server with onboard Intel i350 Gigabit Ethernet, but XCP

1.1 did not detect that card. Previously I install XCP 1.6 on it, but my
VM (Windows) always hang randomly and hard to reboot/shutdown via
XenCenter, so I want to use XCP 1.1 to that server. How to compile
igb-4.1.2.tar.gz source code for XCP 1.1?

I had a issue recently with a win2k WM crashing after upgrade to
XCP1.6. There has been an issue with win2k win2k3 vms that is
explained in the post below (long post).

http://forums.citrix.com/thread.jspa?threadID=314477&start=105&tstart=0

Summary :
* For win2k3 and above vms, upgrade p2v drivers.
* For win2k vms, short workaround is to have only one vcpus in the VM.
(indeed, the new driver does not want to install on win2k per
citrix/windows EOL policy). If you definitly need more than one vcpus
in your win2k vm, you'll have to tweak a little more I guess.

If you still want to recompile, you have to install kernel headers
from source iso, enable centos repo, install build tools and compile
your driver. But I'd recommend to give one more try to XCP 1.6.

Cheers,

Denis

--
This message has been scanned for viruses and dangerous content
by MBS MailScanner, and is believed to be clean and safe.

_______________________________________________
Xen-api mailing list
Xen-api@xxxxxxxxxxxxx
http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api

--
WBR

Sergey Kruchatov

--
This message has been scanned for viruses and dangerous content
by MBS MailScanner, and is believed to be clean and safe.

--
This message has been scanned for viruses and dangerous content
by MBS MailScanner, and is believed to be clean and safe.

_______________________________________________
Xen-api mailing list
Xen-api@xxxxxxxxxxxxx
http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api

--
WBR

Sergey Kruchatov

--
This message has been scanned for viruses and dangerous content
by MBS MailScanner, and is believed to be clean and safe.

--
This message has been scanned for viruses and dangerous content
by MBS MailScanner, and is believed to be clean and safe.

_______________________________________________
Xen-api mailing list
Xen-api@xxxxxxxxxxxxx
http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api

--
WBR

Sergey Kruchatov

Re: [Xen-API] XCP 1.1 and Intel i350 Gigabit

How Can I Check Whether My VM is Running Legacy or Standard Tools?