Hi Matthew,
After setting those parameters, you probably need to re-plug the VIFs (unplug + plug), or reboot the VMs, for the setting to take effect. You can check if the "rate" key in xenstore is set (xenstore-ls -f | grep rate) to confirm.
Cheers, Rob
Hey everyone,
I'm currently testing and documenting the qos parameters for VIF interfaces. I've set up two VMs with VIF interfaces attached to an internal network. I've set the following qos parameters on each VIF interface.
xe vif-param-set uuid=<VIF UUID> qos_algorithm_type=ratelimit xe vif-param-set uuid=<VIF UUID> qos_algorithm_params:kbps=100 iperf is showing me bandwidth rates between the two VMS that aren't limited to 100 kbps. Am I missing something?
-- - Matthew Spah Computer Information Sciences Tutor for Everett Community College Electronic Monitoring Jr. Systems Engineer for Ocean Systems Inc Xenapi Admin Project Member http://xenapiadmin.com
CompTIA Security+ Certified and Cisco CCNA Certified Arlington, WA Cell 425-319-8676 "And all we ever were Just zeroes and ones" - Trent Reznor
"If you want to make enemies, try to change something." - Woodrow T. Wilson
_______________________________________________ Xen-api mailing list Xen-api@xxxxxxxxxxxxx http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
|